similar to: asterisk start

Even though they make the cards and advertise that they support data modes, digium won't support data mode on the $500 card they sold to me, so I must turn to the list. Has anyone configured a T100P to use a T1 strictly as bandwidth? Is there a HOWTO somewhere? Wiki has nothing I could find. I've got plently of public IPs I can assign to it but don't know how. Thanks, Matthew -----

Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into

Hi guys, I have an Alcatel 4200 with a ISDN board pluged in the asterisk server with TE110P. Input calls VOIP Proider ---> Asterisk ---> Alcatel Output Calls VOIP Proider <--- Asterisk <--- Alcatel In alcatel phones, users should dial 2 for take a line tone and can dial. At this point start my problems: 1. When users dial 2 on phone (alcatel) they don't received a dial tone,

Hi, I have a PRI euroisdn link between an Alcatel PBX and Asterisk. I'm having some trouble with overlap dialing. Suppose I dial '874053' from an Alcatel extension ('7034') where '87' is an Alcatel prefix of type "ARS Prof.Trg Grp Seiz.with overlap". I'm expecting Asterisk to receive '1004053' (where '100' is a prefix which always shows

Hi, Is Asterisk "fully QSIG-compliant"? I currently have an Alcatel 4400 connected to Asterisk 1.2 and 1.4. Zaptel versions are 1.2.26 and 1.4.11. I am using switchtype=euroisdn and all works fine. However, it seems that Alcatel's latest firmware has dropped support for euroisdn which is really despicable. So now I need to see if I can migrate to QSIG which is supported by

Hi for all, i 've installed asterisk with isdn trunk with alcatel pabx. For alcatel users use asterisk lines, should dial 0 to take tone from asterisk. In default configuration in alcatel, if user dial 0 this error occour: !! Unexpected Channel selection 3 -- Extension '' in context 'default' from '' does not exist. Rejecting call on channel 0/31, span 1 In alcatel

An Asterisk extension calls an Alcatel extension via a PRI link which rings 4 times for about 10-15 seconds and then drops. So if the Alcatel user doesn't answer within 10-15 seconds the call is aborted. (A timeout is *not* specified in the Asterisk Dial command.) It seems however that either Asterisk or Alcatel drop the call prematurely (it's more likely to be on the Asterisk side). What

Hello, I have 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my <mailto:*@home> *@home 2.8 running on top of CentOS. Both FXO Ports are on ONE Digium card. What I would like is: If someone calls extn 281 on my Alcatel PBX it is routed through to Extn 233 on my * thruogh FXO port/module 4 If someone calls extn 282 on my Alcatel PBX it is routed through to Extn 234 on my *

Hi, Does anyone have any experience connecting asterisk to alcatel 4200 series pbx with bri cards? Does it should work with asterisk bri in NT mode, and alcatel bri with TE mode? Cheers, Igor Neves.

Hi, during gradual migration to Asterisk, I put Asterisk in front of a legacy Alcatel PBX: PRI PSTN <--> Asterisk <--> E1 cable <--> Alcatel PBX After successful deployment of VoIP phones, it's time to drop Alcatel PBX! I'd like to keep some of analog lines to support modem, fax and some older stuff. What's the best choice? A channel bank or a TDM2400P card? Can I

Hello, For a prospective customer, I need to evaluate the cost of an Alcatel OXE IP trunking licence price. The setup would be: PSTN -----<E1>---- Alcatel ----<SIP>----Asterisk ---------- SIP Phones At the moment, only a couple of simultaneous calls are needed between Alcatel PBX and Asterisk but later, this number will grow.

Hi There, I have an asterisk an a Digium 4 Port E1 Card On E1 Port No. 1 I have the Telekom PRI On E1 Port No. 2 I have an Alcatel PBX that cannot be changed So I have setup my asterisk between Alcatel and Telekom In extension.conf i configured: [telekom] exten => _9149.,1,Dial,ZAP/g2/${EXTEN}; exten => _9149.,2,Hangup This works great, all incoming calls are directly routed to alcatel

Hello, I have connected asterisk box with legacy PBX Alcatel OmniPCX 4400 (and also another * box connected to A4200). These PBXes have function to assign name to extensions and display it on phone. Asterisk box is connected via PRI with euroISDN signalling (also I have tried QSIG). Is it possible to set callerid with name and display it on alcatel digital phones? With command SetCALLERID

Hi all, Did anyone had success with Q.Sig on * 1.2, especially with Alcatel 4400 (which seems to only support Q.Sig) ? I am thinking about interconnecting 15 sites together with asterisk (probably using IAX or SIP). I have a very heterogeneous environement using both PRI and BRI, but my pilot will start with the Alcatel at the central site. Any help/example is most welcome. BR, - Patrick -

In the 'me too' vein, I also have an untested 3624 here on the shelf and am waiting on a shipment of T100 cards to play with. Documentation is very hard to come by. Alcatel are certainly the owners of the Mainstreet product line but, without a support contract, any documentation they may have is essentially unavailable as their per-incident fees for support cost more than most of the

Hello, I have a little problem with signalling. An E100p is connected to an Alcatel PBX, wich has an E1 to the outside. Located in Germany. zapata.conf: switchtype=euroisdn pridialplan=local prilocaldialplan=local overlapdial=yes signalling=pri_cpe .... With asterisk 1.0.2 I can call from a SIP phone to a phone connected to the Alcatel and the SIP number is correctly displayed at the caller.

Does anyone have any input into integrating asterisk with a alcatel 4400 PBX. Acording to what i've found is that Alcatel uses R2 for E1 -- regards Vikram (http://www.vicramresearch.com)

Hi, I've noticed that a small but meaningful quota of calls from my Alcatel PBX to Asterisk are failing. This does not always happen and it is not easily reproducible but on high traffic I do get a large number of cases. Example: Alcatel PBX extension 7085 calls Asterisk PBX extension 6145 over a PRI E1 link. I see this in the Asterisk log: Dec 14 14:10:31 VERBOSE[11378] logger.c: --

Hi guys, Recentlly i did a asterisk gateway and use it with an alcatel pabx. All is working, i have only two problems. 1. When call incomming to asterisk, it forward to digium card to PABX Alcatel. The user that start the call can't hear the control tone of ring ring ring. Tha calls stay without sound until the called part answer the call. At this point, conversation follow normaly. 2. When

Hi, I have this setup: E1 PRI PSTN -- Asterisk -- Alcatel PBX - analog phones Can someone tell me what's wrong with this call initiating from an analog phone connected to Alcatel PBX? It dies with NOANSWER but all works if I call other destination numbers. Dialplan is a simple Dial(zap/g1/0984465691) statement. At the end you'll find also zapata.conf.