similar to: SpanDSP/RxFax anomalies...

I've seen people mention that they have fax reception working with Asterisk, spandsp, and app_rxfax. I'm using the latest Asterisk from CVS, SpanDSP 0.0.1k, and the latest app_rxfax.c (as mirrored by friendly list members recently), and libtiff 3.5.7. Asterisk is detecting the fax signal properly, and executing the fax extension in the dialplan. The fax part of the dialplan is pretty

Hi, I just sent this to Steve Underwood, but then found a bunch of posts on the mailing list about similar issues.. does anyone have the fix? I'm running asterisk CVS-HEAD-06/28/04-18:13:13, spandsp 0.0.1k, libtif 3.5.7 one thing i just noticed is that calls come in with format '72' which is G711A-law or LinearPCM.. it uses PCM for the call, i assume this is ok the results of RxFAX

Hey All, I am attempting to get the RXFax app working and having a hell of a time of it. I am hoping that some of you fine folks can help me out. I have installed Asterisk v1.2.14, SpanDSP v0.0.2pre26 and app_rxfax. All compiled and installed fine. When I attempt to call the extension I have created for receiving fax's then I get the following error once just as the rxfax

Hi, I have got my Asterisk server running with TDM400 card (2xFXO & 2xFXS). I originally had the system configured with a Panasonic fax machine on one of the extensions. Due to the high volume of fax spam, I figured it would be a much better idea to capture the faxes as TIF or PDF files to minimize wasted paper, etc. I have downloaded, compiled and installed spandsp and can see the rxfax

HI All. I'm using tiff-v.3.5.7 and spandsp-0.0.1k with latest * cvs on Slackware-10.0. Here is debug messages from * console. Please advise. Can receive fax Selected data signalling rate: V.29, 9600bps 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 0ms Get at 9600 Changed from phase 3 to 5 Fast carrier up Training failed (sequence failed) Fast

Scott's SpanDSP FAQ mentions that the senders' TSID (20 bytes sent by sending fax machine) is made available, but doesn't mention where or how. Is there a variable or something that's set? I didn't see it in http://www.voip-info.org/tiki-index.php?page=Asterisk+variables Thanks, Woody

>Does IAXmodem allows you to receive faxes with any extensions >(auto-detecting incoming faxes). You just let Asterisk do the fax detection for you, and when it hears CNG, send it to the fax extension, and your fax extension would just Dial() one of the IAXmodems (using IAX) >>DRi@b-w-computer.de wrote: >> sure in an small office you can use iaxmodem/hylafax to receive faxes

Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. I'm using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using

Hello, Anyone else experiencing problems with the latest spandsp (pre3) and last libtiff beta? I'm getting 8 bytes long file, with the TIFF header only during such connection: -- Accepting call from 'XXXXXXX' to 'YYYYYY' on channel 0/2, span 1 -- Executing SetVar("Zap/2-1", "FAXFILE=/tmp/foch.tif") in new stack -- Executing

Maybe I over-complicated my question with the mailfax part. If I leave the mailfax step out entirely, then there should be a .tif file, right? But there's not. No tif file gets created at all. Permissions on the fax folder are 777 at the moment. Thanks for the responses so far. /Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Has anyone found how to resolve this issue? I tried emailing Steve Underwood (with crash backtrace) but he hasn't

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, anyone else seen RX/TXFax crashing Asterisk on latest Asterisk SVN? I've now seen it on two machines I tried to set up - one it seems because the tiff file was malformed, but the other is doing: tiff -> tx fax -> zaptel -> pstn -> ddi -> zaptel -> rx fax -> tiff The above crashes every time. If no one else has

I'm using Slackware 11. I unistalled the package that provides libtiff 3.8..... and installed the most current 3.7.... for lib tiff. I downloaded asterisk 1.4 beta3 and the 1.4 beta2 addons and untared them. created a simlink: ln -s asterisk-1.4.0-beta3 asterisk I've compiled spandsp from as follows cd /usr/src wget

Hi, spandsp-0.0.2pre18 works fine for txfax with HT488(version-1.0.1.2), but rxfax doesn't work. After some FAX sounds, it hangup! Could someone tell me how to debug? The following is the * CLI> log to 192.168.0.161:43222 -- Executing NoOp("SIP/4881-bde9", "") in new stack -- Executing RxFAX("SIP/4881-bde9",

Hello All ~ Having problems sending and receiving faxes with SpanDSP. I am testing on a simple 2 analog POTS to 2x X100p set up, connecting one line to a Konica 720 fax machine to test, or with other remote fax machines. Voice calls are working pretty well now. Platform is P3/800MHz/256MB/FC1. * recognizes faxes, and passes calls to RxFax and TxFax OK, but 99.9% of the time no fax content is sent

Rxfax answers, makes handshake, and crashes once the page starts to send. It receives a .tif file of 8 bytes. Asterisk dumps core - gdb shows : #0 0x281fd86c in t4_rx_putbit () from /usr/local/lib/libspandsp.so.0 #1 0x281fea3c in fast_putbit () from /usr/local/lib/libspandsp.so.0 #2 0x28208324 in decode_baud () from /usr/local/lib/libspandsp.so.0 #3 0x2820893f in process_baud () from

Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many

Hi, I have installed the latest version of asterisk(1.4.0-beta3), and built app_rxfax/txfax. I'm using spandsp from here, http://www.soft-switch.org/downloads/snapshots/spandsp/spandsp-20061207.tar.gz Everything builds ok. I had to manually apply the patch from the site so configure would spot spandsp libraries. However, when I try dialing my virtual fax extension (either from a phone or

I followed the instructions at http://www.opencall.org/instructions.html and http://lists.digium.com/pipermail/asterisk-users/2003-October/025094.html I was able to compile spandsp (./configure ; make ; make install), "manually" patched asterisk apps/Makefile (/usr/src/asterisk/apps), as the supplied patch does not fit the actual CVS apps/Makefile After make clean ; make install, I

Sorry in advance if this is a FAQ... I've got a working Asterisk setup based on A@H 2.2. I have a TDM400 card with 2 FXS and 2 FXO ports; PSTN connections come in via the TDM card. I haven't been able to get inbound fax with spandsp and rxfax to work. Occasionally an all-text fax will come in, though it's usually badly corrupted, but in most cases, it would appear that the call is