similar to: chan_sccp with multi-lines and 7960's

I am using chan_sccp on bristuffed asterisk (0.2RC3 on asterisk 1.0.3). Things seem fine but I am seeing some weird stuff. I have a Kirk IP600 connecting to * with 2 handsets. The weird thing is that for incoming calls the handset that is put second as my dialstring, never rings. This is my dial string: exten => 666666666,4,Dial(${PHONE1}&${DECT1}&${DECT2}),25,tm) Where DECT1

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

Dear all, I've been taking my baby-steps toward setting up an Asterisk phone system in my office, as also between my home and office (connected by DSL). I'm have a rough time getting two * boxes talk IAX over a LAN. I don't know what I am doing wrong, but am attaching my iax.conf and extensions.conf on both the boxes. Does anyone see it? ------config files start------ site-0

I've just installed asterisk on a Debian Linux (apt-get it) And i have placed two sip phones in sip.conf and i'm testing parking with them I have phone1-SIP/1000 and phone2-SIP/1007 The following happens if i park from calling party and everything is OK 1. Pickup Phone2 and call to Phone1 2. Talk 3. Phone2 dials #700 and parks the call (it is placed in 701) 4. Phone2 is hangup 5. Pickup

Hi! I want to tell asterisk to simply pass-through any codecs that my phones support. I have to use codecs that are not popular and implemented by a third-party, asterisk has nothing to do with them. I've made a test with g722 (that asterisk doesn't support), i've set all my two snom 300 phones to support only g722 and asterisk declined the sip invitation. That is bad for me. Is it

Hi, I installed Asterisk an all works fine exept for Grandstream. When I call with a softphone (ex X-ten) to a Grandstream (BudgetTone-100), I can make a conversation. = ok When I call to a softphone with a Grandstream I can pich up the call with the softphone but the Grandstream keeps ringing like on the other site you didn't pick up the phone.(even if you do so) It's the same when I

Hi! Maybe you can help me. I want to tell asterisk to simply pass-through any codecs that my phones support. I have to use codecs that are not popular and implemented by a third-party, asterisk has nothing to do with them. I've made a test with g722, i've set all my two snom 300 phones to support only g722 and asterisk declined the sip invitation. That is bad for me. Is it possible that

Dear, When I start asterisk -vvvvvvgrc and I ask 'sip show peers', I don't get the ip adress in the 'Host" field. Name = phone1 and phone2 Host=unspecified mask 255.255.255.255 port = 0 status = unmonitored I can ping the two phone's and get a reply (also from the laptop) phone ip adres 192.168.10.12 and 192.168.10.13 (server 192.168.10.11and laptop 192.168.10.14)

I'm setting up a queue for two independent operator phones that are capable of answering multiple calls at once. It's currently working with the following settings and Asterisk 1.4: queues.conf: [telefonistas] strategy=roundrobin ;strategy=leastrecent music=default timeout=60 retry=0 maxlen=0 wrapuptime=0 ringinuse=yes autofill=yes joinempty=yes member => SIP/8899 member =>

I don't know if this is possible, and I can't quite get my head around how to do it... If I am using DUNDi for redundancy in a cluster, when Phone1 makes a call to Phone2, both Asterisk A and B will be in the RTP stream: +---+ +---+ | A |-----| B | /+---+ +---+\ / \ Phone1 Phone2 Is there a way configure re-invites

Hi everybody, I have still problem with setting-up asterisk. I use asterisk with gnu gatekeeper and h323 phones. I read lots of much documents, but there's no any reference to setting-up "how to put on hold an incomming call". I mean: 1.) somebody call me from PSTN (via my ISDN BRI card in asterisk); 2.) asterisk routes this call to gatekeeper and finaly I pick up call by my

Hi, I've have followed through the help docs in trying to get an initial setup going with two phones and the asterisk server. Firstly, all I'm trying to do is get the two phones actually talking to one another VIA asterisk.. I've added this to sip.conf: [phone1] type=friend host=dynamic defaultip=192.168.1.106 ;username=blah ;secret=blah dtmfmode=rfc2833 ; Choices are inband,

Hi, Actually on my setup all outgoing calls are going trhu a SIP unique account A have a second SIP account with another operator and I would like my setup to use alternatively each of the two accoutns Call 1=> Dial SIP/phone1 Call 2=> Dial SIP/phone2 Call 3=> Dial SIP/phone1 <...> If you have an sample please let me know

I am new to asterisk and need to dig up some info on how to set it all up. It looks a bit daunting especially all the options available in the .conf files. I have 2 SIP phones, GXP2000 and a budgettone 100. phone1 - 192.168.0.160/24 extension 1000 phone2 - 192.168.0.161/24 extension 1001 Server - 192.168.0.57 I get the following all the time, but can make calls between the 2 extensions,

Hello there, I appreciate any help about this problem that I can't figure out... I need to record all my calls: this is pretty easy using Monitor() before the Dial(). eg: exten => 425,n,Monitor(wav49,/var/spool/asterisk/monitor/425/${EPOCH}_${CALLERID(num)}_in,mb) exten => 425,n,Dial(${PHONE1},10) Now, I want to create a call group: I mean, I want a number (eg 800) that makes

Hi Folks, Just wondering if anyone can give me some pointers, I'm configuring Asterisk to talk to FWD's new IAX service. The asterisk server is behind an iptables NAT Firewall, with port 5036 forwarded: $IPTABLES -t nat -A PREROUTING -p udp -d $EXTERNAL_IP --dport 5036 -j DNAT --to-destination 172.16.20.200:5036 I can make outgoing calls just fine, but when I receive an inbound call

I have the following asterisk configuration (sip.conf) : [General] externip=82.79.81.3 localnet=192.168.10.0 localmask=255.255.255.0 [Phone1] type=friend host=dynamic nat=yes qualify=yes context=sip callerid="Phone1" <1> disallow=all allow=gsm [Phone2] type=friend host=dynamic qualify=yes context=sip callerid="Phone2" <2> disallow=all allow=gsm [Phone3]

Hello I have one phone (phone1) in one network, the other (phone2) in public network. both can call the other side; phone1 can be heard by phone2, phone2 can't be heard. I don't have NAT set on both end, but I use rtpproxy on SER. Is NAT still necessary to be set on both phones? Thank you! steven

Hi all I have registered my phone1 in asterisk server 192.168.0.9 and phone2 in asterisk server 192.168.0.6. Both are sip phones. i configured the extensions.conf file in both the server. the extensions.conf file on server 192.168.0.9 is exten=>301,1,Dial(SIP/301@192.168.0.6,20,tr) exten=>401,1,Dial(SIP/phone1,20,tr) 301 is the extension number for phone 2 in asterisk server

Okay, so like this? PHONE1+AD0-SIP/2000 PHONE2+AD0-SIP/3000 PHONE3+AD0-SIP/4000 ALL+AD0AJAB7-PHONE1+AH0AJgAkAHs-PHONE2+AH0AJgAkAHs-PHONE3+AH0- Then you would have Exten +AD0APg- s,1,Dial(+ACQAew-ALL+AH0-,20) Is that right? I have read about the Macros but don't understand their use. Could someone provide an example? Sorry about the newby questions... This will hopefully be my