similar to: Tormenta & Asterisk

Hi there, my * has no Zaptel or Tormenta hardware at all, also no ztdummy. However dmesg is full of Zapata Telephony Interface Registered on major 196 No ISA tormenta card found at d0000 Zapata Telephony Interface Unloaded and /var/log/messages shows tons of this: Nov 25 21:28:28 localhost kernel: Zapata Telephony Interface Registered on major 196 Nov 25 21:28:28 localhost kernel: No ISA

Hello all After install the Asterisk, setup the configuration file in the sip.conf and extensions.conf and type "asterisk" with start program. I don't have line card yet. But I found following error in the /var/log/messages. localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: init_module: Input/output error localhost insmod: /lib/modules/2.4.18-5/misc/torisa.o: insmod

(I'm producing a writeup on all the things one run into building an * box. Which after a couple of boxes is showing up aplenty.) So this uses the working h/w and config's from another box. All I do is build in a new computer. Loading the modules I got: __________________________________________________ Zaptel Configuration ====================== Channel map: Channel 01: FXS

Hi all, New user to asterisk having just got it compiled and installed. Running with no digium hardware (yet) and no soundcard in asterisk box. Problem is using the sample configs with a sip phone added as follows [2203] type=friend username=2203 secret=2203 host=dynamic defaultip=192.168.0.2 dtmfmode=inband canreinvite=yes the console on * when running with -vvvvc says :- (whenb trying to

Looking at my log file I found the following error: May 2 12:00:45 debian kernel: Zapata Telephony Interface Registered on major 196 May 2 12:00:45 debian kernel: No ISA tormenta card found at d0000 May 2 12:00:45 debian kernel: Zapata Telephony Interface Unloaded May 2 12:00:45 debian insmod: /lib/modules/2.4.20-8smp/misc/torisa.o: init_module: Input/output error May 2 12:00:45 debian

I have an old zapata tormenta 2 quad port pci card. I'd like to get it working and play with it but was curious to see if that was possible. Does anyone know if it will work for 2.6 kernels, or where I can find decent drivers? I tried getting the tor driver from http://www.zapatatelephony.org/linux-zapata-current/ installed, but didn't get very far. Any input is appreciated.

Hello,every one! I want to fabric a piece of Tormenta ISA E1 card for study. But the from http://www.zapatatelephony.org is all about Tormenta ISA T1 card. I want to know if they are using the same chips or something different bettween them. Thanks. john

Good day everyone, A Solution now exists for those of you still looking for the first model of Quad T1/E1 Interface Cards - the T400P and E400P. The T400P and E400P were manufactured by Digium until a few months ago, and were designed and released under the GNU Public License as the Tormenta II by Zapata Telephony. Varion, Inc. is now in full production manufacturing these boards. With the

Hi everybody, I need to know about sound quailty issues from those who have experience with Tormenta2 PRI Interface. Also how to make it work with new versions of Asterisk and Zaptel. And also suggestion if it is a good idea to switch to some newer card from Sangoma or Digium, or Tormenta should work fine. I have sound breaking many times a day over the trunks. Server is AMD Athlon 2.4 GHz with

Hi All, I'm having a bit of a time getting my Tormenta 2 card to actually be seen by the system. Whenever I modprobe, the kernel spits out the following (in addition to the "insmod tor2 failed" messages): Invalid Xilinx 8 bit Base resource Registered Tormenta2 PCI Of course, the module says that its registered a Tormenta2 card, but it unloads the driver and frees related

Hi everyone (Mark, Jim). I am new to the list but thanks to both Mark and Jim, I have being using "asterisk" since summer 2001. I am just updating my version that was a year old. Yes, I know, I got busy with other things like paying bills so I don't have to sleep with the dog anymore. Anyway, one of the frustrations I have been dealing with (keep in mind that my version of

Hi, Some days ago I spent about US$700,00 in a Tormenta III board in www.govarion.com. I used credit card. I didn't receive any answer for my emails and there is no telephone number to contact them.. Now, I'd like to cancel this order, because I couldn?t wait so long, and my credit card was billed. Is www.govarion.com a fraud ???? Does anybody know something about them ?? Thanks.

Hello- As part of the asterisk build/installation instructions it mentions that the zaptel drivers should be built and configured first. My question is whether they are required at all, in the case of a system with no hardware cards at all (as is the situation in my case). With them loaded I continually get the following message on my console (server not asterisk): Zapata Telephony Interface

Has any one used it?

Hello, I had two quad-E1 Tormenta2 cards in my system and yesterday i had to replace the CPU. I noticed the rotary switch on each card that sets the card number or ID... Both switches were set up on 0 and everything worked fine. Should i set one card to 0 and the other one to 1, or... "if it works, don't fix it!" ? I had some nightmares with IDs on Dialogic hardware with Bayonne

I have the following error, I guess related to astersk, in my log file : Apr 26 10:28:52 debian kernel: Zapata Telephony Interface Registered on major 196 Apr 26 10:28:52 debian kernel: No ISA tormenta card found at d0000 Apr 26 10:28:52 debian kernel: Zapata Telephony Interface Unloaded Apr 26 10:28:52 debian insmod: /lib/modules/2.4.20-8smp/misc/torisa.o: init_module: Input/output error Apr

Hello guys! I hope you bare with yet another newbie on the list! :-) I am trying to setup an asterisk installation in between a Siemens HiPath 3800 and my local carrier (Telefonica/Brazil). Both running R2. ISDN is not an option on the carrier. :-( I could apparently setup both E1s just fine according to zttool (both OK with no alarms) but, and this is where it starts to get

Hello, I'm about to install asterisk as the PBX at a location that my company has just moved into and I would like to get some comments and advice on the installation. I am new to * and don't want to make any big mistakes so I would love to hear whatever anyone has to say. Here is what I have so far Server: * 2.8Ghz P4 - 1G ram * T400P Tormenta II (is this as good as the

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm