similar to: asterisk console from xinetd?

Good day, Just a quick question- could someone please confirm that this is the correct xinetd configuration (or not) for hpa-tftp? We've noticed that, when under moderate load hpa-tftpd resides in memory, even after there are no connections or even if xinetd is shut down. Under light load the server goes away after each connection, as desired. Thanks in advance! service tftp {

Hey folks, When I run rsyncd from xinetd and try to rsync I will get permission denied error: rsync: chdir /home/test failed : Permission denied (13) If I shutdown xinetd and start standalone daemon ( rsync --daemon --config /etc/rsyncd.conf) everything works as expected. This is my xinetd config for rsync: service rsync { disable = no socket_type = stream wait

In article <202005281646.34790.gary.stainburn at ringways.co.uk>, Gary Stainburn <gary.stainburn at ringways.co.uk> wrote: > Hi all, > > I can't believe that I can't find the answer to this one. I have a perl script which is called by xinetd. > > I want that perl script to be able to detect the remote IP address of the caller. > > I presumed that it

Hitting a big mystery here. I've configured samba properly but I would like to run swat. The /etc/xinetd.d/swat file contains: service swat { disable = no port = 901 socket_type = stream wait = no only_from = 127.0.0.1 user = root server = /usr/sbin/swat log_on_failure +=

Hello Everyone, I am having trouble with booting a soekris 4826 board.after setting up my tftp,dhcp and web servers ,I log into the board using minicom and type boot f0,which doesn't quite work out. > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082)

Hello, I am trying to monitor a host in the Amazon EC2 cloud. Yet when I try to check NRPE from the monitoring host I am getting an SSL handshake error: [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H ops.jokefire.com CHECK_NRPE: Error - Could not complete SSL handshake. And if I telnet into the host on port 5666 to see if the FW port is open, the connection closes right away:

hello, i'm having a wierd problem with 0.31 tftpd-hpa. i'm using xinetd, with this config: service tftp { disable = no socket_type = dgram wait = yes user = root log_on_failure += USERID bind = 10.13.0.254 server = /usr/sbin/in.tftpd

I have 2 servers I'm keeping synch'ed via rsync intel rh9 boxes with 2.4.20 kernel with xfs (1.3.0), acl, quota... and ootb rsync 2.5.5 rpm it works fine since a while recently I created a directory with restricted access, and I get "permission denied" error messages. this directory named RESTRICTED belongs to user "user1" group "group1" and has drwxrwx---

Hello, I would like to have the following line (among others) in my /etc/xinetd.d/rsync file : server_args = --daemon --address=<ipaddress_eth0> --log-file=/var/log/rsyncd.log To this end, i am using the camptocamp rsyncd module available from git. Everything works except this line. I thought it was, perhaps, a questions of spaces (this has been discussed on the list before),

Hi Eric, Thanks for your reply. I do have nrpe running under xinetd on the host I'm trying to monitor. And running the nrpe checl locally: [root at ops:~] #/usr/local/nagios/libexec/check_nrpe -H localhost NRPE v2.15 [root at ops:~] #grep only_from /etc/xinetd.d/nrpe only_from = 127.0.0.1 216.120.248.126 And I do have port 5666 open on the security group for this host.

Hi everyone, In the last few days I've spended hours and hours on the web surching for a solution to my problems. Eventhough it looked like there where several other people having the same problem I couldn't find a way to solve it. Therefore I'm hoping that one of you could help me with the following problem. I've installed Samba 3.0.14a on RedHat 9.0. Samba is working perfectly.

Hi Does the deamon run under xinetd? Then you have to configure the only_from in */etc/**xinetd.d**/**nrpe* to. Regards Eric Am 01.05.2015 06:46 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > Hello, > > I am trying to monitor a host in the Amazon EC2 cloud. > > Yet when I try to check NRPE from the monitoring host I am getting an SSL > handshake error:

hi... i've got an "access denied" issue with rsh on one of my boxes (and before we start, no "use ssh" comments.. rsh is what i'm dealing with for now!!) i've got a few boxes in my network, and i can successfully rsh into them with no issue. however, on one box, i can't access it using rsh, and i'm running out of things to try... kind of curious. i can

Hi, I have two identical servers running Mandrake 10.0 + many bugfixes. I installed the plain rsync 2.6.3 (and after that the last cvs checkout, but with identical results) and configured rsync as xinetd daemon on one of the two, rsync as client on the other. This is the result: [root@server rsync-2.4.4]# rsync -avz server::sitis/mydir/ receiving file list ... overflow: flags=0xb6ee l1=21

Hello All Samba-list Members, I have installed a Samba 2.2.7, the samba-latest.tar.gz, as a PDC on a Redhat8.0 GNU/Linux server. ( Of course, I first uninstalled the original samba that came with the Redhat installation CDs by rpm -e samba*.) The installation was successful. Then I modified /etc/services and /etc/xinetd.d/swat as suggested in the installation document uncompressed from

> This is strange... > Do you have SSL aktive on both systems? Run nrpr localy without parameters > (this should return some nrpe stats) and check ldd for libssl. I don't seem to have that command. [root at monitor1:~] #find / -name "*nrpr" 2> /dev/null [root at monitor1:~] # And that's on either system. And if I do an ldd on both, this is what I can tell:

Ok, I should be able to start swat with xinetd, but I can't seem to get anything to start. 1. How do I tell if swat is running (other than trying to browse to aaa.bbb.ccc.ddd:901) 2. Can someone give me an idea of what and where I need commands for xinetd. Server is RH7.2, Samba 2.2.3a, following file "swat" is in /etc/xinetd.d/ ## /etc/xinetd.d/swat service swat { port

This is strange... Do you have SSL aktive on both systems? Run nrpr localy without parameters (this should return some nrpe stats) and check ldd for libssl. Am 01.05.2015 07:32 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > Hi Eric, > > Thanks for your reply. I do have nrpe running under xinetd on the host I'm > trying to monitor. > > And running the

Hello, I've succefuly installed samba 2.2.2 on my Linux box. I can share between Linux and MS boxes, but I want to start samba from xinetd. In /etc/xinetd.d/ I have this: #/etc/xinetd.d/netbios-ns service netbios-ns { disable = no socket_type = dgram protocol = udp port = 137 user = root wait

Hello, I am not able to access SWAT from any other host besides the one running the SWAT daemon. No firewall blocking access on either side. # netstat -lnt | grep 901 tcp 0 0 0.0.0.0:901 0.0.0.0:* LISTEN works fine connecting from localhost using: lynx localhost:901 Unavailable using public IP on a remote host.. i.e. going into Firefox and