similar to: Re: Re:New to *

so i have been running v1-0 on all of my test boxes for about a month now testing iax/sip/res_xxx. I decided to put it into production so I updated a box that was running 0.9.? that had been working perfectly for months and low and behold the inbound line from telco now intermittantly doesn't clear and none of the other channels can dial out on that line. I have tested the line in this

-----Original Message----- My question concern outgoing calls. How can I configure my extensions.conf to get a PSTN line on my TDM04B card in the following order : first trying on the channel 4 then if 4 is busy then switch to 3 if 3 is busy then switch to 2 and if 2 is busy then say there's no more line available. I don't want to dial on the first channel as it's my main number

-----Original Message----- <snip> Is this possible with asterisk? Anyone have a sample dialplan? -other than the problem outlined below I would try something like S,1,wait(20) S,2,voicemail(uwhatever) S,3,hangup That should ignore the call for 20 seconds and then leave a message in the unavailable greeting for 'whatever' then hangup That leaves another problem -

So I have a route with [1-9][0-9][0-9][1-9][0-9]* as a base route that should match NXXNX. Right? I built another route 01144[0-9]* that I thought would match 01144X. and send the call to the UK but the script is matching 01144207108???? With the first route. Can someone smarter than me help with some samples? Please? If I can get one for 1NXXN. and 01144. I should be able to figure the rest

Quoting asterisk-users-request@lists.digium.com: > Date: Mon, 14 Mar 2005 22:23:54 -0700 (MST) > From: Greg Hill <gregh-asterisk@hillnet.us> > Subject: Re: [Asterisk-Users] How NuFone.Net's customer service > works. > To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users@lists.digium.com> > Message-ID: >

hello all- has anyone had any problems with the handsets on BT100's. Just picked one up for my lab and the speakerphone works great but I am only getting one way audio (incoming) from the handset. Since the speakerphone works fine, I can't think of any config. reasons why the handset wouldn't other than a faulty handset. Any thoughts or experiences? Jason Kawakami Technical

I have 4 7960's that I am trying to get working but 2 of them will not update to the SIP image on my tftp server like the first ones did. i keep getting the error on the phone 'Defaulting CM to TFTP server' like it isn't seeing the *.bin on the server. are you supposed to have on of those for each phone? would be like cisco et al to do something like that. TIA Jason Kawakami

----- Original Message ----- > Message: 3 > Date: Thu, 16 Sep 2004 07:57:15 -0400 (EDT) > From: David Troy <dave@popvox.com> > Subject: Re: [Asterisk-Users] No Caller Name sent from Asterisk over > National or DMS100 PRI to a Norstar MICS? > snip> > > I have a PRI link up and running between Asterisk and a Nortel Norstar MICS > > v4.1 . I'm having a

Back in the office post-astricon. 1.0.0 running in the lab. YIIIIIIIHAAAAAAAAAA! THIS GUY!!!! rocks. Thanks to Mark for *, Steve and Olle for the conference and to ALL community members. Everyone using * is contributing in one way or another. See y'all next year Jason Kawakami www.optellabs.com

----- Original Message ----- <snip> > I've downloaded the * software and the zaptel drivers. look in the zaptel source directory and you will see a file called README26 (i think, or something like that) i am not a linux expert but my linux 'experienced' partner told me something about the 2.6 kernel... > > And now, to be quite honest, I haven't got much of a clue

Hello all- Playing around with res_odbc (thanks bkw) and have successfully gotten sip.conf to run but am having difficulty with voicemail.conf and extensions.conf. I used the load_res_config.pl script for each one and all of the data seems to be in the DB but * doesn't seem to see anything after a reload even though it is acknowledging a load of x.conf (where x is extensions/voicemail)

-----Original Message----- > -this is very true, however, the current version of the Axxess software > (9.0) supports SIP trunking natively on the IPRC. I just got my Axxess > upgraded and am salivating to get * connected to it. Hmm, so 9.0 is out and it supports SIP natively. How did you plan to integrate the 2? -The Axxess will see the * as it would see an IP service provider.

Sorry everyone, I know this has been hashed over a bunch of times but I can't find anything that pertains to specific cracking and popping on the FXO modules of a TDM04. This happens on inbound or outbound calls. This is the first install I have done with a TDM card for FXO modules so please, be kind if I am missing something really simple. Damn I wish everyone wanted t-1's or

who can tell me how to do TDM over enthernet ? pc a connect pc b only use TDM card? thank you John. -----????----- ???: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]?? asterisk-users-request@lists.digium.com ????: 2004?12?23? 11:47 ???: asterisk-users@lists.digium.com ??: Asterisk-Users Digest, Vol 5, Issue 336 Send Asterisk-Users mailing list

Thanks for taking a look greg and hank. This seems to be getting bettre everyday..help please My sjphone is running on the same box as asterisk...i believe then the red hat firewall should not be a problem. Whenever i dial from CLI i get ######### Executing Goto("OSS/dsp", "default|s|1") in new stack -- Goto (default,s,1) -- Executing Wait("OSS/dsp",

I'm thinking about using asterisk as an IVR system with an existing avaya index system. I've got 2x PRI 30 lines coming in to the Index, and I have 4 spare PRI cards in the Index. I was thinking about using a QUAD PRI card from Digium and having the calls come into the Index then transfer to Asterisk for IVR then back to the Index. That way if we get 60 inbound calls we'd in

----- Original Message ----- > Subject: Re: [Asterisk-Users] Analog Phones with Status Light Indicators > From: Adam Goryachev <mailinglists@websitemanagers.com.au> > To: asterisk-users@lists.digium.com > Organization: Website Managers > Date: Thu, 12 Aug 2004 14:53:02 +1000 > Reply-To: asterisk-users@lists.digium.com > > On Wed, 2004-08-11 at 20:42, Steven

Hi, does anyone have the setup for go2call ? I have digium boards and quicknet linejacks and phonejacks. The cards work fine in asterisk without the g729 or g723.1 for the phonejack. I will like to do SIP origination using the codec in the phonejack and linejack g729 or g723 and send the calls to go2call. Anyone has the setup for this ? Or similar setup to a SIP provider using g729 or g723

Hi I am getting the following errors when i try to use yum to install the net-snmp paclages. [root at sc1 yum.repos.d]# yum install net-snmp Loaded plugins: fastestmirror Determining fastest mirrors Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 229,

After our department went to using *, I've had several inquiries about doing VoIP for my entire organization (Small county). We have ~10 locations with various links in between (Mostly p2p T1s, some Frame (1.544mbps commit), some ISDN, some VPN over 768kbit internet) Right now we're using several NEC Electra Elite systems, and 2 Nortel Meridian systems. In one of the main locations we have