similar to: asterisk & chan_sccp

Hi, Does anybody knows how to get this work? I have been searching all over and can?t find the way. Using chan_sccp tge phone can log in and has line tone. But the problem is that it is not able to receive nor dial out. Any help would be apprecieted. Thanks Javier --------------------------------- Sell on Yahoo! Auctions - No fees. Bid on great items. -------------- next part

We have 4 employees and we're running Cisco 7970 phones. Each phone has a unique SCCP line configured (in the autologin area of the sccp.conf file) for each employee. We have hints set up in the extension.conf file like the following: exten => 101,hint,SCCP/101 exten => 102,hint,SCCP/102 exten => 103,hint,SCCP/103 exten => 104,hint,SCCP/104 We have speeddial= lines set

Hello @List, i'm using a Cisco 7970 / 7914 phone with Asterisk 1.4 & sccp part of my sccp.conf type = 7914 (Cisco 7970 with 7914 phone extension) autologin = 117 description = Test speeddial = 10,Test (10),10@mycompany my speeddial line is for internal call howto call a external number eg. +xx467584933 ?? i want to press a button and call directly out thank you greetings, Daniel

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

This is the first release in the stable 1.4 series. This series will be maintained on the lp:lightdm/1.4 branch and trunk (lp:lightdm) will now be used for the unstable 1.5 series. Overview of changes in lightdm 1.4.0 * Correctly implement and test autologin timeouts * Add greeter-show-remote-login hint * Correctly annotate enums in vapi file * QLightDM: Add default constructor

Hello, in the assumption that I understand them correctly I specified in /etc/lightdm/lightdm.conf autologin-user=xxxx autologin-user-timeout=10 so that after 10 seconds the user xxxx is logged-in automatically. What happens is that the user xxxx is logged-in immediately i.e. without any delay. Do I understand the second variable wrong or am I missing something? Thanks for any help. K.D.J.

How do you enable auto-login? I went into /etc/lightdm/lightdm.conf, uncommented autologin-user (and set it to = my login name), and uncommented autologin-user-timeout (and set it to = 0). Is there something else I missed? -- Jason Hsu <jhsu802701 at jasonhsu.com>

Can skinny work behind NAT? I have a Cisco 7910 using SCCP behind NAT that has one way audio. The called party cannot hear the calling party who's using the 7910. skinny.conf ; ; Skinny Configuration for Asterisk ; [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 0.0.0.0 ; Address to bind to dateFormat = M-D-Y ; M,D,Y in any order (5 chars max)

I've added lines like this: speeddial = 123,test speeddial = 260,Bob in the [device] section for my 7921, but the speed dials do NOT appear on the menu (click right from the main screen). Am I missing something obvious here? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, Is there a "speed dial" type application in *? The NEC PBX we currently use has a feature which allows any phone to access a system-wide speed dail database simply by keying the speed-dial number and pressing the 'redial' key from any extension. Even using a vinella phone on an sli the user can dial 77+speedial# and access this directory. Does * have a similar

I get the following message when I dial 74#. Does anyone have any ideas on what might be going on? If I don't require numbers to be terminated with # everything works as expected, but you have to wait for the digit timeout, of course. MESSEGE: DEBUG[1150520624]: File pbx.c, Line 1683 (ast_pbx_run): Oooh, got something to jump out with ('#')! -- Invalid extension '#' in

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

Since 1.4 ALERT_INFO variable has been deprecated. I used to send this via AMI: Action: Originate Channel: Sip/1234 Application: AgentLogin Data: 1234 Variable: _ALERT_INFO=info=alert-autoanswer Callerid: AutoLogin[1234] In order to send an autologin and autoanswer call to the agent 1234 on an Aastra phone at extension 1234. (just for example). Now in * 1.4 with ALERT_INFO deprecated I

Hi! I have two, not too related questions: - the probably simpler one: if anyone can help me out using a Cisco 7905G with chan_sccp? I did already managed to get it working with a SIP image, I'd just like to see it work with this one as well. It's probably something I screw up with the configuration, as the phone registers, only I don't get any lines with it, although I have it

I just installed Centos (version 4.4) and wondering how I can change things so I don't have to login. I am aware of the security implications for doing this but I would prefer this if I can do it. I believe it has something to do with autologin and if so how is this configured ?? --- Ted Gervais, Coldbrook, Nova Scotia, Canada

I am running 5.3 on x86_64. I have it set to auto login X11 by editing the /etc/gdm/custom.conf file. Seems like it does NOT always auto login. Seems like maybe 75% of the time it does but then sometimes it doesnt. How can I find out why it doesnt always login? when it doesnt I dont see anything in dmesg or /var/log/messages. Any thoughts are appreciated. Jerry

Hi all, I bought a couple phones for really cheap just for a simple solution. I'm trying to get a few 7910 to work with *. I'm just not sure how to get them to work. The 7910 just sits there "configuring IP" Here is a copy of my skinny.conf. the extensions.conf is default. I just want to bring the system up in default before a start making changes. Do I need to make

I have a bunch of 7910's that I managed to get registered with Asterisk 1.2.14: managed5*CLI> skinny show devices Name DeviceId IP TypeId R Model NL -------------------- ---------------- --------------- ------ - ------ -- test7 SEP0004C1878F8E 192.168.0.226 6 Y 7910 1 The problem is that the phone resets when I attempt to make a call from it or place a call to it. If I pick up I have

sorry - hope this question is not tooo silly, but i needed to "autologin" to a remote machine found out that this works fine for me: sftp -opassword=PASSWORD USER at 192.168.1.1 << EOF cd ANYDIRECTORY get ANYFILE bye EOF why isn't this (sftp -opassword=SECRET USER at 192.168.1.1), setting the password with -opassword=PASSWORD, documentated anywhere? bug or feature? kind

Hi, This is a message I already posted on the chan_sccp mailing list, but since this list has a lot of active members, I'm hoping someone might be able to help (And my problem is * related, so I guess it's ok if I post it here also ;) ). I'm trying to get SCCP ATA188s to run with Asterisk. The Asterisk box uses the latest Asterisk@Home image (Version 2.6). I have compiled and