similar to: 1.0 RC2 - FXS issues - no ring, no MWI

I'm proposing an asterisk configuration and considering the use of multiport SIP/FXS gateways (instead of T1 cards and channel banks). I'm looking for products similar in function to the Cisco ATA-186, but with more ports. I've seen the manufacturer's web pages for the Audiocodes MediaPack (http://www.audiocodes.com/) and the Mediatrix (http://www.mediatrix.com/) access devices.

I've tried searching the archives but come up empty. I'm looking for a "receptionist" application, that could be used in a business center. Lots of different incoming phone numbers (200+), all need to be answered in a different way, by a human. This is typically enabled with a terminal of some form that pops up the company and contact information for the called number, and a

All of a sudden I am getting the following warning "Ring/off-hook in strange state 6 on channel1" from chan_zap.c and I cannot answer calls. I can place calls out without a problem though. Any ideas what can be the problem. I have checked zapata.conf and zaptel.conf and they both seem fine. Thanks in advance. Dan -------------- next part -------------- An HTML attachment was

A while back I converted back to static conf files from a database setup. However I decided to tackle it again. The problem that I was experiencing, was, there was no stutter tone on my sipura 2000 or 3000 when there was a voicemail left at either extension when I was using mysql setup for peers and voicemail. I have 2 contexts... home, office in my voicemail configuration I now use

Using a TE410P with Zhone 24FXS channel banks to power standard analog phones I can't seem to find out if it's possible to support FSK or voltage type message waiting lamps. I don't want to use stutter dial tone because of the dramatic difference in per phone cost. TIA

May be I have fiddled too much with my sipura settings but I can't get it to give the stutter tone when there is a new voice mail waiting on the asterisk box. I can either get a stutter tone all the time or not at all. Anyone got this working. Thanks Chris

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

I need to setup MWI on a few Aastra 9112's. I've tried doing so in the web interface by setting "Explicit MWI Subscription" to true, but no lights, no stutter tone. Firmware: 1.4.0.1048 Thanks! -- Warm Regards, Lee

Hi, Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work fine. With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line polarity reversal. Stutter dialtone is generated as expected. Has anyone else seen this? Is there anything special I need to do for 1.6.1 to make FSK MWI work? Thanks, --Barry

Let post this question.. Because I must be real slow... The following is my config on this... group=1 context=default signalling=fxs_ks channel => 1 context=local signalling=fxo_ks callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no musiconhold=default usecallerid=yes

My grateful thanks to whoever can guide me in implementing this... I have a need to place calls via Asterisk Manager Protocol to a legacy PBX and twiddle its MWI lights. By some means I get notified that an MWI light has to be changed. Via AMP: 1. Send an ORIGINATE command honking up an incoming port on the PBX via a TA804. a. I presume that the TA804 should be a SIP channel. yes/no? b.

asterisk-users-request@lists.digium.com is believed to have said: >I don't mean to be rude to everyone who responded to this question, but >I think that everyone is answering the wrong question. The point is that >the message waiting indicator doesn't light up, at all, ever. All that >happens when messages are waiting is that the display blinks and the >phone gives a

I recently set up Asterisk with an Adtran TA750. All is well except the phones do not show the MWI. I have configured zapata.conf properly, as all phones will receive a stutter dial tone if there is a message waiting in it's assigned mailbox. Does anybody know how I might fix this problem? Thank you for your time __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free,

Hi all, Configuration: Analog phone connected to TDM400p. I'd like the phone to give a half-ring (chirp) periodically when there is a message waiting. Can this be done? How is it configured? The visible "Message waiting" indicator and the stutter dial tone are working fine, but are not sufficient for me. Thanks!

I have many remote locations that dial into a central server to retrieve voicemail via IAX. Outbound calls are handled as SIP calls from a Snom to a local (to them) Asterisk server that dials the main server thru IAX. I have trained them to check their voicemail via the emailed WAV file, however some of them are, how shall I put it, idiots*, and insist that they *have* to have the MWI indicator

I'm trying to get the Telco MWI recognition working in asterisk-1.6-beta7. I'm told that it's supposed to work provided my telco support FSK MWI signalling. I have Verzon FIOS. I believe I have FSK MWI signaling as I can hear the standard stutter tone when I pick up a live handset in front of my asterisk connection. I have the Verizon line attached to a TDM400 card, port 4. I

I am trying to set up the Message Waiting Indicator (stutter tone/light) so that my cisco ata-186 will let my phones know there is a message waiting. However this does not seem to be very well documented. I found this on wiki mailboxnumber@context ... where does that go? Do I put it in my SIP.conf definition for my cisco ata, or where. In my SIP cisco definition i already have a

Howdy I have a question regarding support for picking up when the telco sends a MWI message. My client's setup is a small office with three incoming lines on a TDM400P with iaxy's and a Grandstream as extensions. I am using CVS Head from yesterday. (I was resolving a different issue.) Since they only have two voice lines, with the third as a fax, I am using voicemail from the telco.

Sorry for the partial post a moment ago With help I got two phones communicating - PCMA/PCMU was the problem. Next stpe is to try voicemail. VM works fine, I can leave a mesage and then retrieve it - but no MWI on the phone and no stutter dialtone. I promise I've spent the requisite 4 hours + on google etc. but have really no further ideas. The setup is 2 Grandstream phones (latest

Anyone have suggestions for channel banks compatible with Trixbox that can set a MWI lamp on phones. We're a business, but have a lot of analog phones with the neon lamp on them and want to move them from a Mitel SX-200 to *. EKG