similar to: SIP to H323 call timeout

Hi, does anyone have the setup for go2call ? I have digium boards and quicknet linejacks and phonejacks. The cards work fine in asterisk without the g729 or g723.1 for the phonejack. I will like to do SIP origination using the codec in the phonejack and linejack g729 or g723 and send the calls to go2call. Anyone has the setup for this ? Or similar setup to a SIP provider using g729 or g723

Hi all, I would like to call from SIP client to Asterisk then GnuGk, then Cisco 5300 to PSTN phone. Is this possible? I need simple config asterisk and gnugk.Can somebody help me? Ganbaa -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040629/cfe09e1e/attachment.htm

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

Hello there. Is there somebody with this connection working? I can't seem to make this work at all. Could someone please share some .conf files? Cheers, Vedran. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050818/71480bd9/attachment.htm

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

Hi, I have an ansterisk and a cisco 827-4v registered to a Gatekeeper. asterisk has two extensions: exten => 223,1,Dial,OH323/BYEXTENSION@827PD exten => 730,1,Dial(IAX/eduardo@10.0.11.103) (IAX are working well) When I try to call each other, gnugk shows a ARJ: ARJ|10.0.11.112:1720|223:dialedDigits|730:dialedDigits|false|resourceUnavailable I think this could be a codec

Hi. I'm not using snom phones for a while, but now I want to test again them and I'm gonna buy a snom 200 & 105 . Some times ago I had a snom 100 , and gsm wasn't working with *. How's now the situation? the snom gsm works well with * ? Thanks for any info, Matteo. -- Matteo Brancaleoni Espia System Administrator Email : mbrancaleoni@espia.it Web : http://www.espia.it

hello i was searching for solution to problem (sip->h.323). any one from this list asterisk mailing have any idea how to fix it. i am getting error when i try to call from sip to h.323 user i am successfully registering my asterisk box with gnugk. but when i try to call to h.323 openphone on working on GnuGatekeeper, asterisk is not routing it to GnuGk. i am getting the following error. do

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

Hi! I'm trying to build gnugk with asterisk. Asterisk is working well with chan_h323 built with needed PWlib v.1.5.2 and open H.323 v.1.12.2. But gnugk' s installing instructions says that I need latest PWlib(1.17.1) and openh323 to get gnugk work. Now, with installed pwlib and openh323 gnugk's compiling fails and I get error 1. Do you have any working solutions with asterisk and

Dear All, I have installed GNU gatekeeper in my machine. I tested the calls using gatekeeper successfully. Now I have tried to Disable the gatekeeper in oh323.conf file gatekeeper=DISABLE Now I have tried to call, but the connection is not established. I have got following warning message in console. " WARNING[8446]: chan_oh323.c:3555

Hi All; I used A2Billing, basically it is nice and fine, but management possibilities is not that rich, so a lot of staff are need to be repeated that let the admin facing a problem of the needed time to do the task. Anyone advise for another open source prepaid billing that is rich by the management features? Also, I hope to find an open source Billing (prepaid and postpaid) that can work with

Hello folks. We are trying to interconnect an asterisk installation with a gnugk 2.0.5 installation to become able to use some H323 hardware that needs a gatekeeper (particulary an Ericsson WebSwitch 100). We have managed asterisk to dial H323 endpoints successfully (although calls are interrupted immediately after connection with "spawn extension exited non-zero"), but we could not

I have configured call pickup, and this works fine. Although there are 2 problems, perhaps anyone would know a solution to this; - When I pickup a call from another set, the *8 code keeps being displayed in my screen (Snom 220). I would like it to show the phonenumber of the person calling me. - When a caller that I've answered through Call-Pickup disconnects, my phone does not close

Hi, I'm using asterisk with chan_h323 together with gnugk. chan_h323 and gnugk were recently compiled with pwlib-1.5.2 and openh323-1.12.2 as advised. When connecting asterisk directly by ohphone (without gatekeeper), everthing is fine. When using gnugk for usage control in routed mode, I find a funny situation in asterisk's H.323 debug: == New H.323 Connection created. --

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

I am having a slight issue. I am trying to register 2 asterisk boxes with GNUGK and when I try to add the 2nd it gets denied cause of it saying its a duplicate. How do I change the configs to allow more than one asterisk box register to the same GK? brian This email was scanned by: Mcafee GroupShield ---------------- CONFIDENTIAL DISCLAMER ---------------- All information provided in this

Hello All, I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the configuration: CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk, and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however the gatekeeper drops the call