similar to: RE: Zaptel X100P Kernel Panic

Hi, I know this seems to be a hit topic at the moment but no matter where I look I can't find an answer. I have got a simple Linux fedora core 2 installation, asterisk running and 2 X100Ps' and 1 TDM400 with the FXS modules (thou I've taking this out to simplify things). Sometimes and not always after hanging up on the Zap channel the box will do a kernel panic, or just loading

Hi can you help ? I have been trying to compile the zaptel modules all day for installation with out success, see messages below.... Setup as follows X100P card Intel Celeron (686) 1.7ghz processor Redhat Fedora Core 2 (Linux-2.6.5-1.358) When I do the make I get the following errors Any comments would be great ====> make make -C /usr/src/linux-2.6.5-1.358 SUBDIRS=/asterisk/zaptel-0.9.1

List members, Is it possible to record outbound analog calls using an X100P? I was asked if I knew how to record all calls for a shop with 4 analog phones transparently to the end users. I thought Asterisk was a good fit for this and I envisioned using either Digium TDM400Ps or Sangoma A200s with 4 FXO and 4 FXS modules. The FXO modules would be connected to the existing PBX and the FXS

Thanks for the reply Bill. I am aware of the interrupts problem. To solve it I have already disabled my serial ports freeing up interrupts 3 and 4 and these are allocated to the two cards. This was done 2 months ago and has not solved the problem. Is there any way that something can wake up every now and then and generate these two interrupts? My current /proc/interrupts is as follows:

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

Hi Most of the threads in the list archive relating to X100P and hangups are about not detecting hangups. We have got the opposite problem. We have experienced an increased number of false hangups when connecting an X100P to an analog port of an ISDN terminal adapter. It happens more frequently on incoming calls than it does on outgoing calls. Often hangups occur after about 3-4 minutes into the

Hello List, Im just dipping my feet into the asterisk world, and im having major fxo problems Im running Asterisk (from svn) + libpri (from svn) + asterisk-addons (from svn) + asterisk gui (svn 1.4 branch) + zaptel (svn 1.4) on a Debian Etch box, with 1gb ram, running all of the services for my home server (web / db / music server etc), and i would like to run my PSTN line from Kingston Comms,

I have two grandstream budtetone-100 and cisco 7960g phones. When I talk via speaker phone on either of the phones I get a lot of echo. Any suggestions? Also how do I turn on the mark echo canceller. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of asterisk-users-request@lists.digium.com Sent: Tuesday, April 13,

Hello folks, I'm very interested in the Digium/Asterisk combination but need some clarification. I would like to setup a SOHO for business and home use. Scenario One: I have one analog line, 4 analog telephones. Do I need a TDM400P + 4 FXS modules (Green) + X100P? Scenario Two: 2 analog lines, 1 selective ring number for fax, 8 analog phones. Is this what I need? 2 TDM400Ps and 8 FXS

I am interested in running asterisks and gno phone. However, i have yet to purchase the x100p cards. Is there a way for me to test asterisks in like a simulated mode or something? (to get used to it and the configs and stuff, prior to purchasing the x100ps?) Thanks all, A.J.

Hi list! I have been experiencing a lot of mystical hangs on my box. At first I suspected bad memory or motherboard but I found out that the mystical hangs disappear when I do not load the drivers for my x100p. The box will only hang under high load (copy operations with 30Mb/sec to a raid array in the box for example). With little or no load the box will stay up forever. (The imposed load

I am finding that with the combination above, the zap channel will hang up, though the call has hung up. I am make all changes in my zapata.conf file that I can find on the internet with nothing fixing this issue. I have added busydetect=yes, busycount=6, and made sure that the signalling is set for fxs_ks these setting worked fine with zaptel 1.2 but not with the newest zaptel drivers.

Just wondering if anyone knows if a X100P/Clone would work on say a Sun Ultra 10 running Gentoo linux for sparc...? I've seen on voip-info.org that it won't run on solaris sparc, but nothing mentions gentoo(linux)/sparc...?

Good news! FYI, worked with Mark this afternoon to test changes needed to reduce or eliminate echo involving pstn calls on the new tdm fxo card (bug #1902). Three simple source code changes (testing-only at this point) resulted in zero detectable echo on all incoming and outgoing tdm pstn calls, even in the first second or two. I've not noticed any unusual side effects at all. Since the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm experiencing frequent kernel panics when using the X100P card under the 2.6.6 Fedora kernel. I've attached the kernel output to this message - - it looks like the IRQ stack is overflowing and trashing some memory, causing a series of oopses followed by a complete crash. I have just hacked the kernel to reenable 8k stacks and will see

Hi, I had been using 4 X100P cards in my Asterisk box, but 2 of them were sharing an interrupt. Therefore, periodically I would hear beeps and clicks that I had assumed were a result of this. So, I ordered a TDM400P with 4 FXO modules and installed it in the box last night. Today, we've had nothing but problems with it dropping calls. I installed the latest CVS of everything, and we've

Greetings all, I've just put two X100P cards to my box and despite trying everything I can find on the web, I can't get the second one to work. I've edited /etc/modules.conf so that ztcfg doesn't run automatically. To start, I run: /sbin/modprobe zaptel /sbin/modprobe wcfxo /sbin/ztcfg /sbin/modprobe ixj and ztcfg says: ZT_CHANCONFIG failed on channel 2: No such device or

I was told the X100P will have issues if installed on a line with a DSL connection. Is there a card that will work correctly on a DSL connection? Thanks!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/6de6226b/attachment.htm

This must be a question asked before but can't find it so here I go: I have a Asterisk box connected, thou a x100p, to a PSTN PBX. When we get a incomming call on that PBX the phones in the office wil ring and there will also be a ring signal on the x100p. At my current configuration the call wil be answered by the Asterisk box. Is it possible to configure Asterisk to not answer the line

I am using 2 X100P clone cards in my asterisk system, and have one phone line plugged into the 'line' port of each card. On one of the cards, I also have a cable plugged into the 'phone' port and this cable is then connected to the modem on my PC so that I can use it for dial-up. I thought that this would then allow me to do dial-up and at the same time it would lock the port so