similar to: Nortel SL1 protocol and *?

The last post I saw regarding this was June 2003 (before my time with *, I started in September): http://lists.digium.com/pipermail/asterisk-users/2003-June/013324.html Is there any support for Q.SIG in * at all? The Norstar MICS uses a MCDN (Meridian Customer Defined Network) key to enable the "SL1" protocol which from everything I've been reading is just Q.SIG. This protocol

I am looking at setting up the following configuration and any help/input/comments before signing the PRI contracts will be greatly appreciated. PRI Tampa PRI Sarasota PRI <--> Nortel BCM-->Asterisk<------------------>Asterisk<---> I would like to link the Nortel BCM to * using the a digital trunk card. The BCM will

Hi, Looking through the source code, I see two functions in the 'libpri' code for message-waiting: pri_mwi_activate, and pri_mwi_deactivate, but they are not used by anything anywhere. Is there a sample application somewhere which makes use of these functions? I believe that the ISDN MWI is used when a Norstar MICS has an external voicemail provider. I don't know exactly how this

I have a couple of questions I'm hoping folks can help me out with. When I search the mailing list, I see folks doing what I'm interested in so here's hoping ! - How are people making out with interfacing to the 7960? I'm considering buying a number of these as they look quite feature rich. But, are they easy to interface to? - Will I be able to interface with softkeys on

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

Guys, I need to make asterisk connect to another device over a pri using QSIG signalling (master/slave). Is this feasible and has it been done before? Thank you! al. _________________________________________________________________ Get ready for school! Find articles, homework help and more in the Back to School Guide! http://special.msn.com/network/04backtoschool.armx

This is a new Samba config that has not yet worked. I have installed sernet-samba 4.1.14. [root at sltltfsee samba]# rpm -qa | grep sernet sernet-samba-libsmbclient0-4.1.14-10.el6.x86_64 sernet-samba-common-4.1.14-10.el6.x86_64 sernet-samba-4.1.14-10.el6.x86_64 sernet-samba-libs-4.1.14-10.el6.x86_64 sernet-samba-winbind-4.1.14-10.el6.x86_64 sernet-samba-client-4.1.14-10.el6.x86_64 I have been

Hello, I am wondering if anyone is using the Nortel 2001 2002 or 2004 phones on their asterisk implementation. My local dealer says they are not compatible with any open source implementations. Is there a phone compatibility list somewhere? Cheers Cian

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings, While I've seen this referred to a lot of places, I haven't yet found a posted solution that works for me. Testing has been done from a Mac running OSX 10.5.8 Here's what I have so far: if anyone can give me a next step to test, I'd appreciate it. If anyone can give me a complete solution, I'd appreciate it even

What models? Jeff Noxon (jeff-asterisk at planetfall.com) wrote*: > >I just purchased a bunch of Nortel Meridian POTS phones that support >intercom on the 3rd pair. I intend to get it working with Asterisk. >The phones support MWI, have a 3-line display, callerID, call waiting >callerID, 2 lines...very nice. > >On Thu, Feb 27, 2003 at 01:07:19AM -1000, James H. Thompson

We've been trying unsuccessfully to connect our Meridian Option 81C to a TE110P via PRI. We've followed the directions in asterisk-meridian-a1.pdf (link on http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it doesn't seem to work on our 81C (even though many, many users report it works very well on Option 11's). Has anyone had any success in getting the above

Hi. I had successful confiured my Asterix PBX, but now I need to connect it to a Nortel Meridian phone plant, I got a Digium T100P on the machine I got the Asterisk and I already connect it with the phone plant, I need to know what configuration do I have to do so the ip extensions can make calls to the extensions of my plant Nortel. And extensions from the Nortel plant can call ip extensions of

dd if=/dev/zero of=sl1 bs=512 count=256000 dd if=/dev/zero of=sl2 bs=512 count=256000 dd if=/dev/zero of=sl3 bs=512 count=256000 dd if=/dev/zero of=sl4 bs=512 count=256000 zpool create -m /export/test1 test1 raidz /export/sl1 /export/sl2 /export/sl3 zpool add -f test1 /export/sl4 dd if=/dev/zero of=sl4 bs=512 count=256000 zpool scrub test1 panic. and message like on image. This message posted

Hi, I have asterisk running a single T1 card with a connection to a nortel CS 1000. All calls to extensions, local and long distance are working just fine. My issue is this: The nortel CS 1000 supports connections to and intercom system that is just line level audio to speakers. When my PRI tries to call this "extension" it is never answered so my AGI never runs to play a message

Unfortunatly no on both counts. The arrangement right now has: PSTN Trunks & Stations <-> Nortel Norstar#1 <-CT1-> Asterisk#1 <-IAX2-> Asterisk#2 <-CT1-> Nortel Nortstar#2 <-> Stations The Asterisk boxes provide Voicemail to their sites Norstars and intersite calls over IAX. Local Voicemail works flawlessly at each site but there have been reports of PSTN calls

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've searched the mailing list quite extensively, but didn't come up with anything promising (some things wer helpful, though). Does anyone know if Nortel M Series (specifically the 2008, 2616, 7208, and 7310) phones can be made to work with the TDM400P card or if they are ADSI compatible at all? I kind of doubt they will work if they are

We have a client with a Nortel PBX with digital phone sets. Due to T1 problems (old firmware), we are interested in trying a FXO channel bank. Is there a channel bank (or equivalent) which emulates Meridian digital phone sets? In order words, an FXO channel bank that's Meridian digital? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello guys, Is there a decent click-to-dial CTI which works well with Asterisk? We have vanilla asterisk implementation and I have tried a few (ADA, Outcall etc) but they have poor documentation and don't work very well. We are looking for an application which can allow us to dial a number from Outlook and IE/Firefox for outbound calls and get a pop-up for inbound calls with call history