similar to: Cisco 7960 NAT question

wondering if anybody knows this......does shady dial work only with a zap interface or can it be configured to be used with SIP or IAX. Nauman -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of asterisk-users-request@lists.digium.com Sent: Thursday, July 08, 2004 5:48 PM To: asterisk-users@lists.digium.com Subject:

I had no trouble compiling TP1 some time ago. Now TP3 ./configure ends abruptly with:- Using shared libraries: no (not supported on this system) in Fedora-6, Ubuntu-6 and Zenwalk, all with full development packages installed. What does it mean? Mike

Een ingesloten tekst met niet-gespecificeerde tekenset is van het bericht gescrubt ... Naam: niet beschikbaar Url: https://stat.ethz.ch/pipermail/r-help/attachments/20080129/23f6cbc7/attachment.asc

The vblank on nvc0 was not working correctly and would freeze X, I managed to track it down and fix it with some help from m.b.lankhorst, see https://bugs.freedesktop.org/show_bug.cgi?id=56692 for details. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20121106/27ceb48e/attachment.html> --------------

https://bugs.freedesktop.org/show_bug.cgi?id=95212 Bug ID: 95212 Summary: GT215GLM Rendering hickups with gnome-shell Product: Mesa Version: 11.2 Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: Drivers/DRI/nouveau Assignee: nouveau at

Hi there colleagues, atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0 atacontrol detach ata7 - insert ATA disk (ad14) atacontrol attach ata7 pinics with Fatal trap 12: page fault while in kernel mode (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc0533227

Hello All, I'm having some issues controlling graphics in R. I was wondering if anyone may help me tackle this problem: Given a data frame "X" with variables "Year", "Factor" (w/ n groups), and "Freq" How do I create a single graphic with the following plots aligned in a vertical stack? 1. box plot in the fashion Freq~Year|Factor 2. box plot

We''ve just released the fourth technology preview release of Samba 4. ============= About Samba 4 ============= Samba 4 is the ambitious next version of the Samba suite that is being developed in parallel to the stable 3.0 series. The main emphasis in this branch is support for the Active Directory logon protocols used by Windows 2000 and above. While we welcome your interest in Samba

Hola everyone, Solving this issue would be a huge time saver for analyzing my thesis data, so I'll try to be as concise as possible and hope that someone can give me a hand. I am trying to run a function that I created, which works fine until I try to use it with the by function. That function is listed at the bottom (f3) just in case that might be the issue. Essentially I have compiled a

Hi all I have created a lattice graph but the text appears too big. Just wondering if there was a way I could change the font size. tp1.nDai=xyplot(value ~ yr | Name, data = nDai,type = 'o') update(tp1.nDai, aspect = c(0.8), layout = c(4, 4)) I would appreciate your help. Kind regards andy Andrew McFadden MVS BVSc Incursion Investigator Investigation & Diagnostic Centres -

On 12/1/2012 7:10 PM, Nick Lewycky wrote: > > I don't know of any, but I was wondering if you could point me to the > paper that describes predictive commoning? I could only find the > second-order predictive commoning paper, which if I understand correctly > is a much newer and different algorithm. I think the original paper was some internal IBM publication. The idea is

Greetings, I have several Tyan S2518UGN (Thunder LE-T) server boards that I've been running for a few yrs. I've always used the SCSI on them, so never really used the ATA ports. I once experimented dual-booting NT2003 & FBSD on one of the ATA ports about a year ago. But ran into the problem I'm running into now. Back then I just blamed it on the drive (even tho it was brand new,

Hey Guys, I know it's only TP1 and maybe? this isn't the best place to ask but where do I start? I've download the debian experimental Samba 4 TP1 package and installed it. The debian installer did the provisioning and I've set up dns. I set up a share and it all seems to work fine with the built-in administrator account. But what now? how do I join computers to the domaind? Do

hallo all, i would like to know, as i would suspect, nativ bridiging should work also, if only one iax party is behind an nat router and the other has a public ip. when i connect to iax clients, which have both pubic ip's nativ bridging is working. if one of the clients is behind an nat, the iax2 channels always get routed through the asterisk server (latest stable version from cvs) ?? i

How to change status of peers "Unmonitored" to monitored? Home users showing "Unmonitored" some display timing. Name/Username Host Mask Port Status zoiper_kathy/zo 112.200.83.69 (D) 255.255.255.255 9330 Unmonitored clinic_server (null) (D) 255.255.255.255 0 Unmonitored voip

I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another inbound call until a call out again from it first. Any ideas? I am using SIP and am using the latest

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

Hello, I am new in Asterisk Community, i am working on Asterisk 1.6, i need to know how can i monitor the extension status? when i wrote sip show peers on asterisk Extension Domain port Status 111/111 (Unspecified) D 0 Unmonitored 1300/1300 192.168.50.111 D 5060 Unmonitored 222/222

Hi all, My scenario is such that I have three users connected to a conference. CLI> meetme list 1234 User #: 01 9176502096 <no name> Channel: Zap/23-1 (unmonitored)00:00:32 User #: 02 john john Channel: SIP/john-b7800468 (unmonitored) 00:00:28 User #: 03 6463875998 <no name> Channel: Zap/22-1 (unmonitored)00:00:19 3 users in that

Hi list! I have a problem and I hope someone can help me... I configured an Asterisk on a VM to serve more accounts and act as a proxy to other SIP-providers. The first account running on my phone works without any problem. A second account, running on the phone of my wife, is always UNREACHABLE. I can just see in the log: [May 28 21:48:46] NOTICE[3646]: chan_sip.c:22933 sip_poke_noanswer: Peer