similar to: Upgrade from Altigen

I would like to integrate * with an existing Altigen PBX. I want to spend as little money as possible to make it happen. My main goal is to inexpensively connect a branch office to the phone system. Eventually I would like to replace the Altigen system with an Asterisk server so I don't want to spend any money on Altigen hardware. Currently the Altigen has analog interfaces with a couple

Has anyone got Asterisk talking successfully to an Altigen PBX using h323? I can successfully make calls from Asterisk to Altigen, but calls from Altigen to Asterisk get a fast busy. There seems to be a lack of h323 example files (or maybe I'm looking in the wrong places) as well as a severe lack of h323 documentation from Altigen. Any pointers would be greatly appreciated.

I am attempting to establish SIP peering between Asterisk and an AltiGen soft PBX. This is my first experience with SIP peering. I can successfully make both inbound and outbound calls to/from a softphone on the AltiGen system (network access is provided by a PRI on the Asterisk system), but they are disconnected unexpectedly. The attachment is a redirect of the Asterisk CLI during a call that

ok guys I have a PHP GUI that will be great for both of you. direct editor to the whole file intact OR click to go to an extension. I will post a link to it tomorrow morning... as soon as I can get it off my production server HEHE.... it can do CRC checks on the *.cnf files and it will allow you to edit and parse out for you all your config entries with complex cnf files and default sample

I've tried timing faxes two ways:

Greetings All- I have an * box with the NuFone H.323 channel driver installed. I also have an Altigen VoIP system with a PRI to the PSTN. I can sucessfully make a call from a SIP extension (snom190) to an H.323 extension (altigen phone) The thing I can't seem to make work is a call from a H.323 phone to a SIP extension. Here's the layout:

Can anyone clue me in about these T400 T1 cards I see advertised? I hear they are Digium Clones. Is there some reason to avoid these? How do they compare to TE410P's for example. Bart

Hi, Does anybody know of a VoIP compatible doorbell or door intercom unit? I've contemplated buying a cheap SIP phone, ripping it apart, and putting it inside an IP66 sealed unit... It would need: - At least one speed-dial key, or some way to make every button dial the same extension number - PoE (power over ethernet), so I can power it off the central switch - cheap enough to rip apart

I'm attempting to do a first-time Asterisk install at home, firstly for use by my self and my family, and secondly as a learning experience. I've got a new house, and the previous owners removed all but one (1) phone jack. So I figured I might as well build a PBX. Functional goals include station-to-station calling, rudimentary auto attendant/voice mail, and perhaps tieing into the

The TDM01B is 4 port capable but has only 1 FXO module. I'm running asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B working. When I do the zttool it shows 4/1/0. I can dial out from a POTS phone up to the point that the cable plugs into the card. Here is my /etc/zaptel.conf loadzone=us fxsks=1 and here is my /etc/Zapata.conf [channels] language=en #include

I know a few ppl have those CAC Adit 600's with t400 I can't seem to get my second span up on the T400 connected to the second spand on the adit (A:2) A:1 seems ok Can someone post they zaptel.conf span defintions And maybe a "print config" from the adit 600 cli I think my issue is timing srcs the coding, framing. bld out are all matched thx -------------- next part

Hi guys, I wanted to fetch some info from webpage and use it in my db. I read hpricot is one way to do it. But the problem is I''m unable to use it with my app. For some reason after successfully installing hpricot it fails when I try to use it in the rails console. I''ve been trying to fix this for the last four-five days. I''m stumped ! I tried re-installing everything

Hello, I have been retained by a Building Management Company to install a combined Voice/Data solution for a Tennated Office Space. This space will rent offices, with telephone and internet service to inviduals or small groups of individuals. As fate would have it, the service will be provided in a building where we have a major Pop, with a DS-3 worth of ISDN PRI circuits, 345 megs of

Hello Everyone, My company is about to deploy * as replacement for our existing commercial Altigen PBX. Meanwhile, I've been trying to find the best cost effective SIP VoIP phone which we can use in office for 20-30 employees, as well as a few remote staff. Normally I wouldn't post about a VoIP phone, however, this phone was released less than a week so I thought I'd give some

Hello my brothers and sisters, Is "X100P" card suitable to VoIP? and if "yes", am i need to only "X100P" and "Asterisk" Package? or i need also to other cards or packages? and if "X100P" card not suitable to VoIP, please recommend a another card, (please take in your account that i would like to connect standard analog line to the card

Hi Folks, Does anybody have experiences with plugging 3 TDM400P cards in one PC?? I think about a Asterisk box handling 8 incoming analogue lines and providing 4 lines to an old analogue PBX. I read a lot about trouble with the TDM400P cards so this idea seams to be not really god, or? Ciao Joerg -- _____________________ Don't PANIC

Hey Folks....I am on the 1.2 branch with the latest from Subversion. I've been having a rough go for the last several months integrating asterisk with out Altigen system. I can get calls inward just fine. I have zero missed interrupts on the digium 110p card. I have zero frame slips according to both sides. Outgoing calls sometimes work, but more often than not I get the following: --

I've been digging around with some cisco engineers for about a week & I finally got an encouraging response to the Auto-Answer issue with the SIP Phones. Here is their reply: =============== == FROM CISCO == =============== Auto-Answer feature is introduced in SIP IP Phone 6.0 version. This software version is expected to be available for customers shortly. Please let me know if you

I have heard rumblings about the new kernel for 4.4 A change was made to the kernel for disk I/O to make it better/faster. I havnt heard/seen anything about what that really translates to. Any thoughts/opinions on this. jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Has anybody had any problems getting digium hardware lately? Regards Greg Cirino ___________________________________ Cirelle Enterprises Inc. 603-425-2221 www.cirelle.com Website Design www.cirelle.net ProSpeed High Speed Dial-up - 5 Times Faster www.cedata.com Web, FTP, Email Hosting Services www.mlsbot.com MLS IDX Services When You Want It Done Well, Just Call Cirelle It's not just a