similar to: unavail and busy.

hello, I have a test setup with 2 asterisk servers, each having a one snom 100 via sip using it. I`m experimenting on how trunking between them would work. I have them setup for RSA authentication which I plan to use in the future. So I`ve setup the keys and servers seem authenticate to each other. One is named phila and other hurricane. Here is what I see on phila: -- Registered

Sorry for all the newbie questions. I really appreciate everyone's help today. Okay I've got outgoing and incoming calls working with no echo. yay! Now I'm having an issue with SIP extension to extension calling. Any time I dial another extension it goes right into voice mail. My extensions.conf is pretty small and rough but, here's what I have right now. Most of it was taken

I am integrating a new server (Asterisk 1.8.2.3, DAHDI 2.4.0) with VOIP only trunks, and this server only has soft phones. When I dial an extension and the phone is not registered, I don't get any ring or progress indications, and eventually the Dial() times out and drops into voicemail (as expected). CLI output: -- Executing [s at macro-StdExten:6] Dial("IAX2/barneveld-2036",

I'm trying to set up my extensions.conf file using some of the existing macros like stdexten, etc. while at the same time having two logically separate virtual PBX's (with no "default" context) and two trunks coming into separate contexts, i.e. one for residence and one for my at-home business. I noticed, however, that macro-stdexten depends on the "default" context:

I added the playback line to my [macro-stdexten] context but when I dail an extension I don't get the "please hold while I try that extension" message. It just dials the extexsion. Do I have a syntax problem somewhere ? exten => 8005,1,Macro(stdexten,8005,Zap/2) exten => 8006,1,Macro(stdexten,8006,Sip/8006) [macro-stdexten] ; ; Standard extension macro: ; ${ARG1} -

Okay everyone - I'm moving away from using sipura 841 phones. I'm starting to test with Polycom IP 501 phones. We plan to upgrade our server to a dual t1 but, for now we have a digium tdm400P with 4 analog lines coming into it. So my question is will upgrading the IP phones with my existing digium tdm400 card be enough to satisfy my users ? or is it really a combo deal needing to

Dear All I want to integrate sugarcrm and asterisk , so when customer call the call center the agent or extension which answers the call , before pickup the phone and talk to customer , view his/her information if it is available. I do this as described below : 1-Setup login username for sugarcrm for each extension 2-Extension Users will login to the sugarcrm. 3-Develop php script to handle new

Hi, we're running Asterisk 1.2.10 and have been randomly being left blank voicemails with long messages that we can't hear. I've searched and searched but cannot find a solution. This is what happens: Internal Server runs Asterisk 1.2.10 where our mailboxes are Incoming Server (behind a firewall) runs Asterisk 1.2.13 and calls are bridged between this server and our internal server.

I thought it was quite easy to implement but I cannot get one-touch recording to work. Here are the changes what I did: I restarted Asterisk after the change (because reload does not work for changes in features.conf). I press *1 on the Polycom IP600 phone to record a conversation but no new wav file appear in /var/spool/asterisk/monitor or elsewhere. Any suggestions? Here is the console log:

I've been banging my head on a brick wall for about an hour now trying to understand why the following doesn't work (which is even provided as an example in the distribution!). The goal is to create a voicemail-only extension not associated with a phone. I'd rather not have an extension dedicated to VoicemailMain(), so I would like the user to be able to hit '*' during

I thought it was quite easy to implement but I cannot get one-touch recording to work. Here are the changes what I did: I restarted Asterisk after the change (because reload does not work for changes in features.conf). I press *1 on the Polycom IP600 phone to record a conversation but no new wav file appear in /var/spool/asterisk/monitor or elsewhere. Test A: Outside line calling in

My dial plan seems to work great - in that when I call extensions 1234 it connects to 1234. Strangely, after the call terminates (the other side hangs up first), Asterisk continues in the same context and then matches to extensions _. which causes an invalid extension error! Why does asterisk not leave the context (called internalmenu) after the remote hangup? Instead, it continues to the

I have Spandsp working fine. Asterisk sees a fax on the zap port and redirects the call to the fax-in area. This works if I have a simple dialing rules that goes answers first and waits 10 secs then goes to the next item. If it hears a fax it goes to the right place. Here is a sample that works. [incoming] exten => 2019,1,Goto(test,s,1) [test] exten => s,1,answer exten => s,2,wait(5)

Hello, I am trying a couple of days before to set up asterisk to redirects an incoming call if the extension dialed is busy without success. I just try to use 'Gotoif' command, with bad luck, it can't do what i want. Anybody could helpme? ani clue will be appreciated. Regards. Ismael.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i have a working Microsoft ISA firewall with buildin H.323 Gatekeeper.... So Far, i got registerd the asterisk on the M$ Gatekeeper... here is the h.323 configuration: ; Open H.323 driver configuration ; [general] port = 1720 bindaddr = 0.0.0.0 allow=all ; turns on all installed codecs dtmfmode=rfc2833 gatekeeper =

Hi, Has anyone managed to create a setup with a Sipura SPA-1001 as a client? Right now I can connect to the device by dialing the extension number but when I try to connect from the phone handset to make an outbound call it gives an unavailable tone. I'm using Line 2 on the SPA-1001 to connect to the local asterisk server, line 1 is used to connect to my VOIP provider until I can get the

Hello all, Just starting to setup asterisk v 1.4.11 and need to run three distinct phone systems for three different companies. So far, I have inbound lines going to the appropriate dial plan within the extensions.conf file. I'm using exten => _X.,1,NoOp(FROM NUMBER: ${SIP_HEADER(TO):5:10}) to determine which number is being dialed by the caller and then using a gotoif to get to

Dear All, I was trying to enable call forwarding, following the steps of the link on voip.org regarding this issue it doesn't work and the phone I am trying to implement on is still ringing. below is my conf in extensions.conf and the CLI output during the process. My configuration is : exten => _*5X.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:2}) exten => _*5X.,2,Hangup exten =>

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Quick question from a newbie, I have asterisk configured to dial IAX extensions (which works). When dialing from one IAX extension (using Firefly) to another IAX extension (also using Firefly), the Firefly client rings on the receiving end and gives the option of accepting or denying the call. However, when I dial in to Asterix using a VoicePulse number and dial the same extension Firefly