similar to: spouse-friendly spa-3000 pstn interface

Arrggghh. Tearing my hair out here. I'm trying to set up the spa3000 in the UK for my home, and want * to control the dial plan I've googled to no avail. I've read the manual to no avail. Can someone, please let me know what the parameters is the spa and * are to a) receive a call from the pstn b) make a call to the pstn from the phone attached I can make sip to sip calls (i.e. I

I am still haveing problems (echo) with my X100P but I'm thinking it has more to do with the server it is in which is not a negotiable item at this time. My question then is to the use of SPA3000's as a replacement from the FXO standpoint. 1. Can you setup the FXO port to recognize distinctinve ring and call a different context like you can do with Zap channels? Being able to call a

I'm looking to give the SPA-3000 a whirl as I'm having too much difficulty with the irq sharing thing inside the box. I'm reading the book but without having one in-hand to play with it appears a little obtuse at this time. Before I drop down my money can someone with some hands-on with one of these confirm if the SPA-3000 can: a) detect inbound distinctive ring (this looks to me like

Since the 3000 has been out for a little while, has anyone done a review of the product? (couldn't find anything on google for wiki). Can the fxo and fxs ports be used as two independent channels? Is it really read for prime time? Etc. Rich

Hello list, hope someone can help me - I'm going crazy using the FXO port a SPA3012. I would like the SPA 3012 to act as a simple FXO port to an Asterisk, that is, once it detects a call, it should simply send it over to the local Asterisk server. No intelligent routing, PIN, anything else.... I configured it like this: PSTN-To-VoIP Gateway Setup PSTN-To-VoIP Gateway Enable: yes PSTN

I am considering using Sipura-3000s as FXO devices for my * system. Has anyone tried them in that configuration? They interest me because they need no PCI slots and therefore no drivers. I would much prefer not to have any special kernel requirements for my system. /carmi

Hi Folks, I am running a SPA-3000 behind a legacy PABX on an analog line. I have been able to set up a dial plan that sends outgoing calls out to the appropriate VSP depending on prefix, and that part and the incoming call handling works fine. I am now trying to implement call pickup (dial 6*) or manual call forwarding (flash, dial extension). On the first of these I have worked out how to get

Have you thought about making them agents, they would both be reachable by dialing there agent number then, and I know only one agent can be logged in at once. Just a thought. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk-users-request@lists.digium.com Sent: Saturday, April 22, 2006 8:26 PM To:

Hello. Has anyone run into problems accessing voicemail with the Sipura SPA-2002's? Our SPA-2000's work fine (registers fine, able to make and receive calls properly & also able to access voicemail). We've configured the 2002's exactly the same way. However, with the SPA-2002 we're unable to access the voicemail system (though it does register fine and is able to

Hi, I have a question today regarding how the various form elements in _form.rhtml are named. I understand that for a database table "persons" with a column headed by "name", then in _form.rhtml it will probably be like: <p><label for="person_name">Name><br/> <%= text_field ''person'', ''name''

Hello r helpers! Below is the whole coding for my programme. Before proceed more further, let me explain for you. First of all, I need to compute trimmed mean. Till that step is ok. Then I need to compute ssdw which is sum of square deviation. If I do equal trimming at both tail of distribution that I chose, I will use the first ssd formulae which is "a". But if I am doing unequal

Hi, all I finally got myself one of those SIPURA boxes. It is labeled as Linksys, but this is actually a SP3000 box. Anyway, unit has lots of configuration parameters. Not all are obvious. At the moment it registers against my *, but all the calls I do from analog phone connected to it, go to VoIP channel. As this part is still in testing, I want all the outgoing calls got to PSTN by default

My SPA-3000 finally arrived and I'm trying to get the FXO port on it to work as if it was a X100P card as far as Asterisk is concerned. I have Asterisk dialing out over the SPA-3000 FXO port no problem. The issue I'm having problems with is having the SPA-3000 automatically forward all incoming PSTN calls to the Asterisk "mainmenu" context (or ext I guess). Currently the

Greetings, What is the recommended settings for using SPA-3000's FXO port for dialing out to PSTN in regard of the DTMF? The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports registered to the Asterisk box with unique username/passwords. The inbound PSTN DTMF works excellently, e.g. people calling from PSTN into the * box are able to pick IVR items with DTMF reliably. The

I'm trying to link up Cisco MGCP-enabled router (residential gateway) with Asterisk, and it looks like some sort of protocol mismatch, could it be MGCP 0.1 vs 1.0? Look at this (x.x.x.99 is the router, x.x.x.98 is Asterisk): MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427Verb:

I heard Sipura had really awesome documentation on the SPA-2000 and SPA-3000, but you have to email them for it. When I did, they said I had to get it from a reseller. It's been a while since I bought my units, I don't even remember where or who they were bought from. Can somebody email me the documentation for these devices? I'm quite interested in knowing what every one of their 200+

I am located in the UK, and I am using Sipura spa-2000 adapters to connect analog phones to a voip network. The network connects to the PSTN as well via the Sipura spa-3000 adapter. I would like to provide surge protection for the spa-2000 and the spa-3000 adapters. 1. For spa-2000, fxs port: What is the maximum tip-to-ring voltage before damage to the the adapter occurs? 2. For spa-2000,

Hello everybody, I have a very strange issue with a Linksys SPA-3000 (1 fxo + 1 fxs) used as PSTN gateway to asterisk in a small office. Everything works just fine, except that sometimes, and it seems that only for long incoming calls, the IVR menu appears on the middle of the call(like a three way call, call goes on with prompts playing over the parties). Dialing an extension at the prompt at

Hello All! I am in the process of assembling an asterisk-based phone system for my office - using SPA-3000s to connect the network to the PSTN. I am wondering if anybody else can get (or has already seen) the same behaviour out of their 3000. The short version: Send multiple Calls to the SPA's FXO port at the same time it is re-registering with Asterisk. SPA HTTP Configuration:

Hi All, I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN Line" tab) so Asterisk answers the call rather than the SPA-3000. It is all working perfectly except I can't get the SPA-3000 to pass caller ID to Asterisk. It passes "Display Name", "User ID" and any "PSTN