similar to: Can PSTN CallerID be fowarded to a SIP phone extension?

Hi All, I am using a Grandstream BT100 and I have been trying to get the PBX features to work for DND, call foward, etc. These functions do work when I use my POTS phones hooked up to my Zap cards. But I cannot get the PBX functions (ie *78, *79) to work using my SIP phones. Is there a feature that has to be enabled to do this? I know these functions are available within the GS phone but all of

Hi All, I have tried searching everywhere but I cannot find a definitive answer as to if and how the conference button works on the BT100. Could anyone be kind enough to fill me in on some info on how to use the conferencing feature, as well as any configuration in asterisk thats needed, on this phone? Thank you, James -------------- next part -------------- An HTML attachment was scrubbed...

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some

I've been using Asterisk for a few weeks now. I have a (1) BT100 phone and a Sipura-2000 for all my analog phones. All has worked rather flawlessly, until today. I was on the BT100 phone today. During my phone conversation, the BT100 disconnected and went into a "click" mode. 2 "clicks" per second I think. Asterisk was fine, I picked up one of the analog phones,

I see my own number(or remote called num) instead of caller id on incoming calls on my BT-102. but on Xlite everyything is OK. I'm using * latest CVS. - shabanip

Hi, asterisk Users, sorry for my bad English. im really newbie with this excellent pbx. But I 've a problem with callerid num when I recive a call from PSTN. PSTN-> SipGateWay(Welltech3504)-> Asterisk-> BT100 How can I configure my asterisk to receive the callerid from callers and not the callerid from the extension of the SipGAteway. Extension of Gateway (sip.conf) [115]

Hello, I current using dovecot 2.0.11 and with all other 2x versions occurring the same problem. When i create the file .dovecot.sieve and compiled one .dovecot.svbin on user homedir, the imap show it like a folder, example: doveadm mailbox list -u user at domain.com .. .. *dovecot.sieve* *dovecot.svbin* .. .. I current using maildir and mail location is: *mail_location =

Hi, I cannot see cid for incomming call from PSTN (Quintum gateway) to IAX client (FireFly). Client displays blank but when I look into cdr's /var/log/asterisk/cdr-cvs/Master.cvs, the callerid is registered properly. Why it's not displaying? L.

Hi guys, I have a server in Debian 8 with Samba 4.2.2 compiled about sources. This server is my project for small busines and run all network funcitons. The functions like AD, DNS, DHCP, NTP, File Server, Print Server, Openfire, OCS, GLPI, Squid and Squidguard are work integrated on Domain perfectly. My problem is that some clients need run a windows aplication so I put a windows server as member

Hi, I use samba 4 like domain controler, file server and print server. I am using 4.4.13 version and all its ok. I decide test the new version 4.6 and I have a problem with print server. I can upload 64bits drivers but I cannot upload 32bits drivres. Always give an error. I try upload driver with Windows 7 64 and 32 bits. Some one can help me? King regards. André Freire Gerente de Tecnologia

Hi, I´m have a Samba 4 Domain Member that I use like a Proxy Server. I use Squid with NTLM Athentication and work perfecly. My problem is Squidguard with NTLM Authentication. If I use Samba 4.2.X in my Samba 4 Domain Controler I watch in Squid LOG only the user name but If I use Samba 4.1.x or 4.3.0 in my Domain Controler I watch in Squid LOG domain\\user name and Squidguard Authentication not

Hi, I use Samba4 domain controler since 4.0 version over Debian. Today I use Debian 9.8 and Samba 4.9.6 without problems in many productions environments. Last week I decide make a test with Debian 9.8 and Samba 4.10. All ocours very fine trough compile process but when I try create domain with 'samba-tool domain provision" nothing happen. The shell freeze and the process don't go

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

hi all i upgrade a bt100 phone and it can't resgister with asterisk Dec 1 13:25:49 NOTICE[1112980400]: chan_sip.c:7519 handle_request: Registration from '<sip:@172.16.4.249>' failed for '172.16.4.226' is was working with the version 1.0.5.3 some bady now what is hapening? thanks in advance Rodney

on i have a small question we have a linux box with a windows 2003 server well we natted all the ports and mail is working remote desktop is working web is working the only thing that does not work is vpn how can i foward vpn traffic to this server i checked the site and searched for foward vpn and got nothen can somone please enlight me where to start Marshal McInnis Tech / Web

I'm seeing all sorts of problems and it's probably more of my lack of experience than anything else. I have a BT100 running 1.0.6.7 code. When I go to the status page it says it's not registered (hmm, that's not good). I also can't get dial tone but I can dial! I'm afraid I'm lost any good pointers? I've done a sip debug and all I'm seeing for the BT100 -

Hi All, I'm trying to configure 2 GS BT100 connected to asterisk and Welltech 2 ports FXO gateway. I configure WellTech 2ports FXO and GS BT100, both GS BT100 can call each other without any problem but when I tried to call a local extensions connected to my Welltech FXO gateway, I couldn't hear any voice on both ends. I would like to ask if anyone has ever encountered this kind of

can anybody identify why the CLI is issuing a failure message while debug shows everything is fine???? this makes no sense to me. also, why is the username being updated? this has got to be wrong from CLI -- SIP Seeding '52221' at 52221@192.168.70.26:5060 for 3600 -- SIP Seeding '52221' at 52221@192.168.70.26:5060 for 3600 Dec 24 12:16:35 NOTICE[15776]:

Hi, I am getting the following error when I attempt to listen to voice messages by dialing 9999 (I can hear nothing): --Executing VoiceMailMain ("SIP/2092-6918", "2092") in new stack --Playing 'vm-password' (language 'en') WARNING: app_voicemail.c:4922 vm_authentication: Unable to read password. I read in previous posts that this may be to do with the dtmf

On 19/10/15 16:46, mathias dufresne wrote: > AD from Samba or Microsoft is mainly a database for storing users (and > associated stuffs). It comes also with stuffs (protocols) to connect and > retrieve information. > > How the client uses these information is, as always, a choice from that > specific client. > > Your AD client is your Squid/Squidguard(ian) server. Its job