similar to: Maximum tollerable lag/jitter for IAX2 w/o jitterbuffer enabled?

Unfortunatly no on both counts. The arrangement right now has: PSTN Trunks & Stations <-> Nortel Norstar#1 <-CT1-> Asterisk#1 <-IAX2-> Asterisk#2 <-CT1-> Nortel Nortstar#2 <-> Stations The Asterisk boxes provide Voicemail to their sites Norstars and intersite calls over IAX. Local Voicemail works flawlessly at each site but there have been reports of PSTN calls

> -----Original Message----- > From: Chris Shaw [mailto:chriss@watertech.com] > Sent: September 7, 2004 4:40 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Maximum tollerable lag/jitter for IAX2 > w/ojitterbuffer enabled? > {clip} > > If you can reproduce it, this smells like a bug... IAX runs over TCP and TCP >

I have some stuck channels that I think I'm going to have to bounce Asterisk to get rid of, but am curious to know what they are and how they've managed to accumulate. The show up with a channel identifier of '(None)' as in the output below, and do not show up in the soft hangup list, and so can't be cleared by that method. Here is the output from iax2 show channels:

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default] exten=>_.,1,Dial(IAX2/${EXTEN})

Consider this dialplan fragment, where the call is being dialed into [macro-process-routing] over an iax2 channel from another (same build) Asterisk server: [macro-process-routing] ; This is the entrypoint of the debug call but is also refered to by Macro(process-routing) elsewhere in the dialplan ; XXX-NNN-6800 exten => _6800,1,Macro(6800-interceptor) ; This is matched when 8 is

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default]

Dear Sanjay, Sorry sanjay i miss to explain completely. My PC2PC mean is Dialer2Dialer i want to allow call between Dialer with out any registry and authentication through IAX. so i need to setup Asterisk accept calls from any user and users can call to each other without any password and registration. please help how can i configure Asterisk using IAX in this regards. thanks, Asif Message: 9

hallo all, i would like to know, as i would suspect, nativ bridiging should work also, if only one iax party is behind an nat router and the other has a public ip. when i connect to iax clients, which have both pubic ip's nativ bridging is working. if one of the clients is behind an nat, the iax2 channels always get routed through the asterisk server (latest stable version from cvs) ?? i

Hi all, Some time ago I posted an issue regarding the hangup of active calls from the CLI and someone told me that "soft hangup" should work. Well, in fact it does work, but only if the channel is known, i.e. it doesn't work for zombie channels. For example, I have this scenario (CLI output of command "iax2 show channels") IP-AM-PBX*CLI> iax2 show channels Channel

Hello all, I updated from CVS 3 days ago and now my IAX2 gateway is dropping calls without warning. It happens right in the middle of a conversation with no pattern. I never had this Problem before and am usually talking 2-3 hours a day. Is their a bug? Should I rollback? Cheers, Paul Seniuk -------------- next part -------------- A non-text attachment was scrubbed... Name: Paul

Or perhaps how to configure and refer to two parallel IAX trunks with different codecs? I have a situation where I'm using G.729A as my IAX trunking codec. Now I need to push some short duration, low bitrate modem traffic over the link (a credit card terminal). Obviously the modem audio isn't going to survive the G.729 codec process intact, so for the times the device is used I'd like

Couldn't see the forrest for all the fascinating tree-like applications that are out there: For future reference, see: http://www.voip-info.org/wiki-Asterisk+call+parking :-) -----Original Message----- From: Kris Boutilier [mailto:Kris.Boutilier@scrd.bc.ca] Sent: August 11, 2004 1:10 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Inband announcement of parking slot from

> -----Original Message----- > From: Robert Goodyear [mailto:me@jrob.net] > Sent: Tuesday, March 22, 2005 1:21 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] Is there a way to get inserted into an LEC's > CLIDB? > > > Does anyone know if there's a service out there to -- for a fee -- > inject our DID into the

Hello all, It used to work on calling my GTalk ID from another GTalk user. But now that I tried calling it again, the caller hears only a ringtone and disconnected after a few rings. The messages on my Asterisk-1.4.21.2 are the following: [Jan 29 10:37:51] ERROR[1303]: rtp.c:1945 ast_rtp_new_with_bindaddr: Unexpected bind error: Cannot assign requested address [Jan 29 10:37:51] WARNING[1303]:

Hello folks. I've got a strange issue. When I modprobe TE220 I do not see mesages like Launching card: 0 <..> Setting up global serial parameters. You can see how I loaded and unloaded the card for several times - http://asteriskpbx.ru/pastebin/11 lspci can detect the card: 03:08.0 Communication controller: Digium, Inc. Device 0220 (rev 02) dahdi_hardware also: astpbx ~ # dahdi_hardware

I am trying to work out IAX <--> IAX communications with my * box. I have a registration with iaxtel and I thought I would start there for my learning. I am able to call the number for Digium's support line (700-428-6000), but the sound is horribly chopping. Some reading revealed the jitterbuffer settings, so I enabled them in iax.conf. I have the following now: ; Inter-Asterisk

Inquiring (management) minds want to know. I'm assuming it's because 'it's funny how simple it really is to write a really decent voicemail system'? Kris Boutilier Information Systems Coordinator Sunshine Coast Regional District

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Gary Reuter > Sent: Thursday, August 11, 2005 12:59 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] PRI dropped calls w/ asterisk dropped > betweenpstn & norstar > > > I poured over my logs most of

Hello, After solving the other "low hanging fruit" audio issues in our Asterisk PBX, we are left with occasional cases of severe echo which we have not found a solution for yet. Our system: - Asterisk 1.2.0-beta1 - TE110P on a PRI - TDM04 and TDM40, but these are unrelated to current echo issues - Fedora core 3 - Echo canceller KB1 Most calls have minimal, acceptable echo levels. But

I've got a need to do something like the following: [foo-context] exten => _.,1,SetCIDNum(123) exten => _.,2,SetCIDName(XYZ) include => local include => tollfree But of course, this example won't work. The goal here is this: if a call ends up being handled by the "local" or "tollfree" contexts, I want those SetCID*** commands executed. Otherwise, I