similar to: TDMoE questions

I was looking at the wiki on 'Asterisk as a voice/fax switch' And was wondering if the extension 'fax' is global to extensions.conf Or just to the context it is in? The reason I ask, is that my PRI might have 5 channels that will be scrictly Fax, and to be functional, I need multiple 'fax' extensions in my various Contexts. Hope that makes sense, Paul Seniuk

Hello, I'm looking for a similar feature... Dial a number via ZAP/g1 after the line gets answered wait 10 seconds send DTMF Regards, Marc -- Network Manager Marc Storck LuxAdmin.Org mstorck@luxadmin.org Internet Service Provider http://www.luxadmin.org 15, route d'Esch Phone: +352 2727 3030 L-4544 Belvaux Fax: +352

Hello, I've been using TDMoE accross 2 * boxes for months. It was working well, but * would crash when anyone would try to connect via h.323. So, I got the latest CVS release and compiled without h.323 support. After I made and installed the latest CVS the TDMoE channels stopped working. They have been working great (especially after we got echo cancel working them, thanks Mark) and the

We have been pretty much able to solve our echo problems, except for the primary mode in which we desire to operate our system. See system diagram at bottom. Prior to making adjustments to cancel echos (all echocancel=no): Call Type Result (Before) --------- --------------- CP <- LEC PRI * TDMoE * FXO -> AP

I've been experimenting with the zaptel TDMoE stuff and I've got it all working. Calls go from one asterisk box to the other, with no issues, except they don't bring the callerID along with them. I tried the e&m signalling from the wiki and I thought maybe that had something to do with it, so I just changed it to half fxsks and fxoks and that didn't help me any, I still

Just a Question. I would like to know if TDMoE follows specifiaciones of TDMoIP RAD protocol that says that there is a compression of 16/1 when you do TDMoIP. Manuel Marin Garcia TRANSTELCO S.A. DE C.V. Campos Eliseos 9050 B4 – Cd. Juárez, Chih. 32452 - México Oficina: +52 656 692 11 09 – Fax: +52 656 692 1112 - Celular: 915 727 6141 http://www.transtelco.com.mx

I am planning to configure * box A with PSTN interface to route faxes to * box B (running spandsp) over TDMoE. I am using 2xGb bonded NIC's for connection between servers. Was wondering - does anybody have experience with TDMoE over bonded interface - ie. does it work ok?. - does anybody have feedback using this scenario for fax? another question, perhaps someone knows what's the

Robert, > Is there a product to simulate a PRI trunk? (Robert > Goodyear) TDMoE emulates a T1. ;) Once the TDMoE link is up, Asterisk just sees 24-lines that appear to be a T1 instead of having to deal with all of the complexities of VoIP. This is useful, since probably 75% of the utility of VoIP is really just the fact that it can run over a network. It's also handy because it

When I was trying to run mutiple E1s over TDMoE, the zaptel would drivers complain about too little memory, whenever I added more than 31 channels. Requesting 62 channels in a dynamic span gave me ... span creation failed: Cannot allocate memory upon loading the zaptel drivers. How would you go about running, 8 or 16 say, E1s over TDMoE? Would you create multiple dynamic spans or just one large

If I have a system with 1 machine to handle incoming H.323 calls and then multiple machines to distribute them to T1 ports over TDMoE, where does the codec translation take place? Does it take place in the master system or does it take place in each of the slave TDMoE systems? Also, any idea how many concurrent G.729 calls a system like this would handle?

Juan, I dont see people here with "attitude" or any need to shut down this list as you suggested. Contrary to your experience, I find people to be quite helpful here. Steven's comment "Start here and then ask a real question" is definitely not arrogant IMHO. He is just trying to knock some etiquette on Luan. Besides, he did give him all the answer Luan was looking for.

I was trying to establish a TDMoE span of 4 channels between two Asterisk servers. Machine A has a T100P to our PBX. Machine B has no Zaptel hardware. With 4 channels (e&m signalling) the red alarm never clears, and eventually machine A panics. With 24 channels, the TDMoE span seems to work perfectly. Is this hardcoded somewhere? I don't really need a full 1.544 Mbps between my two

Hi all, I'm having some problems getting TDMoE setup for the 1st time. I have a TE405P installed in the main server with an ethernet cross-connection to the secondary machine. (Yes, I know about IAX2 but I want to use TDMoE to simulate using T1s.) I'm using -HEAD from yesterday. On the main machine /etc/zaptel.conf: loadzone = us defaultzone=us

I'm just experimenting with dynamic spans using TDMoE, which looks ideal for clustering Asterisk boxes with low latency (i.e. 1ms for TDMoE compared with 20ms for IAX). When using normal E1s and T1s, I've always used ISDN signalling: either EuroISDN or NI2. So naturally I tried that over the TDMoE. I've found that I get a lot of HDLC errors and the D-channel is up and down like a

I was trying to use TDMoE and I lasted with two problems. First of all I can't configure the dynamic span to use CAS signalling but documentation (by Mark) says that you can use any type of signalling (and this includes CAS I guess). My second problem is related that my Linux system crashes frequently due to ztdynamic and friends. I'm using a 2.4.26 version kernel and zaptel

Hi all, Information on this topic seems a little scarce, so I thought I'd try the list.... Apart from the the coolness factor can anyone explain to me in what situation one would use TDMoE rather than IAX for communication betwwen 2 Asterisk servers?

Hi All, Please bear my ignorance but what is TDMoE used for? Illustrations with practical applications, scenarios or set ups will be most appreciated. Thanks Luan

Hello, I want to create channel bank in this case: "channel bank" |-----------------------------------------| | FXS,FXO<----->TDMoE<--|---------------------------------->Asterisk |-----------------------------------------| How can it?

Has anyone every attempted to set up a mini PC to achieve much the same functionality as the fonebridge box? The sort of thing I'm imagining is a micro itx board & case in a completely solid state configuration (flash disk, maybe a psu fan but only if really required), with a TE210P (or equiv) card(s). The sole purpose of this would be to be a bridge between E1 lines and TDMoE. The

Hello all, I have two machines I'm connecting with TDMOE (dahdi dynamic spans) and I have a question about timing parameters. By my understanding one machine should be the source of the timing and the other a slave of that timing. So on machine A I have the following in system.conf: dynamic=eth,eth0/00:0C:29:55:89:7E,24,0 On machine B I have this is system.conf: