similar to: Avaya/Lucent Definity -> Asterisk interop question

Hello, We want to make H323 calls between asterisk and avaya(lucent) pbx. We create node-name,H.323 signaling group,trunk, but we can not make H.323 calls to asterisk. Also no warnings exist in debug. Instead of giving the IP of Asterisk ,i give my computer's IP and run SJPhone ith H.323 GUI. In this time, connection is established. SJPhone accepts H323 calls but Asterisk does not. Do

Yes, I can make a call on that extension from other definity phone, if you mean it. -----Original Message----- From: Ken Godee [mailto:ken@perfect-image.com] Sent: 30 ÉÀÌÑ 2004 Ç. 19:14 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Connecting Asterisk and Avaya Definity By E1. Incoming work, but not outgoing Roman Bessyadovskii wrote: > Hi All. > > I connect

Hi All. I connect asterisk and definity by manual at www.voip-info.org/tiki-index.php?page=Asterisk%20Avaya. (I just only have E1, not T1 card). I see, that card work (in definity trunk status, and at asterisk == D-Channel on span 1 up -- B-channel 1 successfully restarted on span 1 -- B-channel 2 successfully restarted on span 1 -- B-channel 3 successfully restarted on span 1

Has anyone tried to replace Witness or Nice recorder with asterisk. I saw a nice article on voip-info.org on how to replace voicemail server for Avaya Definity with asterisk. The idea behind is to record not only the external channels but also extension to extension (three way calling for which the third leg is asterisk PRI will do) Any suggestion will highly help Sam -------------- next part

We have had quite a bit of success with our T100P and TE410P cards interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3 using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in 5ESS mode). In the near future, I may also need to interface to a Definity via a T1. I was planning to use PRI--is that an option for you on your switch? -----Original

This is my first post, so please feel free to direct me to another list if needed. I am in the early stages of researching Asterisk. I administer a small Avaya Definity G3 switch (~400 users). Can anyone point my to resources/documents/actual implementation notes of using Asterisk's voicemail with an Avaya Definity switch? Many thanks, Brian Hudson --------------

Hi everyone, We have been working with Asterisk for a while now and would really like to expand its capabilities by fully integrating it with our Definity g3si and are wondering about other peoples experiences with similar setups. Thus far we have only been able to achieve a partial 1 way integration, but ultimately would love to route inbound voip calls to the asterisk out of the lucent.

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the

I am tasked with linking an Avaya Definity switch to an asterisk box using it's IP card that handles H.323. All my googles turn up a lot of results but nothing recent. I am able to find instructions but they are dated from 2005, and often fail halfway through. What is the best way to achieve what I want, which is two way calling between the Avaya switch and Asterisk server using h.323, and

Hi all, I am new to asterisk, but experienced with Linux and Avaya/Lucent G3R hardware/software. We currently have a large inventory of spare Lucent 64XX phone sets. I'm considering setting up an asterisk system for a remote office, and would like to use the Lucent sets because they are cheap, and familiar to my end users. Does anyone know of a card that can drive these sets? I think

Hi there I remember to ask this question in the past but now I have thought of something little bit difference. While I understand that asterisk dialplan accept the call to be answered[ Answer() ] in the dialplan, I wanna know if this is possible; i. A call on legacy PBX, extension to extension is made. ii. On call bridging, the legacy PBX initiate a third bridging to the recording system via an

We're setting up a connection with Level3's voip system and when we use Asterisk or make or recv calls we get an initial pulsing noise. Level3's Interop team explains that's their RTP extension headers and Asterisk apparently doesn't know what to do with it. He said we need to either ignore or of course let the traffic pass. Has anyone heard of this before? I understand the

We have setup asterisk to handle our calls before between telco and an Avaya definity. The PRI keeps locking up every so often. In addition I keep getting this error when trying to call the avaya: -- Channel 0/2, span 1 got hangup request, cause 102 -- Hungup 'Zap/2-1' When that error happens I get a fast busy (congestion) tone. Any one can point me in the right direction? TIA

Hi Everyone, So I have been further exploring the integration of our asterisk server and our lucent definity g3si system. I took the suggestion of setting up an isdn-pri line added the two way tie trunk and the signalling group, but can't seem to get the PRI signalling working on the asterisk correctly. I've set pri type to network on the lucent, and pri_cpe in zapata on the asterisk, but

Does anyone know if avaya voip product is running linux under the hood? Thanks, /glen -- Glen Ford gford@idiom.com

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

I am hoping someone could shed some light and point me in the right direction? I'm attempting to get callerid work between an Avaya Definity PBX and Asterisk via TE110P connected via T1/PRI Crossover PRI. From the Definity side I've searched endlessly and came with an example which we modeled as close as we can, but still no luck. While doing PRI intense debug span 1 in I see a couple

Hi everybody, I've connected Asterisk 1.2.5 (libpri 1.2.2, zaptel 1.2.4, Linux 2.6.13.2) to an Avaya-Tenovis PBX via a PRI/E1-line. Calls from SIP-phones via * to the PBX work fine. However, incoming calls to * only result in: -- XXX Missing handling for mandatory IE 24 (cs0, Channel Identification) XXX -- which seems to be an * problem, because a Windows-fax-machine works fine on a PRI

Hey everybody, I've just spent the last two hours Googling and searching the Wiki. I'm trying to find if there are any listings of codes for the Avaya Definity G3R, to allow for an Asterisk system to turn on/off a phones MWI that is attached to a G3. We are looking to use an Asterisk system as a voice mail server. I'm not having any luck, anybody have such information? Thanks,

Does Asterisk work with Lucent or any other PBX phone systems????