similar to: asterisk config and root

Hi, can someone sched a light what exactly mean the read write permissions in manager.conf? [public] secret = private deny=0.0.0.0/0.0.0.0 permit=10.0.0.0/255.255.0.0 read = system,call,log,verbose,command,agent,user write = system,call,log,verbose,command,agent,user Lets say I want some users to use dial through manager interface. But don't want to allow them to run asterisk commands?

Hi, I have problems with SIP via TLS. Asterisk works as a client. The TCP connection is established, followed by a client hello from Asterisk to the server. The server sends Server Hello, Certificate, Server Key Exchange and Server Hello Done. Than Asterisk sends back a Alert (Level: Fatal, Description Handshake Failure). The following line appears in the log: ast_iostream_start_tls: Problem

Hello Although not stictly a asterisk issue, any help would be apreciated. Firstly a few notes on the snom 360, which I have had on a test bed for the last week. Its a great phone, with a good user interface, both physically and its web based one. At its lastest firmware it does have a few quirks, with regards to the way it handles usernames and passwords on the physical interface. These have

Hi list, Does chan_capi work with kernel 2.6? The Eicon Diva server card loads fine judging from /var/log/messages but Asterisk gives an error when trying to load the chan_capi module. I'm using chan_capi-0.3.5, zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a msg that may be related and don't know

Hi all, i use asterisk 11.14.0 and I suspect that the voicemail application counts the time wrong. In my voicemail.conf: [general] minsecs=3 maxsilence=5 format=wav maxsecs=180 silencethreshold=140 [...cut..] In the asterisk-cli: [Jan 26 15:23:49] -- Executing [s at macro-voicemail:77]VoiceMail("SIP/XY-0005175a", "aNumber,su") in new stack [Jan 26 15:24:04] --

Greetings All, Regarding this archived post. http://lists.digium.com/pipermail/asterisk-users/2014-November/285169.html Did anyone ever find an solution to this? I've got a new box running 13.3.0 with the exact same issue. For those that don't read the link. I've got SIP Peers in realtime. All with a mailbox set. 98% of the time, These are loaded into asterisk without

MixMonitor seems to work: -- User hit '*3' to record call. filename: auto-1250792853-24-22 == Begin MixMonitor Recording SIP/snom2-084c4ec8 /var/spool/asterisk/monitor/auto-1250792853-24-22.wav exists now. Recording a call without mixing fails. > User hit '*1' to record call. filename: wav,auto-1250793354-24-22,m TOUCH_MONITOR_OUTPUT is set to

Hi, in the Snom FAQ I found the following information: After staring up, the phone tries the URL given in the "Setting URL" of the phone. ... BTW this setting can also be set via DHCP. .... option tftp-server-name "http://192.168.0.9/snom200{mac}.htm" The documents used: FAQ-04-06-14-sf.pdf "Setting up DHCP for snom phones" FAQ-04-03-24-sf.pdf "How can I

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

Hmmm. Not having much luck with this. I'm trying to call the DUNDILOOKUP function and assign it to a variable in an AGI script. I've tried setting with EXEC CMD and with SET VARIABLE. In both cases, it's treating DUNDILOOKUP literally, rather than calling a funciton. I've tried this: EXEC "Set" "DIALPATH=${DUNDILOOKUP(2944093|180net)}" and also: SET VARIABLE

Hi I put a snapshot of our current packages updates.xorcom.com . They are available from the deb source deb http://updates.xorcom.com/test sarge main (this is s/rapid/test/ of the name of the source of the stable version) Changes include: * Fixed and simplified zaptel detection * Support for spandsp: compiled but not yet tested * IAX extensions * Mail server configuration * The script

Hi, I have installed Asterisk 1.4.20 on Debian Etch. The server has no telephony card installed, but I have anyhow installed Zaptel (Zaptel-1.4.9) in order to be able to use MeetMe. The Zaptel modules load normally. I obtain the following prompts: kerplunk:/# /etc/init.d/zaptel start Loading zaptel framework: done. Waiting for zap to come online...OK Loading zaptel hardware modules: ztdummy.

Anybody has a (even partial) ftplugin/syntax hilighting for editing asterisk config files in vim? How about for other text editors? I have been known to even be using emacs variants if it provides a useful mode ;-) -- Tzafrir Cohen +---------------------------+ http://www.technion.ac.il/~tzafrir/ |vim is a mutt's best friend| mailto:tzafrir@technion.ac.il

On 26-10-16 15:03, Dan Jenkins wrote: > > > On Wed, Oct 26, 2016 at 1:46 PM, Jonas Kellens > <jonas.kellens at telenet.be <mailto:jonas.kellens at telenet.be>> wrote: > > Hello > > > I keep getting the following error when trying to connect to the > Asterisk server using AMI : > > $socket = fsockopen("tls://11.22.33.44 >

Try different entry in this parameter. In Italy mobiles start with 3, while public services with 1 and normal user numbers with 0. Using pridialplan=none, every number different from 0 was resulting in termination code 1, normally used for number never seen on the network. Ciao Mauro

Does any one regularly reboot GS101? It sometimes lost registration with * and needs to be reboot. What is the best way to do it by cron? David Kwok

Hi All, I'm tring to do some DB operations before and after a call. I see the 'g' option in dial to continue in context if the destination hangs up, but what if the originator hangs up? Basically I do a DB get/put before the call is placed. After the call is completed I want to do another get/put; however the dial application dies when the originator hangs up. Any way to get around

Since upgrading from stable to latest cvs I can't place CAPI calls (AVM Fritz/chan_capi-0.3.1) Did I miss something that has to be changed in configfiles? Also tried to recompile chan_capi which run into an error. capi info shows me: Contr1: 2 B channels total, 2 B channels free. Any suggestions to these logfile snippets jo ---------------------------- * to ISDN -- Accepting

I've just compilied th latest CVS of * with USE_MYSQL_FRIENDS enabled ("1"). During startup * tells me that it connects to the db, so this should be fine. Nevertheless I don't see any users from the db when I run "sip show users" or "iax2 show users" although I configured some. It is also not possible to call them. Any hints?

Hello, I'm in the process of trying to get Festival to work with Asterisk. I followed the install process at http://www.voip-info.org/wiki-Asterisk+festival+installation. To get the Festival to compile I had to add the patch described in the comments. Once added, Festival and the Speech tools compiled without error. How ever, when ever I try to call the test extension, I get a busy