similar to: Rotary phones? (No, I'm serious)

Folks, I've got one of those GPO 1950's rotary dial phones that I'm trying to get working in the UK. I've got pretty much everything working with my TDM400, the phone rings and I can receive calls but I cannot dial with the rotary dialer. I have set pulsedial=true or whatever the exact setting is and I can dial from the phone by lifting the receiver and tapping out the number on

I'm trying to use a couple of old Western Electric type 500 phones (desk model, rotary dial). These phones work fine, as tested with telco lines (they dial, receiver/transmitter works fine, etc). I'm running Asterisk 1.6.2.11. I can't get them to dial through Asterisk. They are connected to a Rhino channel bank which is connected to Asterisk via a Sangnoma card (T1 with echo

Ok... I am not a telephone guy... I was born after rotary phones, so forgive my ignorance in this matter. I am trying to get a really old rotary phone up and running with an ATA. Why? Who knows... just thought it would be cool. The problem is that it does not have an RJ11 connector, instead it has three wires (green,yellow,red). Does anyone know what that type of connector is called? Or

So I've been on the Asterisk list for a long time. Mostly looking to set it up as a cheap alternative to a commercial MeetMe bridge, as a for-fun project. I keep noticing the Wildcard FXO X100P sorta seems like a Winmodem. Winmodems are basically a sound card chip tied to a pots port, where the Winders driver takes on the MO/DEM functions in software. I've always despised them as a data

Hello, With Icecast1 existed the functionality to have the server feed static content from disk. It generated a playlist file for the one file passed to it, and off things went. I googled around a bit and found people saying it was possible to do this with icecast2, but the one outside link I found was now invalid. Are there any pointers about how to add static content? Does it work

> Here's a description of how their API works and what you have to send > it. I don't have a solution for sending it from the server and would > LOVE to know one myself! I used to run an internet radio station that was listed on TuneIn! Turned it all off when I took a job with a large internet streaming music service. The way my setup worked was the automation system was

I have a situation where I'd like to be able to have icecast reach out to another icecast server as a client. Is this possible with relaying? From what I read relaying and master relaying both have the server reach out to another server. The reason is this. I have a hardware encoder (Telos audioactive) sitting on a cablemodem. I have a remote provider (streamcheap or something) set to

I've been able to successfully stream using Icecast with Darkice on my Debian box. I want to be able to stream multiple live streams from the same box using different sound cards (Basically, we have groups that will be using different TV channels and want to be able to stream the audio to the user's pc's for the proper channels they are viewing). Has anyone tried to do this?

Looking to install asterisk for a client and was shopping around for prices for 6 POTS lines with or an integrated T1 with voice and data. I called up Sprint and I told the sales rep that there was going to be a Phone system she said that they would have to install "key" rotary lines and then I told the rep that I needed two more lines with hunt group and she told me that would be

I've noticed that some callers listen to our main menu and don't press any keys. I have it set up to restart the menu a few times and eventually hang up. I'm wondering if these are wrong numbers (in that case, why don't they hang up) or they really want to speak to someone here but don't understand the menu (what's so hard about "for the operator, press

Hi. Does anyone know about a simple one-fxs ATA with pulse dialing support that can work with Asterisk? A SIP one would be ok. I've been told that the Digium S101i IAXy does support pulse dialing; although it's a iax2-only ata it could be enough. I need a bunch of them to convert some old fashioned rotary phones into VoIP ones (I'd like to disassemble the ATAs to remove the boards

I got 2 cards working, and will need to add another 2 cards shortly. I hadn't thought about the matter-it's something I can try to play with later. What you've done here is awesome, where did you come across a system that could house 11 pci cards? ______________________________________________ Andrew Wehner Chatham Financial - Kennett Square T: 484.731.0029 -----Original

Hello, I had two quad-E1 Tormenta2 cards in my system and yesterday i had to replace the CPU. I noticed the rotary switch on each card that sets the card number or ID... Both switches were set up on 0 and everything worked fine. Should i set one card to 0 and the other one to 1, or... "if it works, don't fix it!" ? I had some nightmares with IDs on Dialogic hardware with Bayonne

On Tue, 2005-01-18 at 09:49 -0600, asterisk-dev-request@lists.digium.com wrote: > > Hi, > > I am Arnaud F?vrier, I teach in a technical university in Marseille. > > I'd like to know if is is possible to connect a very old phone to > asterisk and dial pulses with it? > > Are digium cards pulse dial compatible? > > Is there any specific configuration

Hi, Long story short - I have an ancient Britsh Telecom phone attached to my Asterisk PBX via Dahdi. It works beautifully, receiving calls, and the call quality is excellent. However, dialling out is impossible, as Asterisk consistently mis-reads the number of pulses the dial sends (it could be a squiffy dial, I'm not sure). Not to mention the fact that, in today's modern "want

Folks, I have a TDM400 with an FXS module. I'm having some trouble ringing some phones attached to the device. I have a real el cheapo handset that cost me about 9UKP. It works fine, I plug it into the Wildcard and call the channel and it rings. I have tried plugging in my BT Diverse 3016 cordless phone but it will not ring, although I can call out from it. I have also tried my GPO 332L

Hello... Coming from an Icecast 1 background, I tend to like the admin functionality of Icecast1 over Icecast2. Fixing this is but some file editing away, I supposed. I'm trying to simplify the administration screens for myself and co-sysop. In testing, if I copy the listclients.xsl into the web directory, it works like I would like... almost. I get a listing of every stream on the

Hi, I am just trying to figure out how to setup a TDM04B card for incoming/outgoing calls. I have 4 lines, which are provided as a rotary trunk group, currently hooked into a Nortel system, which asterisk will replace. I have setup a Dell 1800 (Tower) system with the TDM04B card, which seems to work. The question is how do I set it up that all 4 lines are part of a trunk group, such that

Ben, Thanks for the tip! I've added the patch to Bug 2705 on bugzilla. Cheers, Ethan On Fri, Apr 7, 2017 at 11:33 AM, Ben Lindstrom <mouring at offwriting.org> wrote: > > The mailinglist strips out attachments. So either you need to add it to > the bug or post it in-line to the email. > > Ben > > Ethan Rahn wrote: > > Darren, > > Thanks, evidently I

Dear all: Does anybody know about label conflicts between xtable and Hmisc? I found a couple of e-mails similar to this problem but is not clear to me how to get around the label problem. The first table(longtable below) is generated with the latex function from Hmisc but for some reason when I try to hyperlink to it,it takes me to the top of the document. The second table created with the xtable