similar to: Arrgh, Broadvoice, SIP.conf

*sigh* Ok, I have fought and fought with this. I have read all the FAQ's, I have scanned the list archives. I can receive calls on * from my Broadvoice acct, but I cannot place calls... I have the 'World Unlimited' plan, and like 5 area codes that are local to me in Dallas. Can anyone help me? here are my config files... - sip.conf - [general] context=default ;

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

-------- Original Message -------- Subject: Re: [Asterisk-Users] BroadVoice configuration changes for Outbound Date: Sun, 06 Mar 2005 19:11:22 -0500 From: MF Hulber <mark@hulber.com> To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com>, dan@mirrorlynx.com References: <200503060703.XAA12457@comand.net>

I have an idea, tell me if this wouldn't work... I know it's really ugly, but it might help some people until we can get round robin DNS checks for peers... Since * does not do GetHostByName() again until you reload your config, and BroadVoice and I'm sure other sip providers are using round robin DNS, why not create 2 [<your server here>-out] contexts in sip.conf, and then in

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

Hello, Have a weird problem when using asterisk (1.0.6). There are certain numbers I cannot dial when using asterisk with my broadvoice account. No problems with inbound. With outbound calls, I can call some numbers (for example broadvoice customer support number) and unsuccessfully with some. However, when I configure my account directly on x-lite, I dont see these outbound problems. Here is a

All, I signed up for a broadvoice BYOD plan over the weekend (very excited about their offering) and after about an hour I had asterisk registered and was making in and out bound calls. However, the next day (without changing anything) I couldn't call in or out and haven't been able to get it going again. I can connect using a softphone (X-Lite) and make calls in and out

I've tried everything with the * box after this weekend. I have read every document on the problems people are having with them after this weekend as well, but none of them address my problem. I checked my settings in my sips which I have below as well, I have changed the host file a few times, but this was new to me and I never had modified it before. I have and the same results

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Hi, I can't make outgoing calls via Broadvoice. I have tried each and every configuration that was posted to list previously. I am able to receive incoming calls fine. I get the following in asterisk console: ===================================================== asterisk*CLI> show version Asterisk CVS-HEAD-03/10/05-22:51:28 built by vicky@asterisk on a i686 running Linux

Is the Broadvoice service up? I just signed up with them and started receiving calls in no time but could not make calls. And after a few minutes I cannot even place calls. register => [number]:[password]@sip.broadvoice.com [broadvoice] type=peer fromuser=[number] host=proxy.lax.broadvoice.com fromdomain=sip.broadvoice.com context=from-broadvoice dtmfmode=inband any help would be

Since Thursday evening my asterisk box has been failing to register with broadvoice. I haven't changed any of my config files in the last week. Can anyone suggest anything? Asterisk is reporting: *CLI> Aug 28 16:15:17 NOTICE[6150]: chan_sip.c:3914 sip_reg_timeout: Registration for '703XXXXXXX@147.135.8.129' timed out, trying again -- Got SIP response 404 "Not found"

I'm still not getting my outbound to work. I've seen two patches relevant to broadvoice for chan_sip.c which apparently have already been added to CVS. I'm dropping all outgoing calls after ~30 secs. Asterisk doesn't seem to know they're gone though. I called my cell w/ broadvoice and turned on sip debug AFTer the call had physically dropped: *CLI> sip show registry

Hi all, I just upgraded to Asterisk 1.4.18 a few days ago and I don't use Broadvoice TOO often, however I have a Vermont number with them and so my mother in law calls it to talk to my wife once in a while, so that's why it took me so long to notice it wasn't working. Anyway, when she calls she gets a busy signal (as I've tested when calling it from my cell). When I enable

Hello - I've been using Broadvoice with Asterisk for a couple of months with no issues. Today, it has stopped registering. The Sip Debug from CLI is below. It tries to register five times and then gives up. Any suggestions? As you might suspect, I have not been able to get Broadvoice on the phone and usually get cut off after being on hold about 5 minutes. Strategic portions of IP

I'm experiencing a "Failed to authenticate on INVITE" error (see output below) whenever I try to MAKE a call through the Broadvoice account. I noticed some others had the same problem but it went away when they rebuilt Asteris w/ a new version. N such luck for me! I'd be grateful for any assitance. Here's what I've done so far: 1) I downloaded the latest stable

I'm at a loss as to why my * box dosnt want to play nicely with Broadvoice. Here is what my log files are showing: Jul 28 16:33:43 NOTICE[1187]: -- Registration for '2017540019@proxy.dca.broadvoice.com@proxy.dca.broadvoice.com' timed out, trying again Jul 28 16:33:43 DEBUG[1187]: Scheduled a registration timeout # 108 Jul 28 16:33:43 DEBUG[1187]: Stopping retransmission on

Hi, i'm having problems with broadvoice incoming calls. I can perfectly place calls but my Asterisk Box is having problems when registering with the SIP Proxy. Sometimes it register and the call gets into asterisk, but without sound (seems to be NAT problems) and sometimes its not possible for asterisk to receive the calls. Everything was working great exactly for a month, but a week ago it

Hi all, I am trying to configure my Asterisk PBX to connect to a broadvoice account. I want incoming calls to go to the "s" extension and to ultimately have outbound calls routed through my broadvoice account(s). I cannot for the life of me get this to register correctly. I am currently receiving this message on the console: Failed to authenticate on Register to