similar to: Press 9 to dial by name

I am setting up my * for at home office and still have analog phones attached and answer from those analog phones and not necessarily through the pbx. I found that with the X100P cards, they see the 2nd ring and will be ready to answer the line. I used a Wait to pause and allow another 2 rings before * answers. But found that if we answer the line after the 2nd ring and before the 4th, * still

Folks, Apologies ahead of time if this has already been asked (read the list for the last month looking for something similar). I have been trying to get the Background command to work with no joy yet. Here is what I am trying to do: 1. Answer the call. 2. Play the message in the background, while waiting on DTMF from user. 3. If I get a "1", then interrupt the message and dial the

I want to limit the number of simultaneous incoming calls that my IAX DID can accept to, say, 2. The IAX DID provider sets no limit. The code below does work, but when the limit is in effect, new callers hear a "call cannot be completed as dialed.." message instead of a busy signal. Maybe this is an issue with the provider, but I do not like this and want callers to hear a busy signal.

Good afternoon gentlemen (and ladies). A costumer of mine has many servers and each one maps their SIP extensions to the others via DUNDi. It works like a charm. SIP extensions can only register at one server, the one they "belong" to. In case one extension wants to call other that is registered in another server, DUNDi takes care of that by calling the other server using IAX2 and G.729

Hello! My setup is Asterisk 1.2.26 with Zaptel 1.2.22.1, libpri-1.2.7 on Fedora Core 4. I am making automatic call-out campaign with this setup on 4 PRI. The scripts for this: ==================================================================== caller php script write this to outgoung folder: fwrite($outfile,"Channel: Zap/g1/$phonenumber\n"); fwrite($outfile,"MaxRetries:

I use the following macro for my extensions. It only works with Zap channels and assumes that any Caller*ID number that is 4 digits is an internal call and all other calls are external calls. Use like this: exten => 1234,1,Macro(std-exten,Zap/4,20) [macro-std-exten] ; ; Caller*ID is 4 digits (internal call) ; exten => s/_XXXX,1,Dial(${ARG1}r2,${ARG2}) exten =>

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

Hello! I have following connections over isdn pri: avaya definity---pri--asterisk--pri-panasonic 500 Just because panasonic 500 can't send user's names. I also want to have reverse callerid for avaya users. But if there is no answer in dial plan: exten => _XXXX,1,Set(CONNECTEDLINE(name)=${DB(names/${EXTEN})}) ;exten => _XXXX,n,Answer exten => _XXXX,n,Dial(DAHDI/g4/${EXTEN})

Auto Callback on Busy Register on Busy I have implemented it as 1- I store Caller and Called party numbers in database when Called part is busy 2- I retrieve it from database and Caller is called by called party when Called party hangs up It is working fine with all kind of SIP phones I have with me basic configuration for extensions.conf is given and can be accommodated according to

> I'm having an issue deploying softphones into my DUNDi/regcontext > setup. My current design is that all SIP users get registered into a > sipregistration context in the sip.conf. I then have a dialplan > function that includes that and does the dial: > > include => sipregistration > exten => _XXXX,2,Answer() > exten => _XXXX,3,Wait(1) > exten =>

I've lurked for a while, but I think this is one of my first "pleas" for help. I'm having issues where a parked call using the macro below is getting "stuck". Users park the call via a blfxfer key on an Aastra phone. If the call is a blind transfer, it tries to park the call. If it isn't a blind transfer, it tries to unpark the call. Only 2 extensions (2759 and

Hi, I've noticed an unusual behavior on the dialplan execution: assume this DP: exten => _6XXX,1,NoOp(test1) exten => _XXXX,1,NoOp(test2) exten => _XXXX,2,NoOp(test3) If I call 6000 then test1 and test3 NoOps get executed, even though the pattern is different. I've always thought that if I call 6000 it would match the 6XXX pattern, that only has 1 priority, that would get

Hi All. I've been experimenting with SLA on Asterisk 1.4.13 (patched up to 1.4.14). I am using a SIP channel for my "trunk" line. On the whole things are good, but I have noticed that if I misdial an outgoing call, i.e. I get 404 "Not Found" in the SIP trace, then the trunk line just drops, rather than presenting an error tone or message to the user.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Here's one that may be of interest to any upgraders. If you rely on the behavior of gosub you may want to make note of this change. I have an incoming call context: exten => _XXXX,n,GoSub(incoming,${EXTEN},1(${EXTEN})); that is supposed to gosub into the incoming extension at priority 1. Versions before 1.6.0.6 would drop into the

Hello all, I'm having a problem with my intercom function that I use for under-chin paging. I'm running 1.6.2.13 on this server, and we use Linksys SPA-942's for our general phones. I have a global defined which has all the SIP channels concatenated together - this is ${ALL-PAGE-EXTS}. The problem comes when a user is on the line, and someone else uses the intercom function to page

We just finished an upgrade of our Asterisk system to an HA environment on a pair of servers using Linux-HA. As part of the upgrade, we also moved to Asterisk version 1.8.4.3 Most things are working quite nicely on the new system. However, I?m having trouble getting a paging feature to work. In Asterisk 1.4, we simply used the Page() application like this:

Hi There, I have an asterisk an a Digium 4 Port E1 Card On E1 Port No. 1 I have the Telekom PRI On E1 Port No. 2 I have an Alcatel PBX that cannot be changed So I have setup my asterisk between Alcatel and Telekom In extension.conf i configured: [telekom] exten => _9149.,1,Dial,ZAP/g2/${EXTEN}; exten => _9149.,2,Hangup This works great, all incoming calls are directly routed to alcatel

Hi there, I searched in mailinglist and in web, but no answer to my problem... Only this post with no answers: http://lists.digium.com/pipermail/asterisk-users/2004-March/038994.html I'm using CVS Asterisk (05/17/04) with chan_capi 0.3.1. (multiple controller support). In my Asterisk-box there are 2 Fritzcards (module for second card compiled with changes on sourcecode found in the web).

I just got a TE110P up on an XO PRI - everything looks good so far. We've been given a block of 23 numbers for the PRI. If I explictly set the incoming extension in extensions.conf like: exten => 1153,1,Answer or: exten => _XXXX,1,Answer I can get the incoming call. If I try and do: exten => s,1,Answer I'll see something like this: -- Extension '1153' in context

I've got an interesting scenario where transfers while getting an invite seem to break. Here is the scenario: You have a receptionist who has a 6 line phone (in this case, a polycom ip600 - also tested with a Cisco 7960) the receptionist has all six lines available for use (in the case of the cisco I tried registering all lines as one number as well as registering multiple lines and