similar to: oh323 dial structure and oh323 debug?

Hello, i want to use asterisk as a gateway for H323-Phones. But i cant get it work. I'm using a gatekeeper on another computer. My IP-phone is registered there. Does anybody can sent me an oh323.conf and extension.conf as examples? Thanks in advance Erik Bastian -- NEU : GMX Internet.FreeDSL Ab sofort DSL-Tarif ohne Grundgebühr: http://www.gmx.net/dsl

Due to the format of the message coming from the H323 channels included w/ Asterisk we were unable to use our gatekeeper. For a quick solution we tried the OH323 channel drivers and can receive inbound calls from the parent gatekeeper. We are trying to do a dial to gatekeeper... I am trying exten => 5551212,1,Wait,2 exten => 5551212,2,Dial,OH323/5551212 But I am not sure if this is the

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

Dear All, I have installed GNU gatekeeper in my machine. I tested the calls using gatekeeper successfully. Now I have tried to Disable the gatekeeper in oh323.conf file gatekeeper=DISABLE Now I have tried to call, but the connection is not established. I have got following warning message in console. " WARNING[8446]: chan_oh323.c:3555

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

I've successfully got inbound/outbound calling working with our Asterisk using the Asterisk-OH323 channel driver. We are using a parent gatekeeper and the NuFone H323 channel driver would not work with the parent gatekeeper... I'm trying to determine a way to ensure that the line used for outbound calling is always available i.e. like trunking.. >From what I can tell when I place an

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Hi, I just installed OH323 Plugin and im now tryin to make simple Configuration to connect Openphone and Xlite to my Asterisk-Server. All works fine, i just wanna know if there's a better way to do it? Is there anything wrong with my Config? OH323.conf [general] listenAddress=0.0.0.0 listenPort=1720 connectPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=8000 udpEnd=8005 fastStart=no

Hi all, Can someone share with me his experience in making asterisk-oh323 talk to quintum gateway without gatekeeper. My set up is QUINTUM GATEWAY ------IP----M ASTERISK (OH323) Both are gateways.. but I don't know what authentication I will set up in oh323.conf and how to set it up I will be glad if anyone can help Goksie

I am experimenting with oh323 channels and h.323 gateways and a Cisco CallManager. I am not using a gatekeeper at this time. Is it possible to place calls coming into Asterisk from specific peers into specific contexts? In iax.conf eaxh peer has a context in which I can specify the context an inbound call will be placed in. I don't see anything like this in the oh323.conf file or the oh323

Hello all, Please forgive me if this sounds a little (or a lot) ignorant as I am very new to asterisk. Right now I have two pc's connected back to back through an E100 card running asterisk. I have openh323 running as well and I am able to route calls through the E1 line. Next up I would like to be able to register asterisk with a gatekeeper. On another computer is running openGK. Using

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

Hi all, i have big problems to make a h323 call over the gatekeeper from my provider. The provider demanded following account data: H323 ID: XXX-XXX-XX-X DetinationNumer: XXXXXXXXXXX I have configured the oh323.conf following: gatekeeper=XX.XX.XXX.XXX alias=XXX-XXX-XX-X Isx the alias equal to the h323id ? And how i have to make a call with the dial app ? I have following config: exten

Hi there ! I searched the whole web to find some helping information about H323 Control Protocol, but there is no way to find that information. We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 + 'asterisk-oh323_1.5 channel driver + wrapper' and configured the dialplan for using our H323 Endpoints which are ip200 Innovaphones. Besides, we also use Gnomemeeting but

Hello. I'm try to set up asterisk for making outgoing calls with oh323 channel driver version 0.7.1 with Asterisk CVS-1-01/09/05-01:41:37. Our provider uses Mera MVTS softswitch and supports only H.323. We don't use gatekeeper for connection but provider requires SOURCE PHONE NUMBER for route out calls and I don't know how I can specify this number. Call with this string exten

Hi all, i have tried to connect to a clarent gatekeeper. I have used both of h323 drivers chan_h323.so and chan_oh323.so. But no one can register to this gatekeeper. Our ip is activated on this gatekeeper. Maybe, i do wrong anything.... I have only set the "gatekeeper" option in the h323.conf or oh323.conf to the ip address from the gatekeeper. gatekeeper=x.x.x.x But no one of the

Hi, I have an ansterisk and a cisco 827-4v registered to a Gatekeeper. asterisk has two extensions: exten => 223,1,Dial,OH323/BYEXTENSION@827PD exten => 730,1,Dial(IAX/eduardo@10.0.11.103) (IAX are working well) When I try to call each other, gnugk shows a ARJ: ARJ|10.0.11.112:1720|223:dialedDigits|730:dialedDigits|false|resourceUnavailable I think this could be a codec

Hi, First at alll, I beg your pardon because maybe I explained bad my questions (because my low level english) I have asterisk 0.5.0, asterisk-oh323-0.5.6, openh323-1.12.2 and pwlib 1.5.2 compiled and installed. I have modules alsa 0.9.8 compiled and installed My PC has an audio card ac97 chipset intel i810 in its motherboard. I want to use asterisk in this way: |PC linux | --ethernet--

Hi, I get this error when trying to dial an outbound extension from a sip phone: -- snip -- -- Executing Dial("SIP/2003-02d1", "OH323/3215435249@h323gk|20") in new stack -- H.323 call to 3215435249@h323gk with codec ALAW -- Called 3215435249@h323gk 0:33.283 H225 Caller:8143908 PWLib Assertion fail: Null pointer reference, file