similar to: Asterisk to CCM

Hi all, I have Asterisk talking to my call manager 4.0 with SIP trunk as mentioned in the wiki. I also have SER talking to Asterisk. I need the SER talking to my Call manager. The reason why CCM cannot talk to SER is because SER is a on a public ip address, and CCM is on a private ip address. The asterisk how ever has 2 nics, which talks to both and external. Is it possible to allow

I have my server configured to send to send all PSTN traffic to my Cisco AS5300 gateway via SIP. I use the following line in the extensions.conf file to accomplish this: exten => _NXXNXXXXXX,1,Dial(SIP/1${EXTEN}@10.1.1.1,240,T) Unfortunately, when I removed the T from the end of the statement, the calls still complete, but they drop as soon as the called party answers the phone. I thought

Hi, Is anyone using mozPhone? If so any feedback you can provide? Thanks, Glenn

Hi, I was able to work out SIP trunk between Asterisk and CCM 4.x without any issues. Whereas SIP trunk in CCM 5.x is not working with Asterisk. Asterisk is sending OPTIONS messages to CCM 5.x for which CCM is not replying. For the same reason Asterisk is marking it as UNREACHABLE. Anybody got Asterisk and CCM 5.x intergation working. How can I fix the problem which I'm facing with CCM 5.x?

Hello, My problem is, outgoing calls (from asterisk to CCM) work fine but incoming (from CCM to Asterisk) does not work because of CCM is trying to use g729 over SIP trunk. I have found that link after a quick search. Problem is the same as in link below (However my Asterisk version is 1.8.13) and solution seems to have H323 trunk between CCM and Asterisk for using g729 codec. The post was

Hi, I have the following config: [7960] <--skinny--> [Cisco CCM] <--SIP_trunk--> [asterisk] <--SIP--> [X-lite] Is there a chance to avoid the RTP stream from passing through the Cisco CCM ? I would like to have all RTP handled by the *. This is just a testbed, for a larger project. What I want to achieve, is actually this: [Cisco Phone] <--skinny--> [Cisco CCM]

Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1, Asterisk is running strictly VoIP over the network and using CCM as the trunk. Calls from the SIP phones connected to Asterisk work fine. They can call both external numbers and any Cisco extensions attached to CCM. Calls from CCM to Asterisk fail without any notification in Asterisk (and I DID have this working at one

Hi, I've got a CCM ( Cisco Call Manager ), with a Cisco Unity VM server and about 45 SCCP phones on the ccm, and 200 users on unity. we want to migrate all users to IP Phones to ditch our ancient phone system. I would love to get Linksys-Sipura SPA-941s for the 150 users not on IP phones yet and run sip to an asterisk server, but have their voicemail on Unity. these phones are $150 each,

Okay, another Cisco related issue (sorry!). Single Asterisk box at location 1. Single Cisco box at location 2, however the Cisco is also the PBX for location 3 (same physical machine, calls routed via VoIP). Trying to have Asterisk be able to call EITHER Call Manager location. The single SIP trunk in CCM (version 6.1 mind you) only allows a single device pool to be selected. So configuring calls

Hi, I have used basic Asterisk as a PBX controlling few extensions. My question is simple, at work there is an existing Call Manager/PBX and all which manages all the extensions for SCCP VOIP phones. Can Asterisk be used to manage just 1 VOIP phone and still can make internal calls to the other extensions? Thanks, Jorge -------------- next part -------------- An

Hi All, I'm just posting this questions to both forums as its related to both. In hope to get some help on below issue: Asterisk 1.4.x CCM = 4.x CME = 4.x codec = g711ulaw Here is my setup: 600X Phones ----> Asterisk ---- SIP Trunk ----> Call Manager -----> CME -----> 461X Phones 461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones so in

Hi List, I have a system that connects into Asterisk 1.4.41 using CISCO CCM 7. Everything works great except when a call is transferred to the operator. The call goes to the operator via a native bridge and is completed, then a "phantom process" starts and tries to launch a new call every 15 minutes. I modified the dialplan to hangup these phantom calls, but no still

Hi I have found in http://lists.digium.com/pipermail/asterisk-users/2004-July/056111.html (Hack to make * -> (H323) -> CCM -> IOS GW work) that i need a special version of chan_h323, because of the External RTP problem. Do you know exactly which version is it? Or do i need an unofficial patch? Thanx Andr?s

Hello, I can use directed call pickup using pickup application (between sip, iax, skinny cals), but unable to pickup call that is ringing on phone behind h323 gateway (using original h323 channel in asterisk), is this even suported? thx PJ exten => _*7.,1,Pickup(${EXTEN:2}) console log, when trying o pickup ringing line 324 (h323), from skinny phone (953) -- Executing

Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages

The hack below is for OpenH323, not Asterisk. This is not an Asterisk problem AFAICT. I am posting it here so that any other Asterisk user with a similar problem might benefit from it. I may or may not post it to an OpenH323 list, but since both variants of the H.323 channel in Asterisk use non-current OpenH323 versions, it may not be of any benefit to anyone anytime soon if I went that route!

Hello there, Does anybody has already get asterisk to work with R2 E1s ? If so, what version combination have you used, between asterisk, libmfcr2 and unicall ? I've already compiled asterisk 1.0.9 patched against some unicall versions (0.0.3pre4 and 0.0.2[a,b,c]), after some code adaptations, but it stops right after an ioctl. Unicall verion 0.0.3pre4 doesn't even have the Makefile

I have the voicemail setup working in that I get the MWI and it emails the message correctly. When I pressed the MWI button on my SNOM 200, it dials into the voicemail system and prompts me for a mailbox and password. I know there is a way to automatically connect directly into the mailbox via the extension.conf file, but I can not find the documentation I am looking for in reference to variables

Hello everyone Is there someone planning to work on adding to Polly the techniques described in "The polyhedral model is more widely applicable than you think" to increase the coverage of the polyhedral model? I'm not familiar with Polly, but this would involve modifying its front-end and the code generator right? Any idea of how difficult this would be? Thanks! -Arnaldo

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco