similar to: Using an analog modem through asterisk (zap channels)

I believe it is not fiber, but I am not sure. I am going to take one of them home tonight and hook it to my POTS line there, which for sure is not fiber. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Michael Welter Sent:

All, I need help. I have an (actually 2) Adtran TA750's with 8 FXO ports. I get a terrible buzz on every FXO port. If I unplug the Adtran and put an analog phone on each incoming line, I have no buzz. I also have 2 Carrier Access Access Bank I's with 12 FXO ports. When I plug the same analog lines into either one of those, no noise or buzz whatsoever. I went so far as to move the TA750

hi all, when i start * all zap channels get ring signal so i get a huge number of incoming dummy calls when starting *. i'm using TE105P with 4 TA750 full fxo with latest CVS HEAD: zaptel.conf: span=1,0,0,esf,b8zs fxsks=1-24 span=2,0,0,esf,b8zs fxsks=25-48 span=3,0,0,esf,b8zs fxsks=49-72 span=4,0,0,esf,b8zs fxsks=73-96 loadzone=us defaultzone=us zapata.conf: [channels] context=incoming

I've seen people mention that they have fax reception working with Asterisk, spandsp, and app_rxfax. I'm using the latest Asterisk from CVS, SpanDSP 0.0.1k, and the latest app_rxfax.c (as mirrored by friendly list members recently), and libtiff 3.5.7. Asterisk is detecting the fax signal properly, and executing the fax extension in the dialplan. The fax part of the dialplan is pretty

(to mods: sorry for any extra work I've put you through. Posting from my work account, as proper) Hello all, I'm back. I've got that lucky feeling that this will all work out very soon, and I hope that that is true. The issue: In my * server I have a t100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm

In my * server I have a T100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm on the card starts blinking red. Running zttool confirmed that yes, it is a red alarm. I've read a few previous posts on this type of setup and I'm not too much closer. What should I be checking next? A different cable? The

Hello all, I've got a T100P connected to an Adtran TA750 with a T1 crossover... This connects to a patch panel with phone ports. The Adtran is fully populated with FXS cards. All I get on any phone port is a fast clicking noise... No dialtone. Asterisk 'sees' the card, (the channels show up in /proc/zaptel). Incoming calls are routed to the zap/x channel, but no ring. I'm

Hi everyone, I just got a Sipura SPA-1001 and have connected my Tivo Series 1 (yes its old). When I do a test call with Tivo, the call always fails (it seems to dial the number but never connects). I can pick up the phone line and hear the Tivo "talking". I've tried looking around for anything special I need to do but its still not working. I can connect a phone to the SPA-1001

Hello, I am currently trying to configure an Asterisk (current 1.4) box with a TDM410P and 2 FXS as well as 2FXO modules. An analog modem is directly connected to the TDM (port 4) which itself is directly connected to the PSTN (port 1). [V.34 Modem]-----[TDM on Ast. 1.4 TDM]---PSTN When I try to establish an analog modem connection with this setup, the modem is unable to connect to the remote

Jay, I have had a lot of trouble with the FXO ports on Adtran TA750. Unless the incoming POTS lines have a balance impedance, they will buzz very bad. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Sunday, April

All, Thanks for taking time to read. I am wanting someone to tell me that I have a clue here and that the following proposed setup would (possibly) work. Currently existing are 4 pots lines with qty. 10 AT&T 954/854 phones. Would like to convert to asterisk and at the same time do a mild feature upgrade. Proposing to get: PIII 800MHz or better >=256MB RAM

Is there any way to fill in the DID information for analog Zap channels? I've got a TDM422P and since I know the phone numbers associated with each of the 2 FXO channels I'd like to set that so that future extensions contexts can use it and the caller-id info in the form mydidnum/callerid like I can with VOIP DIDs. I haven't found if there is a variable that can be set with this info.

Rob at draughon.org writes > I recently obtained a Western Electric multi-line phone and am >seeking help with getting this beast working with *. > > The interesting stuff in my * implementation consists of a T100P >card, a TDM400P card, and an Adtran TA750 channel bank with three quad-port >FXS modules and a quad-port FXO. The TA750 is wired to a 24-port Cat 5 patch >panel

Hi I am using a 4FXO , TDM400P card I am able to call outside , after modifiying extensions.conf with exten => _9X.,1,Dial(ZAP/1/${EXTEN:1}) using this , I can only dial through one of the port , Actually I want to dial outside using round - robin search After reading the manuals , I have plans to modified the above line as exten =>

Hello, I new to this, but with the help of mailing lists archives and IRC I am able to build my PBX. Thanks to all who had help me to reach till here. I am stuck at a point where I can't find the solution on mailing lists or even on IRC. I have individual 4 DID (Direct Inward Line) coming from Telco and terminating into TA 750 to FXS card. Many of them told that Phone instrument terminates

Hey guys, As some of you may or may not know, TiVo recently came out with an optional software package for their Series2 TiVo units. They call it "Home Media Option" and, among other things, it lets you play mp3s on your TiVo. So, some clever folks figure out that if you fed your TiVo and m3u playlist that pointed to an Internet stream, it would play that stream for you. Very

Folks, I recently obtained a Western Electric multi-line phone and am seeking help with getting this beast working with *. The interesting stuff in my * implementation consists of a T100P card, a TDM400P card, and an Adtran TA750 channel bank with three quad-port FXS modules and a quad-port FXO. The TA750 is wired to a 24-port Cat 5 patch panel via a 25-pair Amp cable. The phone is a model

Hi, maybe this has been asked before but I couldnt find a proper answer on the web or list. I want to use a analog V.92 modem to make outgoing (and possibly) incoming phone call through a standard analog phone line. I found on web it's easy been done via chan_modem.so module. But this seems removed from asterisk or buggy. So my questions are can I enable chan_modem.so to be built or

Hello, We keep having a really bad static problem on phone calls completed using a Adtran TA750 and T100P card. The phones are Polycom IP 500 phones and, it occurs across all phones. Not just one. Everything appears to be on it's own interrupt. I noticed the last time we did this, we rewired everything to make sure it wasn't an electrical issue. Well about a month and a half later

I am having a problem trying to do inband DTMF passthru via asterisk. My setup: PSTN gateway MAXTNT v11.0 SIP (T1 PRI/NT2) Asterisk HEAD or v1.0 makes no difference (I am using HEAD mostly) 12/10/04 and 01/17/05 (no difference) CAC ABII-T100P to/from analog lines to/from asterisk BTW, I have used a ABI and it works just like the ABII with asterisk. What I am seeing is: I make a call from a