similar to: CISCO 7960G FIRMWARE

hi everybody, just tried to install my cisco 7960 - but without much success :-( I want to set it up as a sip phone - but I can not setup the phone's IP address... after plugging it in it says "Configuring IP" - I unlocked it and entered the "Network Configuration". I can see the edit-buttons but when I trie to press then it says "That key is not active here"

I'm trying to set-up Asterisk server and I would like to buy 2 SIP phones. Has anybody tried Cisco 7960G? Or 7940? What audio compressions can I use with this phone and Asterisk? Reason why I'm asking is because Cisco supports G.711 and G.729a audio compression (probobaly some tohers but they are not listed on data sheet) and on Asterisk features i found that it supports G.729 but need

I've noticed that a few people here are from Australia. I'm wondering where you all get your hardware from. I'll probably order some of the X100P cards from Digium soon (and possibly some FXO cards), but for other things such as ATAs, etc. However - these obviously aren't ACA compliant. Does anybody know of compatible hardware (for POTS lines) that is ACA compliant? The cheapest

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Hi..... I have just successfully setup Asterisk with 2 Cisco 7940 phones (converted for SIP) and a SIP softphone on a W2K box.....and it all seems to work very well.....to those who wrote this software, it is really cool. Anyway, I am new to this software, and I have a lot of questions which I am hoping someone on the mailing list might be able to answer for me.....I am basically trying to

Hello, I tried to configure a cisco 7905 IP phone using the skinny channel but I had not much luck. The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/500@cisco1) I set up the tftp server, and prepared the following

I could use some skinny/Cisco help here. Was finally able to get the phone registered to * but whenever someone tries to call that phone it freezes and reboots itself. Same thing happens when you pick the handset up off the 7960G; it locks and reboots about 5 sec later. Here is what * shows when I plug the phone in: -- Starting Skinny session from 64.72.107.1 Device SEP000F3442E4A7 is

Hi all, I'm writing my graduation theses : analysis VO-IP protocols , and I cannot find any documents about Cisko Skinny Client Control Protocol. I have Cisco CallManager and some IP-phone and I'm sniffing traffic between that, but I don't understand, how this protocol works. Clearly i'm looking for description of SCCP commands and explanation some basic SCCP scenarios or what

I've got a question regarding Cisco IP Phones and licencing. When using a third party PBX like asterisk is a licence required for the Cisco phones ? Has anyone got anything in writing from Cisco to clarify this ? Eg can I just use CP-7961G or do I need CP-7961G-CH1 even though I'm not using Cisco Callmanager ? HYPERLINK

I am new to Asterisk and currently work mainly with Cisco Callmanager. With Callmanager I can setup partitions and call search spaces to determine where a given phone can and can't dial. Does Asterisk offer this type of functionality, and if so how? Blake Parker -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

I found a few mentions of the 7914 being used with Asterisk, these all covered SCCP/skinny though. Does anyone know if the 7914 can even be used with SIP? If so, any pointers? Is it a services thing? Anyone get the operator (line/extension status) to work with it. Thanks for the help, Cisco doesn't even mention ANYTHING about SIP + the 7914. Matt

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

Hello everybody, im newbie in VoIP, but find this project asterisk very interesting, i tried to install and its a great sw, i really get sorprised about all of its functions, we need to use the asterisk server in conjunction with cisco callmanager. We have a Cisco Callmanager 4.1 and the clients are softphones from cisco IPCommunicator, but all the support service of our company are linux

Anyone know if it is possible to load your own XML scripts on to the phone, bypassing the Cisco CallManager? I am still waiting for my phone to arrive, but I have been playing with Cisco's phone services emulator, and that doesn't seem to like anything I pass to it. If it is possible, anyone want to share any sample scripts they have. --Mike

Hi, I'm trying to connect Asterisk 1.4 and Cisco CallManager 5 using SIP Trunk without MTP (media termination point). Howerver, Cisco 79xx phones do not support RFC2833, they always notify CCM5 via SKINNY channel no matter where they send RTP to. For non-MTP trunk there's Out-of-band DTMF support in CCM5 called "kpml". I wonder if Asterisk can support it. I found an

I assume there are several people on this list that have Cisco Call Manager implementations under their belt.... We are beginning a call manager implementation and the first question I asked Cisco was, should we use SIP or Skinny. Cisco is pushing me towards Skinny, saying that I will lose some functionality with SIP. They also say that most of their customers implement skinny. I see two

ive had enough of cisco unity and microsoft exchange and im looking for alternatives to our voip system. right now, we have 3 cisco callmanagers, 1 cisco ip icd system, and 1 cisco unity voicemail system. all phones are cisco 7940/7960's and some ata186/188's. voice gateways are cisco vg200's with pri cards (5 total). im running h323 on the gateways and phones are of course