similar to: Monitor and AGI - doesn't record much!

Asterisk Monitor seems to be working fine. Though the problem I am having is the two files (in & out) muxing. I added ,m to the string, yet the call records two files still, and I get the resulting error, at the bottom. monitor executing ( nice -n 19 soxmix /var/spool/asterisk/monitor/rec_fr_1624672199_to_621950_at_01122004-13:4 8:23-in.gsm

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Sorry if this was posted yesterday, I was having issues with being auto-unsubscribed because of my spam filter. Not sure if my post made it through. Hi everyone, I'm wondering if I'm missing something obvious here, or if Asterisk just doesn't support what I'm trying to do. It seems like it should be simple, but appearances can be deceiving. I've got an Asterisk box

We've had several customers report since upgrading them to our new Asterisk 1.6.2.17 server (from version 1.4), that their MWI no longer works. No significant changes have been made to their SIP configuration, nor to their ATA configuration. While not exhaustive, these are the ATAs that don't work: Linksys SPA2102 Linksys PAP2T-3.1.15 Thomson 780 Thomson 784 Unfortunately, this

Hi, I want to start recording the caller automatically when the receptionist transfers a new sales lead to 567. I don't want the receptionist to have to press *1 manually for automon. Can someone recommend how best to accomplish this? exten => 567,1,Set(CALLERID(name)=SALES CALL) exten => 567,n,Playback(recorded-for-training) exten =>

1. RE: Start recording automatically when xferring to anextension? (Don Pobanz) Message: 1 Date: Fri, 25 May 2007 11:54:33 -0500 From: "Don Pobanz" <dpobanz@hastingsutilities.com> Subject: RE: [asterisk-users] Start recording automatically when xferring to anextension? To: "Asterisk Users Mailing List - Non-Commercial Discussion"

I have a system with two 4 port T1 cards, with 5 PRI's configured. Each PRI is configured as an individual PRI and belongs to it's own group (groups 1-5) This system is handling roll-over from another system, where any error in processing the call on that system results in it being sent here. This mainly results in all calls resulting in a busy being sent for retry here. I then

Why is it that newcomers always feel like inserting 'Answer' is a necessary step in their extension.conf entries? >[voiptalk.org] >;forwards any calls starting with an "8" thru voiptalk.org >exten => _8.,1,Answer >exten => _8.,3,SetCIDNum(55555555) >exten => _8.,4,SetCIDName(My Name And Surname) >exten => _8.,5,Dial(SIP/${EXTEN:1}@voiptalk.org,,g)

I have the following dialplan: ; calls prefix by '8' are recorded exten = _8[01]./_251,1,Set(something=shortened) exten = _8[01]./_251,n,Set(WAV=filename) exten = _8[01]./_251,n,Monitor(wav,${WAV},mb) exten = _8[01]./_251,n,Dial(mISDN/2/${EXTEN:1},,g) exten = _8[01]./_251,n,System(send-recorded-conversation ${WAV}.wav ${EXTEN:1} emailaddr) exten = _8[01]./_251,n,Hangup() The idea is that

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

Hi, I can't get dial-out working. I'm trying to call 523936. Is there something wrong with my setup here? Could someone please give me a few pointers? Regards, Norman Zhang [fwd-out] exten => _8.,1,SetCallerID(${FWDUSERID}) exten => _8.,2,SetCIDName(${FWDUSERNAME}) exten => _8.,3,Dial(SIP/${EXTEN}@fwd,70) exten => _8.,4,Macro(fastbusy) exten => _8.,5,Hangup *CLI>

Here is the setup: SIP/3044 -> SetCallerID(5551212) -> Call out PRI The CDR shows a src of 5551212. That is a lie! The src of that call was not 5551212, the source was 3044! The "translated source" of that call was 5551212. How can I get "real" source of this call and not some faky nonsense? The "reason" behind using the SetCallerID is because if I

I'm trying to migrate from MeetMe to ConfBridge: [conferences] exten=>_8[1-9],1,Answer() ;;exten=>_8[1-9],1,Meetme(${EXTEN},1Ms,1234) exten=>_8[1-9],2,ConfBridge(${EXTEN},1Ms) exten=>_8[1-9],n,Hangup And that works. Also changed the hints: ;;exten => 81,hint,MeetMe:81 exten => 81,hint,ConfBridge:81 ;;exten => 82,hint,MeetMe:82 exten => 82,hint,ConfBridge:82 ;;exten

Hi forum, I have been fighting days and days configuring FWD and asterisk with NO success I have the following scenario. My sister in Spain with FWD dialup client My question is if she can dial my FWD dialup number, which is registered in Asterisk and the call being forwarded to ring my IP Phone. Spain LAN FWD

I'm confused about something. It's the way Asterisk handles the A leg (ie the first party dialed) on an originate command via the Manager Interface. Lets say our originate commands looks like this: ACTION: Originate Async: yes Timeout: 60000 Exten: callback Channel: SIP/5551212 at provider Variable: destination=SIP/8675309 at provider Callerid: 5551212 Context: default ActionID: 849120

I was optimizing a 650MB using ferret (0.11.3) and I received the following error. I''ve seen some people have similar issues but I haven''t seen any resolutions. The contents of the index directory follow the error. Has anyone seen anything like this and found a resolution? Many thanks. /mnt/apps/search/releases/20070622175637/script/../config/../vendor/

Hi, I can't receive/send calls with Asterisk. Could someone please give me a few pointers on my configuration? Regards, Norman Zhang ; sip.conf [general] disallow=all allow=ulaw port=5060 bindaddr=0.0.0.0 externip=x.x.x.x localnet=192.168.22.0 mask=255.255.255.0 context=inbound-sip maxexpirey=180 defaultexpirey=160 tos=reliability srvlookup=yes register =>

Hello all. I'm having an odd problem getting * and sipgate to work together. From Sipgate support I have gotten this repsonse to my query: ===== Your Asterisk is registering incorrectly with our servers. It registers like this: sip:s@217.XXX.XXX.XXX:5076 The "s" should be your SIP ID. Anything else is rejected. I don't know where you can find this setting, but from our

I have two servers, each connected to the PTSN via PRI. When I call from site A (951-999-9999) to site B (555-1212) and the phone at site B is on the phone, I hear the normal ring tone for about 20 seconds, then the message "all circuits are busy now. please try your call again latter" followed by the congestion tone. Instead, I want this to busy ring and then hang up without any

FWD (Free World Dialup) allows any SIP call to US toll free numbers via * 18xxzzzyyyy at fwd.pulver.com This works WITHOUT the need to be registered at FWD so in my dialplan I have something like: exten => _8.,1,Dial(SIP/fwd.pulver.com/*${EXTEN:1},60,r) exten => _8.,2,Hangup And I just dial 8-1-8xxyyyzzzz and presto ... calls go through just fine 99% of the time. I'm wondering if