similar to: PRI(E1) Call recording with Digium cards?

Does there exist a text file with all the 'standard' Asterisk voice messages? I'm planning to get them recorded in dutch, but need to know the exact text of each prompt... Michiel

I have tried for over a month off and on to get iaxtel for inbound to work... and tonight after alot of troubleshooting we noticed this: iaxtel inbound will use the last entry in your iax.conf to auth against. So if [iaxtel] is at the top and say [voicepulse] at the bottom. An inbound call will try to auth against that [voicepulse] entry even with the [iaxtel] entry at the top of the file. Has

I have experienced lots of apparently dropped packets (in other words, lots of short interruptions of what the other party tries to tell me) with a GS102 and chan_capi. The GS102 is connected through a lightly-loaded switch directly connected to the * server, so bandwidth/latency shouldn't pose a problem. Funny thing is that the switch indicates 10mbit on the GS102 port - is that correct?

I have updated the voice prompts (mostly small fixes, but still work left to be done - however, it's usable now, I'd say) and the patch file (to current CVS) for Asterisk-in-Dutch. As far as I can tell, all of the grammar work is now in - if anyone has feedback to share, please do so before I spend lots of time cleaning up the patches so they can be integrated back.

Hi, For various reasons a customer of mine is moving from a SER-based to an Asterisk-based installation, mostly because of problems with SIP devices behind NAT trying to reach each other and because it's easier to do accounting when all calls go through Asterisk (canreinvite=no is the idea). The database-based SIP registration mechanism of Asterisk seems to have one shortcoming - it

Hi! I have a dataset that looks like this: 0.0 14 0.0 3 0.9 12 0.73 15 0.78 2 1.0 15 0.3 2 0.32 8 ...and so on. I.e. a value between 0 and 1, and a number I would like to plot this in a histogram-like manner. I would like to have a set of bins, each 0.1 wide, and plot the sum of values in column 2 that falls within each bin. I.e, in this case I would like the first bin, 0.0, to have the

I'm coming to Paris Dec 19. I was wondering if there was any interest in having an Asterisk get together in Paris sometime near there. Any one out there interested? Anyone in Paris who could help organize something like that? :) Mark

I am still having unacceptable echo on my X101P and twidling with the rx/tx gain levels and echo settings appears to have no discernable effect. Some questions for those who may have more significant electrical engineering background than I. 1. This impedance match thing ... will it affect this solution having other phones in parallel with the X101P? This is done so that I can test while not

Does anybody have useful tips on creating good quality recordings for use with prompts in asterisk? I'm interested in hearing input on hardware (mics, dats, sound cards, etc) and software (recording software, dsp) as well as recording techniques. Jerimiah Tularosa Communications

Hi! I have a set of 49 pairwise comparisons that I have done. From this I would like to plot either histograms or the density plots of the values I get. Now, I can plot one histogram per comparison, but I have problems getting the output I want. When plotting like I normally would do: histogram(~percid | orgA_orgB, data = alldata) I get the histograms next to eachother in a boxlike shape.

Hi, I use asterisk branch 1.4 and gui 1.4 as well. I have the following situation: When I try to make gui configuration by http://localhost:8088/asterisk/static/config/setup/install.html I can see that application logs my user correctly but there is no browser window shift to the next page. it stays at the logging one. I get the following info in the console: [Feb 4 09:33:09] == Parsing

Anyone successfully implemented a solution for allowing ZapBarge call monitoring only for a specific group of agents calls? The issue I see is that the feature only works on zap channels, and all of the agents (in many cases) are IP phones. Allowing ZapBarge and ZapScan on the TDM PSTN (t100p) interface has privacy issues for senior managers, but would allow all outbound zap calls to be

Hi, Is it possible to monitor conversation of logged in Agents? Currently I am using ZapScan to monitor incoming calls, but I would like to monitor individual agents. raj

I'm testing * (CVS-09/16/03-02:07:49 with zaprtc 0.0.1) with Fritz!PCI (chan_capi 0.3.0), and have a couple of funny things - I wonder if anyone else has seen them: - Now and then, * just exits. Until now I had lowish-level verbosity on, so all I saw was 'Executing last minute cleanups'. What can trigger * exits? (in other words, what should I pay attention to when attempting to

Okay, I can't find what might be causing this. Here is what I got: Asterisk server hooked up to a digital T1 line (full 24-channel) via a Digium card. Verizon has turned on caller ID on the first line (I can guarantee it is on as I can hear the FSK tones on this line but not the others). Using zttool an ZapScan() I have determined the following: 1) The RxB/RxD bits toggle from 1 to 0

We are looking at using Asterisk as a call recording server for an Avaya VoIP S8700 system in a multi-site VoIP Call Center. All calls will be coming in to one location and sent out via VoIP to other call centers. What kind of specs should we be looking at purchasing for our Asterisk server to be record up 200-300 calls simultaneously? Linux runs in 64 bit architecture, but does Asterisk

From: Malcom Kemp Sent: Wednesday, April 25, 2007 11:19 AM To: 'asterisk-users@lists.digium.com' Subject: AsteriskNOW generation of zapata.conf file I am a new user of Asterisk, and an trying to use AsteriskNOW. The test system is dual processor, so I am using the beta 4 version. I am currently trying to manually configure, as the GUI does not seem to let me accomplish what I need.

Everyone we have a few new things to give back to the asterisk community. http://bugs.digium.com/bug_view_page.php?bug_id=0002379 http://bugs.digium.com/bug_view_page.php?bug_id=0002380 http://bugs.digium.com/bug_view_page.php?bug_id=0002381 These include app_chanspy, the ability to spy on ANY bridged call taking place inside asterisk. NOT just ZAP as with ZapScan/Barge. Native format_* files

Hi list; While I am writing my configuration on the .conf files, I would like to know if I wrote the command in write syntax (form), there is not any way to check if I am writing correct or not (other than checking my documentation)? Also, is there any method for searching on specific topic about asterisk (a command details and usage), from my computer (like help and so on)? Regards Bilal

Hello, I've search through all of the lists and cannot find any descriptions of live monitoring (monitoring a phone call going on between an extension and a zaptel channel live from another extension while the monitoring phone is muted). I am aware of the monitor function which is actually a call recorder, but I'm looking for live monitoring from a muted extension. is this easily