similar to: 'asterisk' displayed on my Cisco 7960 & 7912...

The problem is some calls from the PSTN have hidden caller id so if you want to change it to something else then modify chan_sip.c #define CALLERID_UNKNOWN "Asterisk" I've changed mine to: #define CALLERID_UNKNOWN "Unknown" -----Original Message----- From: Shaun Ewing [mailto:sewing@gmail.com] Sent: 22 September 2004 14:16 To: Asterisk Users Mailing List

Hi everyone! Who can tell me how I can access my voicemail? When I dial the voicemail on my Cisco 7960 I get access, but when trying to enter my mailbox number it seems that Asterisk doesn't 'get' any of the keys I press. DTMF problem perhaps? Any suggestions on how/where to fix this...? Regards, Evert

Hi everyone! I have a problem... We have received a couple of phone numbers for voip from a local voip-provider. The work fine directly with a Cisco 7960, but so far I've not been able yet to integrate them into Asterisk. I've tried: /etc/asterisk/extensions.conf ***** [ip-incoming]

Hi everyone! I'd like to create the following: a user picks up the phone (gets a dial tone), dials '0' for an 'outside' line, gets a second (different?) dialtone, and is able to enter an external phone number. How do I implement this in extensions.conf...? Regards, Evert

Hi! If I install a CAPI-compatible ISDN-card in my server, will that: a) enable me to connect that server to the public phone net b) allow me to connect an ISDN phone to the server and use it as a SIP-phone c) all of the above? Regards, Evert

Hi everyone! situation: Asterisk-server A: 192.168.11.6 Asterisk-server B: 192.168.2.44 server B contains a register => username:password@192.168.11.6 But... when I boot it, I get: Registered to '192.168.11.6', who sees us as 10.138.3.2:4569 Why doesn't server A see server B as 192.168.2.44?? All other traffic going over these lines has no problems with this. The

Hi All, Just a heads up - I was looking around the Cisco FTP a little while ago and noticed that the SIP 7.2 images for Cisco IP Phone 7940/7960 were released yesterday (16th August). No new features - all bug fixes according to the release notes. I've already started using it. I thought those of you running the Cisco phones and the appropriate access who didn't yet know would like to

Hi all, I have been looking at various alternatives for a system that runs several Linux & Windows guests. So far my favorite choice would be OpenSolaris+ZFS+RAIDZ+VirtualBox. Is this combo ready to be a host for Linux & Windows guests? Or is it not 100% stable (yet)? Greetings, Evert This message posted from opensolaris.org

Hello all, I know this isn't strictly Asterisk, but I'm sure that there are more people here using the Cisco 7960 w/ SIP, so I thought I'd post here. I've just bought a Cisco 7960 phone to use with Asterisk. It came with the CallManager image on it. I've got the 4.4 SIP images (P0S3-04-4-00). If I put "P0S3-04-4-00" in the OS79XX.TXT file, the phone downloads this

What headsets have people found work well with the Cisco 7940 and 7960 phones? To date, I have tried a couple of the headsets within the Plantronics H series (H41-N), and noticed that the volume of my speaking is lower over the headset than on the regular handset. I am currently looking for headsets that are known to work well. I do know that Cisco lists the H-91 and H-101 as certified to

Hi all! I'm trying to have asterisk route all outgoing calls out via my VOIP provider. exten => _NXXXXXXX,1,Dial,SIP/BYEXTENSION@VOIP seems to have them to in the direct direction. However, debug shows that my asterisk doesn't identify itself correctly: Sip read: SIP/2.0 100 Trying From: "Evert"<sip:asterisk@[my IP]>;tag=as0aca53fa To: <sip:[dialled

From a 'sip debug': Sip read: SIP/2.0 100 Trying From: "Evert"<sip:[username]@[my ext. IP]>;tag=as6e18534e To: <sip:[dialled number]@[SIP server of VoIP provider]> Call-ID: 6cbf41c25281f08b2e7bbc5043061975@[my ext. IP] CSeq: 102 INVITE Via:SIP/2.0/UDP [my ext. IP]:5060;branch=z9hG4bK4fd1045b Content-Length:0 7 headers, 0 lines Sip read: SIP/2.0 403 Forbidden

Typo in your OS79XX.TXT P00 ? instead of P0S !? -----Original Message----- From: Michael L?jtnant [mailto:ml@zyxel.dk] Sent: 17 August 2004 13:31 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Cisco 7.2 firmware for SIP 7940/7960 released Hi Shaun, Saw you post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you

Hi all! Quite a mystery. The following happened when I was on holiday, and no one else has changed any configs of either Asterisk or the Cisco's in the building... The situation: Incoming works fine on all phones. Outgoing only works from non-Cisco phones. When calling from a Cisco phone to an external phone, all the Cisco-user hears is a ticking crackle and after about a minute the phone

Hi all! We use a PHP-portal for management of our projects & contacts. Now I would like to make it possible to dial contacts directly from the portal. Since users have to log in, I can use that to determine which office phone the call should originate from. And the number-to-be-dialed is of course also listed. How do I commence here? I'm pretty sure others have done this already, so

Hi all! I'm in the process of configuring an Asterisk server here that, based on which number was called, should send calls to different extensions: 913 - 11111 -> ext. 1 913 - 22222 -> ext. 2 913-11111 & 913-22222 being 2 (of the) numbers we have coming in to our system via our VoIP hosting provider. The config used here is based on Asterisk at home, so it includes also the

Hi, Today I was assigned a block of IPs by my ISP and decided to move the Asterisk box onto a public IP. I am also using 10.1.0.0/16 on my LAN, with the IP phones under 10.1.4.0/24 There is clear routing between the public and private IP ranges (no NAT). Private can see public and vice-versa. I changed the proxy config in the phone to point to the new IP address. Previously the 7960 worked

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

Hi to all, I've just received my Cisco 7905G ipphone. I want to connect it to asterisk server but it looks that it has been preloaded with sccp protocol, so I guess I need H.323 or SIP firmware image of some kind. I have a working tftp server on my asterisk box also....What do I need to do now to get things wokring? Thanx in advance, Victor...

Hi! Problem with my 7960. Outgoing calls work, but incoming don't. A 'sip show peers' gives: Name/username Host Dyn Nat ACL Mask Port Status 105/105 192.168.2.175 D 255.255.255.255 5060 UNREACHABLE Is there something wrong with the config on that phone? If so, who can tell me what? Regards, Evert