similar to: Differences in CDR files

Hi All, I have been running a environment with asterisk 1.4.20.1 for some time now with no issue but have recently added some extra functionality (enabled call recording via MixMonitor) and ran into some deadlock issues which seem to be well documented with earlier 1.4.x releases so have decided to take the plunge and upgrade. I decided to start testing with 1.6.2 but have run into a couple

Hi I have kind of an odd problem. When dialing in from an outside line via a TE410P card it seems like MusicOnHold and MP3Player doesn't work properly (for me anyway). The remote end which is calling * doesn't hear the music but just keeps ringing. But if I insert a Playback("file_which_dont_exist") just before the Moh or MP3Player I can hear the music. Actually I observed the

Hi all, I need 2 CDR Records of below 2 numbers for outgoing calls, detail is given as below: *96XXXXXXXX88XXXXXXXX* *=> Call file : outbound call generate through below file* Test.call ====== Channel: local/s at outgoing/n WaitTime: 45 Context: outgoing_ivrs Extension: s Priority: 1 Set: contact_no=96XXXXXXXX extensions.conf ============ [outgoing] exten => s,1,NoOP(----- First LEG

On Sat, 25 Apr 2015 17:11:34 +0200 jg <webaccounts173 at jgoettgens.de> wrote: > > > Hi All > > > > I have dozens of these messages on CLI complaining about database > > connection and error writing CDR to disk. > > > > The curious thing is I can find them all inside the database. > > I "selected" them using uniqueid and manually

Hello Asterisk-Users, For some reason my CDR records for disposition and billsec are not working correctly. I always receive a 0 for billsec and the disposition is always at "NO ANSWER', even when I grab the calls. I experience this with Asterisk 1.6.0.1 and Asterisk 1.4.22. Here is information on how I do the call: -----------------------------------------------------------------

Dear All, Situation (1) is SIP agent -> Asterisk TE410P -> Telcom Mobile System PRI debug Message type: (just hear about Mobile System VoiceMail IVR introduction, hangup before beep tone) Message type: SETUP (5) Message type: CALL PROCEEDING (2) Message type: ALERTING (1) Message type: DISCONNECT (69) Message type: RELEASE (77) Message type: RELEASE COMPLETE (90) GSM Mobile still

Can someone tell me what I am doing wrong? Why doesn't CDR(duration) or CDR(billsec) return the correct values? cdr.conf endbeforehexten=yes extensions.conf [macro-Dial] ; ${ARG1} - Dial String exten => s,1,Dial(${ARG1},,M(post-dial)) exten => h,1,NoOp(Call was hung up - ${CDR(duration)} seconds long, billed for ${CDR(billsec)} seconds) The log shows: -- Executing [h

Hi, all Sorry for null subject last mail. I use Ubuntu 12.04.01 TLS and install asterisk 11.7.0 (tar.gz downloaded from asterisk.org). We named it "Asterisk11". I want to generate a call file to /var/spool/asterisk/outgoing. This call will dial out to Local Channel and return to some Extens. Then Asterisk11 will generate a CDR records to MySQL's cdr table(in database

Hi there How do I change the dialplan runtime, if I for example wants all calls on the main number to be answered by a voicemail (when it is out-of-office hours). I want to be able to change the configuration by pressing a DTMF combination e.g. *82. Can't figure out whether it is necessary to change contexts or how to do it. I have read a lot of examples and config documentation, but I

Hello, I have problem with interpretation of CDR entries. What happened? ------------- There was: 1. at 09:00:26 we received call from unknown caller (no callerid) to secretary with extension 17 2. secretary answered and after some conversation called to extension 18 to check if she could transfer customer call 3. at 09:02:55 extension 18 answered and call was forwarded 4. call was very long

Dears, I need to save some information on userfield when calls end in Asterisk13, but I have two error cases: 1. With endbeforehexten=no in cdr.conf, I have a registry in cdr, but userfield is not set. 2. With endbeforehexten=yes, I have two lines in cdr, one with duration, src e dst correct, and a second line with userfield setting and dst h. I am using cdr_odbc.conf, with Asterisk11.14.0 it

Hi, Here is the scenario: Originating local channel using AMI. On answering the channel, it will goes to a context. Which start to playback a file. & after hangup at h extension I am caliing an agi script which insert CDR into DB. Now the problem is when I script hangsup during payback CDR(billsec) returns currect result. But when it hangsup after playback cdr(billsec) returns 0 . Please

Hello list, I'm having troubles implementing the ${CDR(duration)} & ${CDR(billsec)} variables in this scenario: PEER CALLS OUT -> CALL GOES TO PEER'S DEFAULT OUTGOING CONTEXT -> THE CALL IS SENT TO A MACRO AND GOES IN HANGUP -> THE CALL RETURNS TO EXTENSION h OF PEER'S DEFAULT OUTGOING CONTEXT (here I'm trying to print the variable)

Hello * users I've have a rather disturbing problem, which I don't know how to debug or how to solve, but first a brief description of the set up. One Asterisk server with a TE410P card installed (first line used on this only), and a number of Wellgate 3504A (4 port FXS devices with SIP firmware). There is no connection from the Asterisk server to the outside world or any other

Hello * users Sorry I forgot to send the mail in plain text the first time... I've have a rather disturbing problem, which I don't know how to debug or how to solve, but first a brief description of the set up. One Asterisk server with a TE410P card installed (first line used on this only), and a number of Wellgate 3504A (4 port FXS devices with SIP firmware). There is no connection

Hi I'm using asterisk 1.8.23.1 but I've seen this same issue in previous versions of 1.8. I have created some work arounds but the behaviour is incorrect. This is the scenario: Call comes in and goes to appropriate dialplan In the dialplan the call is forwarded to another number using a Local channel (and using /n ) e.g. Dial(Local/<my-number>@outbound-context/n,60) The number is

Hello, I have now been playing with Asterisk for about a week and absolutely love it! Unfortunately I seam to be having a problem with cdr records and mysql via the ODBC method It would appear to all be set up properly, and I am able to successfully. log inbound/outbound activity into my mysql cdr database. All the inserted values appear to be correct and meaningful but for the Duration

Both of our production asterisk servers are dumping core when making writes to our cdr tables. Here is a backtrace of the problems we are having: #0 0x00447b1f in tdserror (tds_ctx=0x1, tds=0xb7938c90, msgno=20004, errnum=9) at util.c:347 347 if (tds_ctx && tds_ctx->err_handler) { (gdb) bt #0 0x00447b1f in tdserror (tds_ctx=0x1, tds=0xb7938c90, msgno=20004, errnum=9) at

Hi people, when I try to get the billsec in the dialplan, it is 0... but if after that I check the database, it is right (not 0). I'm trying to get it in the h extension, like: exten => h,1,Noop(End) exten => h,n,Noop(Time is ${CDR(billsec)}) .... Is it updated after the extension h is executed? In that case, how can I get the call duration in the h extension? Thanks, Anahi

Hi, We are running asterisk 1.2.16 and need to connect two channels which are already established. We are currently using app_meetme to achieve that, but we are sometimes unhappy, as app_meetme provides functionality that produces load that we do not need in our two party conferences. I figured out that there is an alternative called app_changrab.