similar to: chan_sccp2 testers needed

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Can someone provide example configuration files and/or instructions for configuring Asterisk to work with chan_sccp2 and a 7960. I have the searched the chan_sccp2 site, the voip_info wiki site, asterisk doc project, and mailing list archives for the past year for help, but failed to find anything helpful. Some of the questions I have are: 1. What settings need to be made on the phone? 2.

Hi again, I found chan_skinny and that seems to work pretty good. the SCCP one filled out all the buttons really nice, but skinny seems to be working. How do I fill out the second line button on the phone with skinny.conf? Thanks much! ...Jeff

Hi all, we are happy to announce the new test-release of chan_sccp. The Cisco 7920 support is working now, however, some call handling stuff is hardcoded for testing. Also some more in-deep-knowledge of Skinny was archieved, how they handle calls. Please test it with your 7940/7960 and 30VIP and report any problems using our bug tracking tool. The latest tarball is available at:

Hi All, have some decent success on the 7920 "activation" in Asterisk. Latest status: chan_skinny does NOT work with 7920 chan_sccp does WORK with 7920 (!!) however: to remove coredumping the chan_sccp just comment out the MWI (messagewaitingindicator), then it compiles fine. Then change sccp_helper.c: return "P0060302" instead of the old value. and voila: Phone is

I am trying to use chan_skinny but when loading the module I get: [ Booting....../usr/lib/asterisk/modules/chan_skinny.so: undefined symbol: ast_pickup_call I am using CVS 07/23 I can't get chan_sccp2 to compile, it gives me parse errors, or I'd be using that. :-/

Hi, the last 2 days i was working on getting the 7920 Phones to work with Skinny & Asterisk; however no luck (yet). Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for me ? it should be documented at the cisco page, but it isn't :-( I still have the issue that the 7920 spits out "No Service - IP Config failed" but Asterisk is giving me sign that the

> ata1: port is slow to respond, this delay is known to occur on vacant SATA ports > ata1: port failed to respond (30 secs) > ata1: SRST failed (status 0xFF) > ata1: SRST failed (err_mask=0x100) > ata1: softreset failed, retrying in 5 secs > ata1: SRST failed (status 0xFF) > ata1: SRST failed (err_mask=0x100) > ata1: softreset failed, retrying in 5 secs > ata1: SRST

Hi all, I installed CentOS 5 on DELL machine. Then, When the system comes up, I always get below erros. Could you pls help me to solve this out before I setup this box for productiuon use ? these are errors. usb 1-2: device not accepting address 2, error -71 ata2: port failed to respond (30 secs) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: SRST failed (status

We are currently moving away from a wide-spread Cisco CallManager deployment to Asterisk. For many of our small sites we have the routers configured for what Cisco calls SRST so if we have a WAN failure, the router acts as a SCCP registrar. We are converting to SIP, and from what I can tell Cisco wants a license for each router to run SRST over SIP... So my question to the group is: What are

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hello, I found serveral discussions about the Zyxel ePhone Prestige P2000W and the WiSip from Pulver Innovations on this mailings list but still have some questions: 1) are there other affordable wireless SIP Phones on the market? I haven't seen or found anything else till now ... 2) is p2000w and wisip the same hardware?? so could I use firmware from both companies regardless of what

I have a Cisco 7960 running 7.2 of their SCCP image; I am running Asterisk 1.0.5 and using the latest Sourceforge version of SCCP2. When I make a call (or receive one) the "Transfer" softkey does not show up - as a matter of fact only 2 softkeys show up (redial & something else), but those even are not active. On a 7960 running SIP the Transfer and other buttons do show up and are

Hi I have 2 asterisk servers running 1.2.12.1 and IAX2 with trunking and no jitterbuffer. Both servers are using sccp2 with 7940's and 7960's with 7914. Server 1 is my main VOIP server and is connected to the pstn and VOIP wholesale provider. Sever 2 is a branch site and all calls go to server 1. If I make 1 call on server 2 everything is fine. If I make a 2nd call so there a two calls

I'm having a wierd problem with a Cisco 7960 (sccp2) and asterisk (1.4.2) If the call that I'm trying to make goes through, everything works fine. But if there's any sort of error (like me messing around in my extensions.conf, etc). I can't get the connection to drop. ie: If I get the conjestion tone and hang up the phone, I can do a sccp show channels I can see that the

I could use some skinny/Cisco help here. Was finally able to get the phone registered to * but whenever someone tries to call that phone it freezes and reboots itself. Same thing happens when you pick the handset up off the 7960G; it locks and reboots about 5 sec later. Here is what * shows when I plug the phone in: -- Starting Skinny session from 64.72.107.1 Device SEP000F3442E4A7 is

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

I''m trying to pass my SATA controller through to a domain and have run into a weird situation. I have two machines with the same general class of hardware (Intel PIIX) and the pass-through works on one machine but not the other. On the non-working system, the SATA controller makes port reads, but they don''t return the correct values. For example, when running it in dom0, when

Hi, I just got some interesting information from Kirk Telecom (www.kirktelecom.com). This company has been in the business of providing DECT solutions (IP gateway, base stations, repeaters and handsets) either to be used with Cisco CallManager (SCCP protocol) or with the Innovaphone IP PBX system (H.323). Two important elements: 1. It seems they foresee a SIP version of their product in Q1

Hi, I have an asterisk running great, with 2 cisco 7912 phones converted to SIP, and a cisco 2600 xl w/ E1 and SIP. I?m thinking to expand the test adding more 7912, but I prefer not convert all the 7912 to SIP, so I?m tying to put CHAN_SCCP to work. I?ve get the sources from cvs.sourceforge.net but when I try to compile, get the followings errors: [root@asterisk01 chan_sccp]# make Now