similar to: IAX2 to IAX2...i'm obviously an idiot!!

Hi I've taken apart a 7960 to fit a backlight to the LCD. Would others on the list be interested in this as a project when I've finished (i.e. should I document and photo all the stages)? Also I can source some 7960's at a very good price but what are the rules about posting this information on the list if others were interested? P

Hi there, do I have a local problem, or is registration at IAXTEL impossible at the moment? "iax2 show registry" permanently shows a TIMEOUT for 69.73.19.178. Philipp

Hi Guys Sorry, I've been away for a few days. As the backlight is an iterative process I thought I'd get some feedback before I move to the next stage:- The colour of the backlight:- I think blue would work best? On/Off Status, I've put some thought into this and think the light should come on in the following circumstances:- Phone Rings Phone handset is picked up Speaker

Hello everyone.... Searching the archives and google always comes up with entries regarding the "dyn" dns option in the 7960, but I can't find answers to my specific question.... My 7960 is connected via cable modem and is NAT'ed (everything is working fine). On the 7960 under SIP configuration\NAT Address I have the public IP of my cable connection. Comcast gives me a

Hi Can anyone with distinctive ring on their 7960's possibly post how they've got it to work? I understand that the ALERT_INFO variable is involved but using the examples for the variable value from the WiKi I'm just getting an error message from the Asterisk concole. Thanks in advance. P

I'm trying to spec out hardware for a new office, and I'd like to include power over Ethernet as an option. I've seen a handful of PoE injectors around $1000 for 24 ports and a couple switches up around $2500 for 24 ports. Are there any cheaper options, short of buying a boatload of 1-port injectors off of ebay? I don't really need more then 24 ports of PoE out of 48 total

Help, I'm stuck. Lost in the woods. I have one Asterisk running on FreeBSD outside on the Wild Internet. One on the safe inside, behind a NAT firewall. The inside server registers with IAX to the outer one and can place calls. The outside one can't register to the one on the inside, since it can't be reached on the private network. Now to my problem: * How do I dial from outside to

I have set up entries in /etc/hosts.allow and /etc/hosts.deny as follows: /etc/hosts.allow sendmail : 10.0.0.0/255.0.0.0 sendmail : LOCAL /etc/hosts.deny sendmail : ALL When I try to connect to port 25 from an Internet host via telnet, the server still responds as usual. The only difference I see is this in my /var/log/maillog: Apr 24 15:41:49 server sendmail[20691]: m3OKfna20691: tcpwrappers

On 2020-04-22 10:45, Aki Tuomi wrote: > You can also try running doveadm sync by hand. > doveadm -Dv sync -u victim tcp:otherserver:port what doeveconf config makes that command line work ?

Hi Perhaps people with more logic/electrical knowledge then I could address this....

Greetings all, Has anyone managed to get dialplan status hints working across multiple servers? I've separated a load of SIP users out across 2 servers today, but it'd be useful if they could still see each others' status. I've replaced the various hint lines for the sip devices now on another box with: exten => 210,hint,IAX2/otherserver/210 Where 210 is defined on the other

I've the following installation : |asterisk client| --- > |asterisk server| --- > |other asterisk server| all the connections are made in IAX, the client and first server allows 711 and 729 the other server only allows 729 since it has low bandwidth at disposal all the numbers but a few are routed to a digium card in the first server, the others are routed to the other server, this

Inline reply. On Fri, May 3, 2019 at 3:08 AM Rowland Penny via samba < samba at lists.samba.org> wrote: > On Thu, 2 May 2019 16:51:02 -0400 > James Fowler <fowlerj at adst.org> wrote: > > See inline comments > > > root at DC2:~# cat /etc/resolv.conf > > # Dynamic resolv.conf(5) file for glibc resolver(3) generated by > > resolvconf(8) > > # and

Hi there I am using an IAX2 softphone built from the IaxClient library dialing into Meetme conferences. The IaxClient seems to use silence suppression, and not sure if this can be disabled. The client works fine through most routers, but for some it disconnects the client after about 5 minutes and gives this error in the asterisk logs: Chan_iax2.c:1480 attempt_transmit: Max retries exceeded to

Hi All Total noob on the list so all help appreciated.... I've successfully installed Asterisk on an IBM A30P Thinkpad using fedora Core 2 (I'm looking at having a mobile PBX for conferences and shows). I've plugged in two Cisco 7960 phones.... The phones register with the Asterisk correctly and I can run the demo's and even the AIX demo through to digium works correctly.......

root at DC2:~# cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # and managed by Zentyal. # # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN # nameserver 192.168.1.254 #search domain1.domain /etc/hostname cat /etc/hostname DC2 /etc/hosts root at DC2:~cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 127.0.1.1

Hi We've recently set up and are using with success 1.0.7 using a Junghanns quadbri card to BRI ISDN, and Firefly with IAX2 protocol as softphones Works very well, however we're getting cases where sometimes the call just drops. >From setting more verbose modes we get a log which is shown below. The problem seems to be the maxretries message which comes from chan_iax2. We are using

Hi, I have a strange problem with a domain member server. The Samba3 domain master/wins server can not lookup the host. Workstations that are trying to connect to the server appear to be having trouble finding it (network path not found). nmblookup problemserver querying problemserver on 192.168.0.255 name_query failed to find name problemserver rigel:/var/lib/samba# nmblookup otherserver

Hai James, An other question, is exchange installed in the windows environment? If not thats only good. Ok you need some rewriting some parts i see several things you need to fix. I'll comment below. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > James Fowler via samba > Verzonden: donderdag 2 mei 2019

Just wondering if anyone has tried MAC OS X and panther. I will like to do SIP to H323, not sure if this will be possible on the MAC because of the Libraries PWlib and OPenh32 for Linux.. Just curious.. Anyway, anyone has an easy guide (step by step) to setup oh323 with asterisk. I saw a guide but i am not very savy on linux. thanks, Francisco ----- Original Message ----- From: