similar to: Using Lucent/Avaya 64XX sets with asterisk

Hello, We want to make H323 calls between asterisk and avaya(lucent) pbx. We create node-name,H.323 signaling group,trunk, but we can not make H.323 calls to asterisk. Also no warnings exist in debug. Instead of giving the IP of Asterisk ,i give my computer's IP and run SJPhone ith H.323 GUI. In this time, connection is established. SJPhone accepts H323 calls but Asterisk does not. Do

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the

Hi, I'm a lab manager / supervisor at our labs. We've had Asterisk in use for over a year directly hooked to the PSTN - a no brainer for configuration (although I had to fix some AT&T specific things in libpri). Right now I have two big challenges. One is to hook our box up lineside to a Lucent Definity G3R. Avaya is chasing this from their end, but we had the highest level of

Hi everyone, We have been working with Asterisk for a while now and would really like to expand its capabilities by fully integrating it with our Definity g3si and are wondering about other peoples experiences with similar setups. Thus far we have only been able to achieve a partial 1 way integration, but ultimately would love to route inbound voip calls to the asterisk out of the lucent.

May be force be with you hello, We want to make H323 calls beteen asterisk and avaya(lucent) pbx. We create node-name,H.323 signaling group,trunk, but we can not make H.323 calls to asterisk. Also no warnings exist in debug. Instead of giving the IP of Asterisk ,i give my computer's IP and run SJPhone ith H.323 GUI. In this time, connection is established. SJPhone accepts H323 calls but

We've moved within the last two months to Asterisk 1.4.x All remote facilities are connected via highspeed (9mbit) connections (Over OpenVPN) to a central Asterisk box, acting as a voice router, that funnels all calls into our Avaya Definity G3R via PRI. When corporate employees visit the remote facilities and try to call the G3R's voice mail system(Audix), DTMF is not recognized unless

Calling all Definity admins, Got a few questions about Definity -> Asterisk interoperability. 1) What are the options for integration? Can I hand off extensions from the Definity and vice versa? 2) Anybody have any working configs they would like to post? I've found and read the legacy integration on the wiki about the two systems. I've also googled and found a few threads that were

Hey everybody, I've just spent the last two hours Googling and searching the Wiki. I'm trying to find if there are any listings of codes for the Avaya Definity G3R, to allow for an Asterisk system to turn on/off a phones MWI that is attached to a G3. We are looking to use an Asterisk system as a voice mail server. I'm not having any luck, anybody have such information? Thanks,

We have had quite a bit of success with our T100P and TE410P cards interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3 using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in 5ESS mode). In the near future, I may also need to interface to a Definity via a T1. I was planning to use PRI--is that an option for you on your switch? -----Original

Hi Everyone, So I have been further exploring the integration of our asterisk server and our lucent definity g3si system. I took the suggestion of setting up an isdn-pri line added the two way tie trunk and the signalling group, but can't seem to get the PRI signalling working on the asterisk correctly. I've set pri type to network on the lucent, and pri_cpe in zapata on the asterisk, but

The company I work for has deployed an Avaya IP phone system. They have deployed the Avaya 4602 and 4620 IP telephones. They might be sending me one of these phones for use in my home office. Question: Can I make this IP telephone register and work with my Asterisk server? I don't know if it is a SIP phone? I searched thru the Avaya site, but can't find whether it's a SIP phone or

Does Asterisk work with Lucent or any other PBX phone systems????

Hi All, I need help with integrating AVAYA 8300, the avaya can do outbound calls but cannot do inbound calls, im sending calls from sip to avaya using E1 ISDN line. My config was based on aspect dialer it's working with aspect but not with avaya. My config and error is below. zaptel.conf span=1,1,1,ccs,hdb3 bchan=1-15,17-31 dchan=16 zapata.conf group=0 context=avaya switchtype=euroisdn

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

LS, I've create on the SCO unix the same loginname as on my winNT pc sharing a directory is no problem I have read and write access to it. The problem arise when I try to login from another winNT account let say yoyo then a pop-up windows appears. When I fill my origineel account with password I am refuse. Does someone know how to solve this? dump of my smb.conf file: [global]

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23]

I've read the wiki and other resources on how to connect Vonage / Voicepulse and all these other services to Asterisk... We are attempting a connection to a Lucent iMerge. Lucent has told us that it won't work - but we feel confident that it will. Has anyone worked with the Lucent iMerge - or would be willing to help lend a hand? It is capable of H323 / MGCP. Even if I could make the

Is anyone out there using Lucent brand equipment to handle an incomming DS3, converting all 672 calls to SIP (as G729) and sending those to Asterisk/SER over ethernet? If you are and are willing to speak to my boss about your experiences (over the phone) with it, please contact me off list. We have a possible contract with a local CLEC to handle their long distance, and they want to send to

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23] WARNING[6227]: