similar to: Dell PowerEdge 750 rackmount

Why PCI 3.3V for E1/T1 card!? I can not use it because I can not find any motherboard with PCI 3.3 . Any sugestions!? Cristian VASILIU AccessNET International S.A. Software Programmer mail to :<cvasiliu@accessnet.ro> www:<http://cvasiliu.home.ro>

Hello, does anyone run xen on an dell poweredge 750 ? I am getting the following scsi errors on the raid driver on hight I/O load. aacraid: Host adapter reset request. SCSI hang ? aacraid: SCSI bus appears hung with kernel 2.6.8 the whole maschine hang on this error. now I am using xen 2.0.6 with kernel 2.6.11.10 and the latest aacraid driver from adaptect. so the device only hang ca 1:30

Hi, I've been asked to find a server that is capable of running the Digium TE410P card. We usually get Dell PE servers and after a quick look I think the PE 1800 has the required slot: Six Total: 2 PCI Express (x8 lane & x4 lane); 2 x 64-bit/100MHz PCI-X; 1 x 32-bit/33MHz PCI (5v) and 1 x 64-bit/66MHz PCI Has anyone got this hardware, does it work with the card and asterisk? Thanks,

Hi- I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is: http://www.evtmedia.com/TE410P.htm I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longer than the TE410P board requires, but the PCI connector

Subject: [Sharing] CentOS 8.2 (2004) Linux Server is Compatible with Dell PowerEdge R640 1U Server Good day from Singapore, I have just installed CentOS 8.2 (2004) Linux Server on Dell PowerEdge R640 1U Server for "Donald Trump and Xi Jinping Investment Company LLP" (fictitious/fictional company name used) in Singapore on 11 August 2020 Tuesday. I can confirm that CentOS 8.2

Hi- I'm looking for an appropriate system board to power a system with two (2) Digium TE410P cards. Since these cards require the 3.3 volt PCI, I'm considering vendors like Tyan for the motherboard. Can anyone please tell me their experiences with the Tyan i7501 series (Xeon-basd), or recommend an alternate motherboard? Thanks Scott Scott M. Stingel Emerging Voice Technology Inc.

Hi, I am running Dell R630 Poweredge 1U with 32 cores vCPU's and 96 GB RAM. What should be the minimum numbers of CPU cores and memory that should be reserved for host OS (CentOS 7.6) and the remaining CPU cores and memory resources to be allocated for Guest OS? I look forward to hearing from you and thanks in advance. Best Regards, Kaushal

Hi- I have an upcoming application that requires use of PRI channels that are primarily used for high-volume incoming traffic, but that are to be used for outbound calling as well. Of course, one option is to have dedicated outbound channels reserved, but this is an inefficient use of channel resources. Normally PBX's are designed to have the CPE yield to an incoming call if a particular

Hi, Is this server silent enough to be installed beside users in office environment ? http://www.dell.com/content/products/productdetails.aspx/pedge_860?c=us&cs=04&l=en&s=bsd Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070316/e657ef4d/attachment.htm

I am planning to buy Dell 2650 server with dual Xeon processors. And I would like to buy two TE410P cards for PCI with 3,3v. This is on Dell site about PCI slots for Dell 2650 server: 3 PCI-X (1x64-bit/133MHz, and 2x64-bit/100MHz) Does that mean I will be able to buy two TE410P cards ? Or I need to buy two TE405P cards ? Thanks for help. bartek

I'm looking for anyone who has some vendors for rackmount PC hardware in a fairly decent configuration for Asterisk/Digium T1 termination. I am looking for well-built hardware from an integrator that understands correct component choice. Preferably, I'd like SCSI but I might be able to do Ultra-IDE platforms. I need at least two PCI slots in the chassis (so 2u/3u size factor is OK.)

Hi all- Thanks to Mark Spencer for finding this patch: If you are experiencing leftover zombie processes from your AGI scripts that have terminated, this is apparently due to a RedHat 9 threading issue introduced in a recent update.... To get rid of this, try entering the following line before you start asterisk: export LD_ASSUME_KERNEL=2.4.1 It works for me - I'm still checking to

Hi all- Over the past week or two, I've been trying out asterisk under Fedora 1 Linux (RedHat). In my setup (single and dual Xeon motherboards), I have so far had a very good experience in terms of performance. In doing E1 load testing, I've found that Fedora handles heavy load much better than RedHat9, probably because of its better use of the multi-threading capabilities of the Xeon.

Hi all, I've struggled for several days trying to get a Digium TDM04B 4-port wxfco card working on a Dell 1U PowerEdge 750 machine running Fedora Core 1. I finally got a call back from Digium who indicated that there is a fundamental conflict between the card and the PowerEdge having to do with PCI interrupts. Asterisk version is stable v1-0 12/29/04. The symptoms of the problem were as

Has anyone had any compatibility issues with a TE110P card installed on a Dell Poweredge 1950? I noted the following error on the LCD display of the Dell Poweredge 1950: E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0,

Hello I just installed a TE110P in a Dell Poweredge 750 (rackmount), which is connected via crossover T1 cable to a adit 600. Anyway, I've encountered an array of errors, which I believe I have narrowed down to the 22 IRQ misses I encounter on zttool. I've noticed that the te110p and the usb device share an IRQ. Could that be the source of my woes? Would disabling the usb device in the

On Tue, Aug 27, 2019 at 1:05 PM Sven Schwedas <sven.schwedas@tao.at> wrote: > That depends on what you plan on doing with the host. IIRC live VM > migrations use host CPU time, and depending on transport can use quite a > bit of CPU (for encryption/compression). Same with storage, if you have > a ZFS/btrfs/LVM2/RAID/encryption setup that requires a lot of CPU, > that's

Hi- I'm almost embarrassed to ask the following simple question, following John's excellent and rigorous bandwidth analysis (see earlier thread): I have a straightforward Asterisk application, IVR-only (no connections between channels). It will simply decode DTMF's and speak prompts (probably A-Law encoded) on a number of E1 circuits simultaneously. Realistically, how many

Hello- Is it possible to set the CDR record field called "accountcode" from within the dialplan? Or is there another way to cause this field to be set, preferably without using AGI code. Thanks Scott Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England www.evtmedia.com

Hello- Has anyone had experience connecting to a Marconi switch (in the UK) using E1-PRI connections (TE410P)? In a new installation, my customer is getting yellow alarms on every channel about every 30 seconds. These alarms clear themselves immediately and then re-occur in another 30 seconds, ad infinitum. I used the same configuration that I've used successfully in the past while talking