similar to: Asterisk+zaphfc: how to answer incoming calls from a BRI (EuroISDN)?

Displaying 20 results from an estimated 1000 matches similar to: "Asterisk+zaphfc: how to answer incoming calls from a BRI (EuroISDN)?"

2004 Jul 26
6
Can't dial SIP<->EuroISDN (HFC-S based PCI ISDN card): Unable to create channel of type 'Zap'
Hi, I'm trying to set up an Asterisk pbx based on a Fedora Core 1 Linux box (customized kernel version 2.4.24). I want calls from my SIP soft-phones to simply be dumped onto the PSTN line via a BRI (EuroISDN). I have a cheap HFC-S based PCI ISDN card connected to the NT1+ interface, so I need zaphfc. I've read everything I've found at www.voip-info.org, then I've downloaded the
2005 Aug 21
2
Asterisk 1.0.9 on SuSE 9.2 with ISDN BRI & zaphfc?
I would like to know how to install asterisk 1.0.9 with zaphfc working on a SuSE 9.2. I tried this: - The rpms with SuSE 9.2 are asterisk 1.0.6 - bristuff works, except for zaphfc, which doesn't compile. - The official asterisk download file doesn't contain isdn bri support Any ideas? Lars Dybdahl.
2005 Jul 16
1
Multiple ISDN BRI Units with Asterisk using Bristuff zaphfc in NT mode?
Maybe this is rather a hardware question, but I am posting it on this list because the probability of someone else of you having tried this is greater here than other places I can think of. I have an ISDN card that is setup in NT mode using the zaphfc driver in bristuff, and I got it working perfectly with one ISDN phone using a crossover cable and 100 ohm termination at the end of the cable.
2004 Dec 22
0
RE Zaphfc/BRI Configuration help
Hi Muhammad From: "Muhammad Talha" <talha@worldcall.net.pk> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Wednesday, December 22, 2004 2:07 PM Subject: Re: [Asterisk-Users] Zaphfc/BRI Configuration help > Thanks for lan for your reply can you share your extention.conf > setting . > >
2005 Jan 20
0
is it possible to use Zaphfc (BRI) exactly like i4l?
HI I.m working on echo on my asterisk and I'm wonder if is it possible to use Zaphfc (BRI) exactly like i4l? How to attach msn number to such card? Thanks in advance for any help. Regards, Corvin
2004 Jun 07
1
Zaphfc and BRI problems in Portugal...
Hi - Anyone using zaphfc cards (bri-stuff-0.0.2) on a Portugal Telecom BRI service? I am getting loads of errors and the audio is very distorted all the time. System is a Dell PIII/933 MHZ with SCSI. Here in the UK we have perfect audio with a Compaq PIII/500 MHZ SCSI system. Files are identical in both systems as below: Is there anything magic about Portuguese ISDN? The PCI bus in the
2005 Jul 16
3
Multiple ISDN BRI Units with Asterisk usingBristuff zaphfc in NT mode?
-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zoltan Szecsei Sent: zaterdag 16 juli 2005 12:54 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Multiple ISDN BRI Units with Asterisk usingBristuff zaphfc in NT mode? >> Maybe this is rather a hardware question,
2004 Dec 19
1
BRI Error with zaphfc
Hi I have a small ISDN PABX , (BRI) at home - Siemens Gigaset 4175 which has cordless DECT extensions. I have set up asterisk on FC3 with two HFC cards and I am using the latest bristuff. I am trying to use * between my ISDN line and my PABX. One card is in TE mode and can receive and make calls OK. I can make and receive external calls to a SIP phone. I cannot get the other card to talk to my
2005 Feb 12
1
What quad/octo BRI cards are best/stable for EuroISDN and Asterisk ?
Hi, I'm currently deciding on what card to pruchase for octo/quad BRI card to use with Asterisk on EuroISDN lines. I'm aware of at least two options (Junghanns or Beronet), but don't know how stable and well supported they are. Which ones are better supported ? Any experiences? Any advice ? How tos ? What would you buy ? Thanks in advance, Regards, Rob.
2004 May 18
0
zaphfc Compile Error
Hi Running slackware 9.1 with compiled kernel patched to 2.6.6 running ok. Having problems compiling zaphfc.c First thing was the can't find "irq_vectors.h", but "solved" by changing the #include "irq_vectors.h" to #include "mach-default/irq_vectors.h" in /usr/src/linux/include/asm/ directory. But I still have errors with "structure has no
2004 Apr 28
0
Zaphfc random problem
How i can log to understand where is my problem Sometimes zaphfc hang my nt1 plus with that error zaphfc: empty HDLC frame received. zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames exceeded! zaphfc: dchan tx fifo total number of frames
2005 Aug 18
1
Zaphfc.ko module error
Hi Guys I have been running a test server for a few days now with * 1.0.9 bristuff RC8n. I had a power failure and the test machine was not on the ups. When power was restored I found the following error: FATAL: Error inserting zaphfc (/lib/modules/2.6.11.4-20a-default/misc/zaphfc.ko): Unknown symbol in module, or unknown parameter (see dmesg) My dmesg output: zaphfc: unsupported
2004 Nov 30
0
AW: zaphfc problem
Hi, I solved the Problem: the context defined in zaptel.conf: context = zapincoming was not in extensions.conf, so nothing worked. ( I assumend this context is only necessary for calls from zaptel, not to it) This may be a bug: in the verbose log I found nothing like "[chan_zap] Could not initialize ..., due to ....", this had helped alot and had saved alot of hours (-;
2004 Jun 16
3
ZAPHFC - only for * 0.7.2?
I've got Zaphfc working running Asterisk v. 0.7.2 Then I have tried with Asterisk V. 1.0 and the latest from CVS - with no succes. Has anybody got zaphfc working with newer version than 0.7.2 ? NR -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040616/32481fca/attachment.htm
2006 Nov 16
1
zaptel, bristuff zaphfc, and florz question
Hi, We've been using zaphfc single ISDN cards as cheap Zaptel timing sources for our Asterisk boxes for a long time, and in the asterisk 1.0.x series, had zero problems doing so. I now have some boxes with Zaptel 1.2.x (with a mixture of 1.0.x asterisk and 1.2.x asterisk), and this setup no-longer seems stable - By plugging or unplugging the ISDN cable, and sometimes just randomly the card
2005 May 04
0
hfc isdn cards & zaphfc in domU
Hello, After searching the archives, I''ve found only two messages regarding this case, but there were no solution. I have a similar problem, so I try to ask here. I have twi HFC chipset ISDN cards in my pc: 0000:00:0d.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Subsystem: Cologne Chip Designs GmbH ISDN Board Flags: bus
2005 Jun 10
1
Call inband progress indication and zaphfc
Hello all, I've a little clue with zaphfc used to connect to a BRI linethat probably can be a configuration issue.... (really I hope so) Here, telcos (expecially mobile operators) use to substitute the dialtone with some vocal indication without answer the line. (Indications like "The customer is not reachable" or "wait because the customer is on the phone" ecc..) For
2005 Aug 08
2
zaphfc syslog flooding
Hi, my zaphfc is flooding my syslog with two messages (even without asterisk running). Is this "normal"?: -------------------------------------------------- zaphfc: bchan rx fifo not enough bytes to receive! (z1=1360, z2=1353, wanted 8 got 7), probably a buffer overrun. zaphfc: dropped audio (z1=2712, z2=2695, wanted 8 got 17, dropped 9). With Asterisk running (asterisk -vvvvvgc)
2004 Apr 27
0
Zaphfc unable to configure (ZT_CHANCONFIG failed)
Hi, I'm tring to setup a ISDN HFC card in NT mode, but I have a problem with ztcfg that always report a problem regarding FXS/FXO signaling. Is someone have ever seen this ? Loadind the zaphfc module seems ok.... -- insmod ./zaphfc.o modes=1 ------------ zaphfc: card configured at mem 0xc89eee00 fifo 0xc29e8000(0x29e8000) IRQ 19 HZ 100 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci
2005 Aug 03
1
Is it possible to use CHAN_CAPI with ZAPHFC enabled card ?
I have an ISDN card, Billion ISDN PCI Card I tried to use the ZAPHFC, I patched the kernel, I did anything (also followed reccomandation on use on Suse Linux Professional 9.2 --my box is) using bristuff last version. In the end I succesfully compile zaphfc, but I am not able to use the card (a lot of problem running zapcfg, a loto of problem starting asterisk saying about wrong anything (from