similar to: asterisk -r and -rx questions

I'm trying to use Jeremy's suggestion of dialling using just the peer name instead of user:pass@peer but I'm running into some really funky issues. It does the same thing with both VoicePulse and another * server I have. [voicepulse] type=peer host=gw5.voicepulse.com trunk=yes user=USERNAME pass=PASSWORD and in my dialplan: Dial(IAX2/voicepulse/${EXTEN:2}@VPWS,90,r) The log shows

In response to the postings by Andrew Kohlsmith and Ernest W. Lessenger: Andrew, I modified the exten line in extensions.conf as you suggested. Unfortunately, It still does not work... Ernest, I spent approx. 4 hours reading list archives (and anything else Google served up) on how to configure iax.conf and extensions.conf to work with Voicepulse. Then, I sent an email to voicepulse

I've been having 'gappy' audio problems with nufone for about a week now but I think I've nailed it down. Setup: office* - iax2 - colo* - iax2 - nufone office* and colo* are identical physical hardware (Xeon 2.8, dual ethernet, solely used for Asterisk) -- they are joined together through their second ethernet ports over a dedicated 2meg SDSL link. One hop between office* and

Hello. The procedure so that it works you can find in: http://www.voip-info.org/wiki-Convert+WAV+audio+files+for+use+in+Asteris k a the files .wav chmod 755 file.wav sox file.wav -r 8000 file.gsm resample -ql chmod 755 file.gsm in extensions.conf xxxx=> xxx,x,playback(file) Ing Javier Rios Ing de Proyectos 04167285748 212 2637246 /2637187 -----Original Message----- From:

Has anyone has issues with echo using a Wildcard with a PRI from a major Canadian Telco? (Bell, Telus, AllStream, Sprint, Group Telecom). We are using a T1 from GT that is giving use annoying echos whenever a SIP/IAX2 client calls a local analog line. Calling cells phones is no issue since its digital. Regardless, there should be no issue with echo on a PRI at all. NOC at GT is telling us

Hi all I been looking into the whole code strugture of chan_iax and i see there is a option to specify the refresh rate of registrations: But there is no code to actually load this from the config file thus i changed the setting in chan_so.h, and recompiled. But still my refresh rate is 60 sec. I need to get this down to 15 sec (nat /pat firewall issue) any ideas? thanks Liaan

Using Firefly 1.9.5 (thirdparty) on Win2k Using Asterisk CVS HEAD 20041117 (also tried with 20040806 and 200410-something) IAX2, no NAT. Firefly->Asterisk audio works, but I can't hear anything from the other side. Using GSM codec, also tried ulaw. Any ideas? -A. relevant bits of iax.conf: [andrew-bt] type=peer host=dynamic trunk=no [andrew-bt] type=user context=fxs secret=12345

At the moment we're not - the email notification from Comedian Mail has been mostly sufficient. I do however have some Dialogic D/42-NS PBX emulation cards and the plan is to use them to set and unset the MWI lamps based on events pushed out of Asterisk. They may be obsolete hardware but they came in real handy for extracting the voicemail from the old StarTalk NAM too. Take a look at the

> -----Original Message----- > From: Andrew Kohlsmith [mailto:akohlsmith-asterisk@benshaw.com] > Is the channel physically being hung up before the * tone is heard? Good question. If it is, Asterisk doesn't detect it -- the PBX doesn't support Kewlstart-style disconnect notification. The sequence I hear on the extension, when I plug in an analog phone, is the click of the

I've got this low-ping 100%-up dsl connection between two asterisk 1.2.7.1 servers. And oftentimes one of them would declare its opposite UNREACHABLE. Why can this happen? The host stanzas in iax.conf have raw IP's, so no DNS monkey business here.. An inquiring mind wants to know.

The problem: T100P connected to an Adit600. Channel 1-16 are FXS, 17-24 FXO. I have Zap/24 in callgroup 3 and Zap/1-16 in pickupgroup 3. When a call comes in on Zap/24 I cannot pick it up with *8 from Zap/1-16. *CLI> show version Asterisk CVS-04/27/04-23:48:08 built by root@tuck on a i686 running Linux The zapata.conf and extensions.conf are located here:

Hi: I use shared internet bandwidth and the calls are very clear from around midnight till about 4 pm when it goes bad after that. Is there a way to boost the internet bandwidth for Asterisk at the peak time? Thanks Discover Yahoo! Have fun online with music videos, cool games, IM and more. Check it out! http://discover.yahoo.com/online.html

The answer is yes, I think, but I don't recall precisely how off the top of my head, and I'm walking out the door in a moment. The phone will hold more than a dozen distinct ring tones which you can create for yourself, and you can have asterisk direct it to use a ring tone independently of line appearance. The most direct way would be with the SIP Alert-Info field, but the phone itself

Hello - I have (finally) obtained a fair amount of success in connecting my Intertel Axxess PBX to an asterisk box via a T1 PRI. I can place calls from the Intertel side through the T1, out to an IAX2 softphone and the calls get routed correctly and all of the CID information stays intact. However, when I call from the IAX side to an extension which should route back through to the Intertel

I'm trying to set up asterisk so any phone connected to channel 1-16 of my Adit600 channel bank can pick up a call coming in on channel 24. I do not wish to ring any of the 16 channels on an incoming call -- this is strictly so I can pick up the line if I see it ringing and wish to answer at work. I have channel 24 in call group 3, and channels 1-16 in pickup groups 1 and 3. However

Hello all. I've been attempting to utilize the "survival" pkg ( http://cran.r-project.org/web/packages/survival/index.html), while reading through this guide (http://www.ms.uky.edu/~mai/Rsurv.pdf). I figured working through the guide would be the best way to go, before attempting my own data. I tried to utilize the Kaplain-Meier estimator as shown in the guide:

> -----Original Message----- > From: Andrew Kohlsmith [mailto:akohlsmith-asterisk@benshaw.com] > Sent: Tuesday, 25 November, 2003 08:56 > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Picking a channel (FXO port or SIP) for outbound calls > > > > Yep, we use it for international calling. Works great: > > exten =>

Hey, Thanks for the input Andrew. I did all you suggested but noticed that when I did the loopback test, the output *was not* there as you mentioned ("I'm set to pri_net, but the other side thinks it is pri_net!"). In fact, the same message as before kept repeating every second or so: >> Unnumbered frame: >> SAPI: 00 C/R: 0 EA: 0 >> TEI: 000 EA: 1

At 1/16/04 7:25 AM, Andrew Kohlsmith <akohlsmith-asterisk@benshaw.com> wrote: >That's pure bullshit -- I use software RAID *specifically* because I value >my data. I don't want to buy two hardaware RAID controllers to have one >sit on the shelf just in case the first dies... and if the second dies >you're SOL because they've lasted long enough that

On Friday, June 10, 2005 3:16 AM, Andrew Kohlsmith [SMTP:akohlsmith-asterisk@benshaw.com] wrote: > On Friday 10 June 2005 04:08, Terry H. Gilsenan wrote: > > Received: from source ([81.56.129.44]) by exprod5mx8.postini.com > > ([64.18.4.10]) with SMTP; Fri, 10 Jun 2005 00:29:16 PDT > > > > Your MTA claimed it was called "SOURCE" but rDNS tells the recipient