similar to: Cisco 7960 SIP V6 and distinctive ring.

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

I am wondering if there are any tricks getting the Cisco ATAs to do "distinctive rings" via the ALERT_INFO variable? I have seen some contradictory information in the Wiki, and I tried the example there. I then sniffed the connection between the server and the ATA and didn't see the header sent like it is "supposed" to be. If someone out there has a handle on this and

Hi All, I am running into a problem setting the ringtones via _ALERT_INFO on the Cisco 7960 phone. I am using * 1.2.1 and have tried setting the variable to several values. I have also tried setting the phone's software to both 7.5 and 8.2 thinking that it might be a version issue, but with no success. I have examined the packets and do see the ALERT_INFO header being sent, but the

I am trying to get distinctive ringing going again with these phones, depending on the outside line the call comes in on. I had a working 1.0.x Asterisk setup using: SetVar(ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) Which used the short quick rings. In Asterisk 1.4, I have tried several things, but I think the correct syntax is: Set(_ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) But

Hello, I've got my dialplan configured to do a double ring when a customer service call comes in, and a normal ring when an extension is dialed directly. When a customer service call is transferred, I want to ring to revert back to normal. In the local extension macro, I have the following ; make sure ring is set to default exten => s,n,NoOp(${ALERT_INFO}) exten =>

Hi Everyone, I've been asked to determine which phones our organization should go with. And I've narrowed it down to the Polycom IP500 or the Cisco 7940. From my travels through google, it's hard to find a definitive comparison of the two phones. So I thought I would ask the people that have probably used both. From what I can tell, the only major benefit the Cisco has over the

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone

I am trying to have the ring types different for internal and external incoming calls. I have followed the guide on the wiki, the SetVar executes, in extensions.conf I have it as s,1, Yet it doesn't work? When the phone rings, the ring type is the one I chose on the phone, it rings same tone for both when I test. Using Asterisk Stable. Anyone got this working and can

I've done the unspeakable. I took a working setup of 1.0.5 and upgraded with the latest cvs. with 1.0.5 distinctive ring worked great. with the latest cvs, it doesn't seem to work with my sipura 2000 (the only thing i have to test it with). I can see in console that its sending the info, but its not working? i realize the likely hood is I messed something up somehow during checkout or

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

Hello All, I am looking for a way to do priority call ringing. That is when a caller places a call to another party, they can indicate that the call is a priority and get a different ring to occur (ring cadence) on the called parties phone. This would be synonymous to an intercom ring on a key system. After some investigation, I have come across the ability of the GS BT101 which will ring

>Another option is Aastra's Ring Selectors. They can "split" a line into >multiple lines by ring cadence. > >http://www.aastra.com/Products/RingSelectors/index.html Don't you then have to wait 4 rings b4 an extension will get a * dial ? This devices must wait 2 rings to detect the cadence then * is gonna wait 2 rings trying to get CallerID which I think it will NEVER

Hi, I'm using asterisk 1.2.1 on a debian sarge distro. I've followed notes in http://www.voip-info.org/wiki/view/Polycom+auto-answer+config and http://www.voip-info.org/wiki/index.php?page=OptiPoint+600+SIP+-+Distictive+ring+using+ALERT_INFO but I still cannot change ring style via asterisk using exten => 666,1,SipAddHeader(ALERT_INFO="ring3") in extensions.conf . Is it

I use the following macro for my extensions. It only works with Zap channels and assumes that any Caller*ID number that is 4 digits is an internal call and all other calls are external calls. Use like this: exten => 1234,1,Macro(std-exten,Zap/4,20) [macro-std-exten] ; ; Caller*ID is 4 digits (internal call) ; exten => s/_XXXX,1,Dial(${ARG1}r2,${ARG2}) exten =>

This post is simply documenting a spouse-friendly way of using the spa-3000 as both a fxs and fxo port for basic soho environments in the US, allowing asterisk to participate as needed/wanted. All home phones are connected _only_ to the spa-3000 fxs port. The incoming home pstn line is connected _only_ to the spa-3000 fxo port. Defined Line 1 (fxs) to register with asterisk via sip (extn

Does anyone know of a way to setup distinctive ring in * for a Grandstream BT 101? I'm attempting to setup a way for users to distinguish between external and internal calls. I've tried ALERT_INFO with no success. Thanks, Mason Herring Director of Engineering Delta Signal, LLC -------------- next part -------------- An HTML attachment was scrubbed... URL:

A call comes in I set the distinctive ring by setting variable ALERT_INFO then dial a SIP channel. The channel is answered, but then the user forwards the call to another SIP channel. ALERT_INFO is still set. How can I clear the ALERT_INFO variable after the SIP channel is answered so that when the call is forwarded the ring goes back to "normal"?