similar to: ZyXEL 2000W

Hi, I'm not sure if I just missed something somewhere along the way, but I noticed while I was going through the CVS logs that there is an option in the wcfxs module to set an "opermode" - which apparently might help with echo issues around the globe (like the ones I'm seeing - some times). So I'd love to use it and give it a go. Apparently, there are some options that

As a follow up to my previous post, I have now identified what is causing the bug with the grandstream phones. When the line faxdetection=incoming is in the zapata.conf file, the grandstream phones will not ring, nor connect a call to the zaptel interface. Can anyone else confirm this bug? I'm going to play with the different options (incoming/outgoing/both) to see if it makes a

Does anybody have any experience with the ZyXEL Prestige 2000W? I am having problems with the line tear down when I call another extension. If nobody picks up at the other end when I hangup the 2000W, the other extension continues to ring. Is there any way to hangup a SIP call if there is no more traffic? Asterisk seems to think that there is still a connection open. This is pretty annoying

Hi! Then I phone other phones with my Zyxel 2000W (WI-FI) it just hang up when I answer the phone I am ringing. It works fine if I call the 2000W from other phones. I have tried many sip settings. I use this now: [205] type=friend username=205 secret=passwd205 callerid="Zyxel" <205> host=dynamic context=local nat=yes canreinvite=no disallow=all allow=g729

If you see a wj0011 version of firmware for Zyxel Prestige 2000W floating around (I found it in a German forum), KEEP AWAY. It completely trashed the wireless networking in my phone. -- ========================================== Rod Bacon Empowered Communications Ground Floor, 102 York St. South Melbourne Victoria, Australia. 3205 Phone: +613 99401600 Fax: +613 99401650 FWD: 512237

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Anyone have any experience with either of these, I 'd appreciate some feedback? Plus it seems pretty easy to steal a connection with this. Zyxel Prestige 2000W WiSIP thanks, - -- Steve "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." Benjamin

Hi, I'm confused as anything by this bug. I'm hoping that it is just something screwy in my config. I have 1 Cisco 7960 and several Grandstream BT101 & 102's, and a Digium TDM31B. I'm running the latest CVS (CVS-HEAD-05/27/04-17:22:40) of both Asterisk and the Zaptel driver on Fedora Cora 1. When I make an outgoing call on the Cisco phone, everything works fine. I'm

I've just seen this post: http://www.mail-archive.com/asterisk-users@lists.digium.com/msg41132.html and it took me back to play again with my dust collecting 2000W. Does anybody got DTMF to work? My sip.conf looks like this: [400] type=friend context=from-sip username=400 secret=verysecret disallow=all allow=g729 dtmfmode=rfc2833 host=dynamic nat=yes qualify=300 canreinvite=no My phone is

Hi All, Today I got a couple of ZyXEL Prestige 2000W WiFi phones. I'm having a problem making SIP calls although I can receive calls just fine. When I try to make a call the phone makes some sound (like "bup bup bup bup bup bup beep beep") and then I just hear hissing background noise (not too loud - like comfort noise). I upgraded to the latest firmware on the phone - Wj.00.10

Hi, I am having an odd problem with one of our Zyxel P-2000W v2 wireless SIP phones. The phone can no longer receive calls. DND is not turned on and the phone has the exact same configuration as the other 2 phones (they each have unique extensions and such but all other settings are the same.) What can I do to debug this in the CLI. Nothing seems to shed any light on the problem. I am using

Hi all I have just got a P2000w and experience several problems. Hopefully there is someone out there that has got it working. I saw it on Cebit and the person demonstrating it there told me that it was connected to an Asterisk server on the stand -so it should work. Problem 1: it does not register correctly It get lots of messages like this: Jun 26 19:45:19 NOTICE[1107585968]: chan_sip.c:5630

Hi, Last weekend I was planning to buy a physical PBX system, but instead I have been blown away by the fact that VoIP really works, that Asterisk is so easy to set up and use... and free! We're in Australia, so as I understand it, we aren't allowed to use the Zaptel cards. We need to set up our system to route incoming 56K data calls to the PPP daemon on our Linux box or to our

Hi, I don't know if this is possible - but can I set up asterisk to answer the FSO line after one or two rings rather than four? I haven't (yet) found a configuration variable to let me do this... Thanks in advance, Andrew _________________________ Andrew Yager Real World Technology Solutions Real People, Real SolUtions (tm) ph: (02) 9945 2567 fax: (02) 9945 2566 mob: 0405 15 2568

Hi, Just thought I'd let you guys know about my time in compiling on Panther. Not being the world's greatest Makefile expert, and after applying the patch suggested on this list (and modifying it so that the 7.2.0 was replaced by a 7.3.0 - for the latest Darwin kernel) I still had issues with my system requiring endian.h and byteswap.h . Being ignorant of most things, after much

Hi, I'm trying to get a fritz working in our asterisk box, however I'm getting the following error and was wondering if anyone could be of any help: -- Executing Macro("SIP/2002-5501", "enum-call|call|0405152568") in new stack -- Executing Goto("SIP/2002-5501", "call|0405152568|1") in new stack -- Goto (call,0405152568,1) ==

Hi Everyone, I'm one of those "newbie" users that really doesn't know what is going on. And in stark contrast to the posts you may read, I do actually think that when you post on this list, you get a reply. In fact, I know you do. I have had a quite nice run setting up asterisk, when I've had problems I've looked at the Wiki or Google, and then when I can't find

Just shoved my 7960 onto one of my clients networks. I'm talking from outside the office to them (they are using a GS BT101). I'm getting the following message repeatedly in the log, whenever someone talks. Jul 17 12:29:40 NOTICE[96402352]: frame.c:120 ast_smoother_feed: Dropping extra frame of G.729 since we already have a VAD frame at the end Both phones are set to use the G729

Hi Everyone, After a fair amount of faffing ive managed to get the 2000w working with asterisk for IP -> PSTN calls (i.e. get the phone to make and receive calls over our BT line). The final solution is to set up outgoing VoIP calls but I now know that without a SIP aware router I can think again! (damn you iptables!) In the mean time I'm trying to figure out why I can't get the

Hi, Has anyone tried the ZyXEL Prestige 2000W with * ? Is it worth the money ? Best regards Matthias -- _;\_ Matthias Cramer / mc322-ripe System & Network Manager /_. \ Dolphins Network Systems AG Phone +41-1-847'45'45 |/ -\ .) Libernstrasse 24 Fax +41-1-847'45'49 -'^`- \; CH-8112 Otelfingen

Hi, I realise this is an old question, but I’m struggling to get my head around it. The ERD suggests that endpoints can link to multiple AoRs In what situation would you actually use this? Given that mapping of inbound calls is primary done to the endpoint, it looks to me like most of the scenarios where this might be beneficial are actually not possible? One example I had envisaged was being