similar to: Help with a fax via Grandstream Handytone 286?

I have a T100P card connected to an Adtran and then a T1. I have added the following configurations to Asterisk...but, when I dial 9 and then a local phone number, it bounces between the dial tone and silence and the *error* light on the Adtran blinks. zaptel.conf span=1,0,0,esf,b8zs fxsks=1-8 loadzone=us defaultzone=us zapata.conf [channels] context=from-sip signalling=fxs_ks

I am trying to get the handytone 286 to make a very simple call to * and having problems. It registers with * just fine, but when I place a call (to echo test, for example), the RTP stream seems to have problems opening. Here is there error I get in *: WARNING[98311]: File chan_sip.c, Line 464 (retrans_pkt): Maximum retries exceeded on call 20d1c411-e210-5f3d-3f88-19035c8fcb26@192.168.2.6 for

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

Pardon the newb question and all, but this is my first real experience with phone systems, let alone VoIP and Asterisk. I'm building an office space for a former employer and we are considering Asterisk as the phone system there. But, I've never set up an Asterisk system before so I've got a couple of questions about the required hardware. The network architecture is pretty

I remember a thread a while back asking about Linux distro's of choice. My flavor is Archlinux. But, I found a tiny discrepancy with Arch and Asterisk's install. Arch uses *mawk* for it's awk compiler, unfortunately...Asterisk doesn't seem to pick up on it. So, I installed *gawk* as well...and the install went smoothly after that. Just a heads up if you choose Archlinux

I don't know what I am missing in my conf files, but my T1 card grabs all available channels and won't let go of them? Anyone know what the problem is? -- Shawn Parker Network Administrator Cumulus Broadcasting, LLC. Columbia-Jefferson City, Missouri 1.573.449.4141 shawn.parker@cumulus.com

i know asterisk itself will install on a linux kernel 2.6.x, but i've seen places say that the zaptel drivers wont? is this still true? is it possible to build asterisk/zaptel on a linux 2.6.x kernel? -- Shawn Parker Network Administrator Cumulus Broadcasting, LLC. Columbia-Jefferson City, Missouri 1.573.449.4141 shawn.parker@cumulus.com

Hello, I bought a Grandstream Handytone 486 to forward incoming calls from our old analogue PBX to the asterisk server. My first test was connecting an analogue phone to the Handytone and calling a sip phone - worked. Now I used the same cable to connect the line port of the Handytone to the analogue pbx. When I call the number of the analogue PBX I hear a clicking inside, but the call

Hi, Just received recently released Grandstream handytone 286 ATA for testing. I can call ATA from any other extensions and conversations seems to be of quite good quality. However placing calls from ATA is not possible at all to any extensions. After dialing there no indications of any kind from ATA at all. It just "hangs in there". ATA is behind NAT, registers to an * with public IP

Like many others on this list, I had been experiencing periodic lockups with my Grandstream products (Handytone 286 ATA & BudgeTone 101). The lockups consisted of seemingly dead devices, no dialtone or response, until I power cycled via software or hardware. The workaround had been to reboot the device every 30 minutes with a cron job. I contacted Grandstream and although they didn't

Hi anyone know if i can connect a Grandstream HandyTone 488 to Asterisk ? Actually my HandyTone 488 are connected to: wan port to my lan line FXO port are connected to my local analogic line i want that when a call in by my analog line, it's sent to my asterisk for other voip post can answer .. it's possible ? thanks bye

There seems to be a problem related to the Grandstream HandyTone-286. When a call is placed through the adapter, the call can be transferred. However, when a call is received through the adapter, the call cannot be transferred. The problem does not exist with a BudgeTone-101 (1.0.4.23) using the same Asterisk configuration and Dial() settings (Ttm). I tried all of the firmware on their BETA

Hello, Has anyone gotten a Grandstream BT100 to work with Level 3's 3Tone? I've been able to get my extension to interface with it, but there is no sound and the call on the GS side terminates prematurely. Here is the relavent portion of the SIP.CONF [4007] ; Budgetone BT100 type=friend insecure=yes context=test-budget username=4007 fromuser=4007 callerid=4007 host=dynamic nat=yes

can someone who has a grandstream handytone 488 working with making outgoing calls through the fxo port please post the parts of their config that deal with this port? i cant quite seem to get it to make outgoing calls despite having tried several completely different ways of making that happen. i have been told that asterisk@home has this built in to just a button hit, but i dont want to

Hi ; Have two handytone 486 and want to use them as digium TDM400 fxo-fxs card... I mean is it possible to direct pstn calls from astersik (extensions) to handytone line port directly and vice versa ?... Thanks in advance Betul Onemli not : Bu e-mail iletisi, sadece adreste belirtilen kisi veya kurulusun kullanimini hedeflemekte olup, mesajda yer alan bilgiler kisiye ozel ve gizli

Hi I have a analog phone connected to my Gateway Handytone and registered to Asterisk 1.4 I have configured my HandyTone 488 (in the section FXS Port) for make and receive calls, however I can not transfer a call when it come via PSTN. But, when a call come from via IP I can transfer it. [phoneanalog] type=friend secret=XXXXXXX context=local nat=no qualify=yes host=dynamic dtmfmode=rfc2833

Hi All, I've an Asterisk Server behind a NAT. Using DNAT, I've opened port 5060 and all 10000:20000 udp. Sip configured with externalip and subnet. I've another site, also with NAT, where I map the rtp port (as defined in the client) to map to the local client (DNAT). Using Xlite, this configuration works, it requires using the quality=yes and NAT=yes/always in the sip ext

Hi Has anyone opened up a grandstream phone or handytone ATA to find out what is inside? What is the CPU? How much RAM? Cheers Rob

Shawn, That's a complete load of manure. I have an office full of 7960's, they work great with asterisk with the SIP images loaded. I'm about to pick up a lot of 7912's (simple one line phones, same as the 7905 but it has a built in switch). These phones have also been confirmed to work with Asterisk. I would recommend not going directly to cisco, and just find a reseller who

Somone in europe have had succes getting Callir ID showed on a phone screen conected to an Handytone 286 ? Adri? Vidal -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 235 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041124/e5514052/attachment.bin