similar to: sound quality IAX client GSM to ALAW with oh323

Dear all, I'm trying to use ulaw and alaw with Diax and Asterisk but I'm not able to, I got the following error message: Mar 20 11:47:59 NOTICE[7099]: chan_iax2.c:6350 socket_read: Rejected connect attempt from 192.168.0.55, requested/capability 0x8/0xc incompatible with our capability 0xfe02. I do not understand why because my Asterisk box load these codecs properly! Does somebody

Hello veryone, I am interested in the diffusion of particles inside a sphere, and its release through a small pore on the sphere surface. Unfortunately, I have not found the way to do this in R. Could you help me? Thank very much in advance for your help

Hello,everyone, I encoutered some difficult with IAX when I run the asterisk. <---->internet <--> asterisk + NAT <--> DIAX my * box and NAT are at the same linux box which connecting to the internet using ADSL. The box has two network cards and two IP address,such as public IP:211.11.11.11 private IP:192.168.1.10 the windows box running DIAX lies behind the

Hello all, I am running into some problems with a snom 105 phone trying to do a attended transfer . Snom phones are connected to Asterisk. This does not work, it will only do a unattended transfer. I have downloaded the manual from snom and followed the instructions. Has anyone experienced the same problem ? any ideas how to solve the problem. thanks, Arne.

Hi all, A new version of DIAX (0.9.8a) is ready to be downloaded from the following locations: http://www.laser.com/dante or http://www.geocities.com/tdanro What's new in 0.9.8a: - unconditional autoanswer or based on CallerID (user configurable); - use any Ericsson/SonyEricsson GSM/PCS to control DIAX (feedback on the phone display) through Bluetooth (or serial cable). You do not even

I've downloaded diax-0.9.6b and configured for IAX2. Calls from Diax to * are perfect. However, when calling from * to Diax, I get the following: channel.c:1097 ast_read: Dropping incompatible voice frame on IAX2[mike]/3 of format GSM since our native format has changed to ULAW In iax.conf I have: allow=all disallow=g723.1 disallow=lpc10 allow gsm Has anyone else seen this? Thanks,

hi i am trying DIAX and *. i cannot make calls from ne DIAX to another. whats the config? exten=>44,1,Dial(IAX/username,20,tr) ??? just a guess. any help will be appreciated. cm ===== Designs __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree

Greetings, DIAX seems to work well placing calls, but I can't actually receive a call . Here, DIAX (x305) "registers", then I use a sip phone to place a call to DIAX (which definitely is not in use by me at debug time, but it is idle on my desktop.I think), and then * goes to vmail. Here's the debug output: affinity*CLI> iax debug IAX Debugging Enabled Rx-Frame Retry[N/A]

Hi all, A first basic version of DIAX as an ActiveX can be downloaded from: http://www.laser.com/dante/diax/activediax.zip There is only one small file (diax.ocx) and a readme.txt with the usage instructions. For the moment you can only place authenticated (or not) calls and there is no feedback (ring, messages, etc) Put this simple thing on your web page and you will be able to dial from any

Hello, today I tried a DIAX -> * -> DIAX connection over the internet (768/128 ADSL connection on both sides). The sound quality was great. However, we had some latency problems, and also, if both sides where not talking the first words had some problems getting thru. Is this expected, is there anything that can be done on our setup, any magical iax.conf entry? Thanks and best regards

Hi, I just got hold on an Orion E1 30 port GSM Gateway, and I am having problems trying to get the E1 link to come up. I am using Asteisk 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both the Digium and Samgoma types, as I have successfully hooked up to many PBX's and such, but I just cant seem to get this one to work. None of the 30 channels 'come up'.

Hi all, Thanks to Steven Sokol great work, the IAX2 bug in DIAX is now solved. For the interested people, you can download the new DLL (just the IAX2 version) from the following location: http://www.laser.com/dante/diax/wiax2.zip Replace the wiax2.dll file in the app directory with the new one and this is all. Please test it and send me your feedback. I intend to release a new DIAX version this

I've configured the DIAX phone. It registers with the * server, and I am able to make calls from DIAX. However, when I try to call the DIAX phone from another phone, I get a busy signal. My extensions.conf: exten => 70,1,Dial(IAX/mike/mike,30,tr) # IAX Mike exten => 70,2,Voicemail(u70) exten => 70,102,Voicemail(b70) and my iax.conf: [mike] type=friend username=mike host=dynamic

I am having a problem with softphone registration, having read the list and watched it for a while for similar problems I just cant seem to figure out the problem. Using SJPHONE or DIAX , I can make outgoing calls but I can't get them to register with asterisk, I have other sip devices registering OK-7940's. From the list and the digium web site this seems to be a straight forward set up

Hi all, DIAX 0.9.9g is available for download (including the updated help file and web page) from the following locations: http://www.laser.com/dante or http://www.geocities.com/tdanro What's new in 0.9.9g (from 0.9.9f): - during a call, accept DTMF tones as monitored events to trigger output commands - call timer on the phone display - Swedish language added - can run a command from the

Hi, I'm testind Diax. I have flashing note about 1 new voice message. Can I hear it somehow from Diax gui, or must I call pbx to get message ? Thanks, Robert.

Hi all, I kindly ask DIAX users to send me a feedback related to the stability of the new version (0.9.9f), comparing with the older versions (especially 0.9.8). I ask this because I have DIAX runing for one week now without any crash. It is used mainly to control some X10 devices through a regular phone. Thank you and best regards, Dan

Does anyone Know if tha avaya 4621 IP phone work wiht asteisk? if it work it has featuras working Thanks Ignacio -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051014/d3a65784/attachment.htm

Hi, There is any other user of DIAX with this problem? Thanks, Dan

I am having problems getting any form of call transfer working. I have reconfigured blind transfers to be #1 and assisted transfers to be *2 but these are not working. Looking at the wiki (http://www.voip-info.org/wiki-Asterisk+cmd+Transfer) it it does not mention IAX so I assume I have to use the native IAX transfer supported by Diax? I have tried using Diax but am getting a problem that after