similar to: oem x100p undefined symbol ast_get_txt

I upgraded to the latest HEAD version of asterisk, and all IAX calls started sounding choppy. It was suggested on the IRC channel that I go back to asterisk -stable to determine if that fixes it. Is downgrading as simple as upgrading? Because now, -stable builds fine, but I get an error on the asterisk console when starting, something about "ast_get_txt" not found. Recompiling and

I've just installed a Digitnetworks X100P clone in my * server and run the install script for the voicepet-single-x100p tarball. The install appeared to run OK with modprobe wcfxo successful and the ztcfg reporting "Channel 01: FXS Kewlstart (Default) (Slaves: 01)". When I try to start * though I get a segmentation fault after loading res_features.so. I discovered that the

i installed Asterisk on linux FC3 box and i was able to make third party calls from voipjet. I then installed an X100P from digitnetworks and i was able to execute modprobe zaptel and modprobe wcfxo and i had to add some lines to the file: 50-udev.rules before i was able to perform ztcfg without errors. I had no problems running Asterisk before i installed X100P, but this is not the case now.

Hi, I've experiencing this kind of problem. Actually, my asterisk is running perfectly. I've tested it, and I called some computer in my LAN. Then I enter the CLI and entered these commands - show modules - modules status (or so.. I forget) - restart now After I enter the last command, the CLI is exiting and nothing happened. Then I try to run the asterisk with command - asterisk But

Hello! Asterisk "CVS-HEAD-08/06/04-14:55:13" won't start on two of three different Gentoo machines. This is the output of gdb: ultra asterisk # gdb /usr/sbin/asterisk GNU gdb 6.0 Copyright 2003 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions.

Hello, I got a pair of DigiNetwork X100P FXO cards. The packet has a installation with suggest to install ' voicepet ' package. Is it really required for setting up asterisk PBX ? I am slightly confused. Anybody knows why they ask to install that package ? Please guide ? Thanks Varun

Hi, Ive been struggling with asterisk for a few days now. I understand pretty much how it works and how to tie things together (SIP -> SIP internally works fine etc), but just cannot get asterisk to work with an X100P clone (its a Ambient MD3200, if that means anything to you guys). I have tried (initially) asterisk 1.07 with zaptel 1.07, and now Asterisk CVS-HEAD with zaptel cvs. Both give

Dear Duane: Thanks for the steer (presently I route calls to 1800 via iaxtel, but I'll turn that off for that test) I came up with a thought for an interesting e164 service last night - distributed custom ringtones, and custom announcements on a callerid lookup via enum. You'd be able to embed a RINGTONE - an url pointing to either a ringtone definition or a wav file that contains

Dear ALL, Any clues or tips for the following gdb messages. [root@localhost asterisk]# uname -a Linux localhost 2.4.22-1.2115.nptlsmp #1 SMP Wed Oct 29 15:30:09 EST 2003 i686 i686 i386 GNU/Linux localhost*CLI> show version Asterisk CVS-HEAD-09/22/04-11:19:09 built by root@localhost on a i686 running Linux [root@localhost asterisk]# gdb asterisk core.13089 GNU gdb Red Hat Linux

I used: cvs checkout zaptel libpri asterisk asterisk-addons asterisk-sounds iaxyprov astcc and in the same order I try to compile it. Asterisk ends with the lines below. It complains of a newer libpri, but I just did it a step before! What do I miss? chan_zap.c:62:2: #error "You need newer libpri" chan_zap.c:128: error: parse error before '<<' token chan_zap.c:133:1:

Good evening, I am just getting started with Asterisk. I have it installed, and I believe I am on the right track, overall, to get it working, but I can't get the linejack to answer any calls. At this point, all I'm trying to do is have Asterisk answer an inbound call on my linejack, /dev/phone0, and play a greeting or tone. I figure, once I am able to get asterisk to actually answer the

Hi, I've been having a little problem with my asterisk servers, I have 4 identical asterisk servers setup (same hardware, same OS, same config). Once in a while (once or twice a day) one of the server crashes on the cron job reload. But I realized this only happens on 3 of the 4 servers. Tried to spot the difference between that one server that wasn't crashing. The difference I found was

Boy oh boy. This blows. I upgraded to 1.2.2 from 1.0.9, and of course had the timebomb bug. Immediately after upgrading to 1.2.3 we were ok, for 24 hours or so. Since upgrading to 1.2.3, though, the whole system has locked up twice. Once on Thursday, and then about a half hour ago. The server would reply to a ping, but no ssh login, no local console login - just locked up. This ain't good for

Hi, I've purchased two x100p clones, and when I try accessing a line from asterisk with something like this: exten => _1NXXNXXXXXX,1,Dial(Zap/2/{$EXTEN}) (is that only supposed to put you on channel 2 or actually dial the # for you?) but I first hear noise, then a dial tone, but as soon as I start dialing numbers I get feedback and noise, and the call doesn't go through. Any

From http://www.syslinux.org/wiki/index.php/Comboot/menu.c32 *** QUOTE - BEGIN *** MENU BEGIN [tagname] MENU END Begin/end a submenu. The entries between MENU BEGIN and MENU END form a submenu, which is marked with a > mark on the right hand of the screen. Submenus inherit the properties of their parent menus, but can override them, and can thus have their own

I am trying to create submenus, or more specifically a single submenu, using PXELINUX and the menu.c32. I have a tftp share with a basic config: / (root of tftp) pxelinux.0 menu.c32 /diskdiag (dir) /diskdiag/dskdiag.0 /pxelinux.cfg (dir) /pxelinux.cfg/default /pxelinux.cfg/dskdiag one of the menu items in /pxelinux.cfg/default is as follows: LABEL DISKDIAG MENU LABEL [^B] Disk Diagnostics

Hello Folks, I'm trying to decide here between a few cards for connecting an Asterisk box to a single E1 channel (either PRI or R2 signaling): - Digium E100P: has been replaced by the TE110P below, but can still be had at places like digitnetworks.com for $475, and I guess there's always a place for good-olde-obsolete cards in the world as long as they work :-) - Digium TE110P:

Package: xen-utils-4.0 Version: 4.0.1-5.2 Severity: important Tags: upstream patch pygrub in Debian Squueze does not support Grub2 submenus. At least Ubuntu Precise uses a submenu for older kernel versions, so a Precise domU with more than one kernel installed will be unbootable (without manual fixes) on a Squeeze dom0. Attached is a patch that adds submenu support to pygrub. -- System

Bugs item #16519, was opened at 2007-12-22 18:14 You can respond by visiting: http://rubyforge.org/tracker/?func=detail&atid=218&aid=16519&group_id=35 Category: Incorrect behavior Group: current Status: Open Resolution: None Priority: 5 Submitted By: Alex Fenton (brokentoy) Assigned to: Alex Fenton (brokentoy) Summary: crash with Submenus - need GC protection Initial Comment: With

Hi: I had an fxo card from Digitnetworks and it was working fine on my Asterisk box. I then replaced it with TDM04B. I changed the zaptel and zapata to include the four channels. When I run ztcfg, I get configuration errors: Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: