similar to: Polycom SIP 1.3.1 & Reject Button

Hello, Has anyone on the list been able to successfully setup a Polycom Soundpoint 500 IP phone? I am getting failed registrations, and the Polycom documentation is not very precise. Their web interface isn't helping much either. Thanks in advance, Brent -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am getting ready to install Asterisk and I was looking into the Polycom IP600 phones. I spoke with Polycom sales to verify the multiple line appearance and they said it would work. More specifically, if lines 1-3 all contain the same SIP registration info, the Polycom will only send out 1 SIP registration to the server and then handle the calls ringing on multiple lines. I was wondering if

I am having a problem with Red Alarms on X100P cards. The most frustrating thing is I can not duplicate the alarms, therefore am not sure how to solve it. I have read after searching posts and the web that you can try different signaling methods which may help alleviate the problem. There is fxsks (Which I am currently using), fxsgs, and fxsls While reading the Digium site about these different

Hello, We have 15 Soundpoint IP 500 phones and recently call quality has deteriorated. On some calls there is a static-buzzing of sorts that occurs when users talk. It can be picked up on SIP-SIP calls and SIP-ZAPTEL (Channel BANK<<-T100P). It basically sounds really weird whenever someone talks, it sounds like a bee buzzing or something. Very hard to explain. Also, there will be echo

Hello, About every 2 or 3 days I notice in the messages log file: Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 2: Red Alarm Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 3: Red Alarm Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 4: Red Alarm Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 5: Red Alarm Dec 17 08:39:27 WARNING[1220]: Detected alarm on

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3097 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040712/2a1bda93/smime.bin

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Hello, After reading the lists and taking reccomendations from TC, I have finally given up on the echo can built into asterisk. I am sick of hearing complaints from users, so the money spent on a hardware echo can will be worth its weight in gold. I am curious however, about some setup and component requirements. It seems as if every telecom place I call, either never calls back or doesn't

Just out of curiosity, What version of CVS and Polycom SIP software are you running happily? Are you running SIP 2.3.0 yet? 2.2.0? 2.1.0? I tried upgrading the CVS yesterday, with a mixed mode of 2.2 and 2.1 with poor results. Transferring did not work as expected. Using the # key to do blind transfers after a call was on hold did not work. Just curious. Thanks, - Brent

We have been experiencing static noise on one of our phone lines connected to our Adtran Total Access 750 which is then connected to a T100P card. I was convinced that, after rain storms, the static would get worse, it was surely a problem of Verizon's. Verizon sent a field rep out today and he told our secretary (I was busy) that there was a hard ground on the Ring portion of the line.

Hi, I'm looking for a multi-line sip/ip phone that can answer multiple incoming paths. IE a secretary sits at a front desk and can answer multiple incoming lines/DID's. Is there something like this? Thanks, Brent -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041202/5b685d69/attachment.htm

Have a strange problem... When a C7960 calls the Polycom ip600, the ip600's first line button blinks, the ip600 display shows the proper callerid, but the phone does not ring at all. If I call the same ip600 from a bt102, the ip600 rings properly. If I call the same ip600 from another C7960, the ip600 rings properly. All phones and asterisk are on the same lan within a few feet. The

Check with your telco. We had the same problem on 1 of our PRI's, every day at 5:00 sharp, red alarm, with all calls cut off for 30 seconds exactly. Turns out the equipment at the CO was going into a test loop at that time because of a forgotten setting by a tech. Man, what a finger pointing exercise that was. -----Original Message----- From: Matthew Boehm [mailto:mboehm@cytelcom.com] Sent:

Hello all, Has anyone used the SIP version of this phone with Asterisk? I see Polycom has a H.323 and MGCP version also, does anyone know if you flash the phone to swith protocols? Thanks in advance for the info. Ed -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031029/a9377305/attachment.htm

I'm having a problem with the callerID that the polycom IP600 phones are displaying. I would like to modify the CIDName and leave CIDNumber as exactly what the phone call came in as(provided they aren't hiding callerID). Most of the calls will be going to the queue, but a few will go directly to the SIP phones. I've done a various combinations of using SetCallerID(),

Hi, I'm testing a Polycom IP600. With firmware version 1.1 the phone reboots at any time. With firmware version 1.2, the first reboot was an endless reboot. Then I moved the phone to another lan port, then it worked fine. Then I installed again in the initial lan port and the phone works well. However after some time of inactivity (1 hour?), the IP600 stops to send and receive calls.

I just set up a Polycom 500 on *. Every few calls I make, the call connects and the receiving party can hear me (thru Broadvoice), but I still get ringing on my end, as if they never picked up. * logs look just fine. Does any one have any suggestions? Thanks. ________________________________ Adam S. Robins Executive Vice President & CIO PHARMACENTRA, LLP 5901B Peachtree Dunwoody

Hi all, I've just updated to current CVS, and have 2 polycom IP phones, one is a IP600 and the other is a IP300. The IP600 shows the status of the IP300 and a ZAP line quite nicely, but the IP300 won't show the status of the IP600.... Is there any additional debug apart from "show hints" to see why this might not be working ?? -= Registered Asterisk Dial Plan Hints =-

Hello, I'm looking for a similar feature... Dial a number via ZAP/g1 after the line gets answered wait 10 seconds send DTMF Regards, Marc -- Network Manager Marc Storck LuxAdmin.Org mstorck@luxadmin.org Internet Service Provider http://www.luxadmin.org 15, route d'Esch Phone: +352 2727 3030 L-4544 Belvaux Fax: +352

Hello, I am looking at the Polycom phones. The ip600 has a very nice screen, is that the only real advantage over the ip500 and ip300.. Is it worth the extra dollars? Kind regards Michael Felder IT Medic Australia Pty. Ltd. P: 03 9557 2213 F: 03 9557 2214 M: 0419 568 217 E: Michael@ITMedic.com.au <blocked::mailto:Michael@ITMedic.com.au> http://www.ITMedic.com.au