similar to: Zultys Zip 4x4

Does anyone on-list use the Zultys 4x4 or 4x5 ip phones? I'd like to hear some opinion before I buy a few. I'm especially interested in the PSTN interface on the 4x5. Does it relay to * for VM when an incomming call is not answered by the phone? Thanks, Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist

Hi All, A friend has asked me to get a new Zultys 4x5 working with his * server. I've been over the web gui but don't see where all the registration info gets entered in the phone. Is there someone on-list who has Zultys phones and can advise me as to their setup? The manufacturers docs are useless. Thanks, Michael -- Michael Graves mgraves@pixelpower.com Sr.

Good Day List, I have my asterisk box setup to be an ntp server, and my zultys 4X4 phone is able to get the time, however I must first select the TimeZone Offset and then it will use the time setting from my server. This is a hassle because every time the phone reboots the user must answer this question and as you can imagine End users do not know what to do and since the phone is not

Anyone had experience with this phone? The interesting features that caught my eye were the RTP encryption, speaker "pager", and built in 4-port ethernet switch. Of course, RTP encryption doesn't exist in * yet, but it might be interesting (I've had people ask about it, but I don't know how serious they are about needing it.) http://www.zip4x4.com/summary_ZIP4x4.htm

I'm trying to get a Zultys Zip 2 phone working with Asterisk. The phone seems to be failing registration (see sip debug output below). However, I can place calls TO the Zip2 from other SIP phones (Grandstream BT-101, Xten X-Lite, and eStara Softphone) and from Nortel PBX extensions coming in to Asterisk over a PRI T1. The problem is that I cannot dial any extensions from the Zip 2. Any

Hi peoples Can anyone tell me if the Zultys Zip 4x5 supports iax protocols or if they have configured one before for iax. If you have a sample config file that would be great. Any assistance would be nice Scott -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050811/6c243053/attachment.htm

I have my first Zultys here but can't seem to get to first base. Does anyone have a basic configuration file they might share? Mine is a Zip 2+. If I understand the Zultys User Manual, the default passwd should be a null string--but the web interface isn't accepting that (nor 'admin' nor a couple others). Anyone know what the default passwd actually is? Thanks for any and all

Hi All, Does anyone on-list have experience with the Zultys 4x4 and 4x5 phones with AES encryption? Does this work well with *? I imagine that it would work as long as * doesn't have to decode the stream. What are the implications for calls going to voicemail or MeetMe? I'd pondering installing the 4x5, especially if Zultys can make the on-board FXO port available to * as well as a

Hello, all How can I write sound file with external G723.1 codec ( actually I have CISCO that can make H323 call to Asterisk box with G723.1 or G729 codec ) I am trying to start Record application by specifying in extensions.conf [writesound] exten => s,1, Answer exten => s,2,Record(soundexample:g723sf) or ...... ( soundexample:g729) I'am using oh323 channel driver, in oh323.conf

I got a Uniden UIP200 and started to configure it and I am lost.... I have a tftp server setup on my * server and have the files unidencom.txt and uniden<mac>.txt there. But it doesn't quite work yet. It registers as a sip phone (sip show peers), but I cann't dial it and the display shows #1 disconnected all the time. It has firmware version BS4.59a in it. I have no idea if I

Hi all, i don't know how often someone ask for this, but i ask agian: Is it possible to use G723.1 with * or not ? I tried to use G723.1 from * over OH323 to a gatekeeper from my provider. The situation is following: Zap/analog ---> IAX -----INTERNET-----IAX--->OH323---->GATEKEEPER/PROVIDER The provider supports G723.1. Can someone help me ? Regards, Thomas.

Hi all, I need to test the following scenario: +-----------+ +-----------+ | asterisk 1| | asterisk 2| +-----------+ +-----------+ | | | | _______|__________________|___________ | | | | | | +-------+ +-------+ | ATA 1 |

I am trying to use asterisk as transcoder between voipswitch 2.0 and gsm gateway. Voipswitch supports g723.1 but gsm gateway does not. Now I have g723.1 codec in my asterisk. call leg from voipswitch is using codec g723.1 and call leg from gsm gateway is using codec gsm. I am having one way audio and getting below mentioned warning. Asterisk version is 1.8.11.0 [Jun 2 17:08:28] WARNING[21652]:

Hi, I cannot get SIP channel working with folowing codec configuration: [sip] disallow=all allow=g723.1 ;I need this codec between sip phones (BT100) allow=ilbc ;Use this codec to others Calling between BT100 SIP phones is OK - asterisk makes native bridge (with g723.1) between them. When I'm calling from SIP to other channel (iax,zap,...), asterisk is not able to chose right codec

Hi, I am calling from a grandstream phone with g723 codec through * to iconnect. Incoming context as well as outgoing context set to g723.1 codec in *. Call get connected and I can talk. However I get the following warning, which scrolls on my screen until I hang-up. [root@asterisk sath]# cat g723.1 - Executing SetCallerID("SIP/-08122ae0", "1001") in new stack --

Hi, I try to use Speex codec into Win32 platforms. However, I find the CPU bandwidth usage is very heavy on a Pentium 3 machine. Compare to Microsoft's G723.1 codec, speex 8k is using more than 20% cpu bandwidth. Does anyone know what is the best version of Speex to "beat" the Microsoft's G723.1's on CPU bandwidth usage? Does Speex have MMX-enabled codes? thanks very

Samba is trying to be a member server in an AD in native mode, using winbind, nss, and kerberose. There are 3 kdc's (2 are Win2003, 1 is Win2000), samba server is RH-AS3 + Samba version 3.0.9 (from samba.org) + krb5 1.3.1-6 (from Fedora Core). I thought I had things working (join succeeded, could access shares, modify files), and then it stopped working. After clearing out the host account

Hello, I am Ruijie Fang, a GSoC student working on "Improve hot cold splitting to aggressively outline small blocks." Over the course of last week, I met with my mentor and co-mentor, Aditya Kumar, and Rodrigo Rocha, and we made a preliminary plan on improving the existing hot/cold splitting pass in LLVM through identifying patterns of cold blocks in real-world workloads via block

I am trying to get a new Asterisk installation running using a Zultys ZIP2 phone and a Uniden 200 phone. I have the system working reasonably well (although probably not optimal) except for a couple of items. First, I can't get the voice mail message light to work on the Zultys phone but it works just fine on the Uniden phone. Second, the time presented on the Uniden UIP200 phone is 1 hour

Hi all, I have found the solution for getting Zultys handsets to accept paging messages. We need an app to send RTP packets with a codec of G711U to send to port 3771 on multicast dest of 224.0.0.1. There isn't any need to use SDP or SCCP packets to inform the phone to "listen" for those packets, they do it by default. Finally we may be able to get a solution going for Zultys