similar to: SIP Phone dropping calls, SIP Softphones working fine

Hello, Cedric Hans has released an UNISTIM channel driver for asterisk (stable). You can download it at : http://mlkj.net/asterisk/chan_unistim-0.9.2.tar.bz2 Copy of README : This is a channel driver for Unistim protocol. You can use at least Nortel i2004 phones with it. Only few features are supported : Send/Receive CallerID, Redial, SoftKeys, SendText(), Music On Hold, Message Waiting

I've been trying to look up information on upgrading firmware on a nortel i2004 ip phone. I have this phone leftover from a trial, and it's supposed to be upgradable to current firmwares. Since I also run a DMS I was able to login to nortel's site and get all the firmware files, but All the NTP's regarding firmware upgrading these are how to tell you BCM to send the file to it.

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

I am totally new to this project, I have been trying to set it up now for almost a whole day, and can not understand what is wrong. The following error appears when my phone tries to register: Oct 6 19:08:30 NOTICE[98310]: chan_sip.c:7519 handle_request: Registration from '<sip:2201@192.168.0.5;user=phone>' failed for '192.168.0.253' What exactly does this error mean,

Get the CPU architecture of the specified cluster, and error out in case the architecture of the guest is not the same as the cluster one. --- .../ovirtsdk4/types.py | 16 ++++++++++++++++ v2v/output_rhv_upload.ml | 18 +++++++++++++++++- v2v/rhv-upload-precheck.py | 5 +++++ 3 files changed, 38 insertions(+), 1 deletion(-) diff

Add the missing objects, methods, variables, and relations among the various objects. Followup/fixes commit c49aa4fe01aac82d4776dd2a3524ce16e6deed06, and commit 8118f28b6ff93c11f92fd65873285c2eba10ea0a. --- .../ovirtsdk4/__init__.py | 25 +++++++++++++------ .../ovirtsdk4/types.py | 19 ++++++++++---- 2 files changed, 31 insertions(+), 13 deletions(-)

Is anyone successfully using this phone with Asterisk? There is a lot mentioned about CISCO but nothing about Nortel... Alex.

This are "suppose" to be SIP based phones. I just got one to play with, no docs, no nothing. before I start spending time trying to sort it out I thought I'd ask to see if anyone had made one work with AST, and if they have any pearls of wisdom. mucho thanks

I did the following: - chan_capi-0.3.5/Makefile: uncommented CFLAGS+=-DDEFLECT_ON_CIRCUITBUSY - recompile asterisk + chan_capi - added /etc/asterisk/capi.conf: deflect=0800123456 ; some 0800 test number - in etc/asterisk/extensions.conf under [tcom-in]: exten => 98765,1,capiCD(0800123456) - made both b channels busy by outcalling on both lines (ISND BRI) - called my msn (98765) by mobile

Hello, I am wondering if anyone is using the Nortel 2001 2002 or 2004 phones on their asterisk implementation. My local dealer says they are not compatible with any open source implementations. Is there a phone compatibility list somewhere? Cheers Cian

I'm trying the latest bri 0.1.0 RC2 drivers. In announce I see implementation of so long waited Transfer feature. But I can't make it work. When the person who is making transfer after talking with second party press "R" second time to establish 3 way call the person to which call supposed to be transfered being disconnected. Any ideas whats wrong? Thanks, Dmitry

Dear Asterisk-Users, does anyone know how to prevent non-free calls to Broadvoice Unlimited World ? This first thing I did is I accept only that coutry prefixes (in extensions.conf) that are in the Unlimited World dialplan. I was also able to filter out german cell phones (cause they begin with 1 and no landline is beginning with 1). US is also no problem as cell phone calls are unlimited

I'm still not getting my outbound to work. I've seen two patches relevant to broadvoice for chan_sip.c which apparently have already been added to CVS. I'm dropping all outgoing calls after ~30 secs. Asterisk doesn't seem to know they're gone though. I called my cell w/ broadvoice and turned on sip debug AFTer the call had physically dropped: *CLI> sip show registry

Hi, i'm having problems with broadvoice incoming calls. I can perfectly place calls but my Asterisk Box is having problems when registering with the SIP Proxy. Sometimes it register and the call gets into asterisk, but without sound (seems to be NAT problems) and sometimes its not possible for asterisk to receive the calls. Everything was working great exactly for a month, but a week ago it

I'm experiencing a "Failed to authenticate on INVITE" error (see output below) whenever I try to MAKE a call through the Broadvoice account. I noticed some others had the same problem but it went away when they rebuilt Asteris w/ a new version. N such luck for me! I'd be grateful for any assitance. Here's what I've done so far: 1) I downloaded the latest stable

In a 1.2 release of asterisk, I've had no problem connecting to a Broadvoice SIP peer, to allow routing outgoing calls from Asterisk to Broadvoice. Now, with the same SIP configuration, I cannot establish the peer. I've enclosed a SIP log in the hope that someone can help me analyze this failure. I'd guess the issue is NAT related and wondering if someone can spot a problem in the

Apologies if this is a repeat: I trawled through the archives and couldn't find a reasonable answer, so I'm asking here. I have an Asterisk install connecting from behind a NAT device (DSL modem) to a SIP proxy (in my case, Broadvoice). I have an sjphone softphone on a Windows PC also behind the NAT device that connects to the Asterisk install, and using this setup I've been pretty

I have searched the list and cannot find a sip 400 solution posted that solves my problem. If anyone has any thoughts or suggestions on the following I would greatly appreciate it. I didn't have this error before Broadvoice made their changes this weekend. Now when I make a call it connects but, I cannot hear anything on the other end... The full message I have is: 8 headers, 0 lines

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Hi all, I am using * as a PBX for a Broadvoice VoIP account. It had been working well since about last November, although not perfectly (similar disconnection problems, although I am pretty sure it had to do with my PPPoE setup, but I think these issues were resolved). As of a few weeks ago, though, I started having serious problems. Basically, I can start up * and connect to Broadvoice and