similar to: New PBX Help

Hi list, we want to connect asterisk to an traditionnal PBX (EADS 6550/Matra). People from telco told that they can't connect two PBX's using E1/T1 or only with QSig signaling. I wanted to use EuroISDN. In this case, it was me told that VN6-VN7 would be used. The PBX has a spare ADQ card installed on which we would connect. Has someone a such working setup? Is it working well? More

Client - Not for Profit in the Middle of the Jungle/Rain Forrest Infrastructure - Datacenter is Non Climate Controlled, Prone to Flooding, and has Sketchy Power, LAN - NEW Cabling in main Office building, Hodge Podge of DYI wiring across remaining buildings. Phones - Total of about 50 extensions. Only about 25 - 30 phones will be IP phones, 20-30 more will have to be analog due to the distance.

We currently have a Toshiba Perception EX and I would like to start moving toward VOIP. Is there anyway we can run these two systems in parrallel? Better yet, is there anyway we can run fully on asterisk using the current PBX hardware? The current PBX has a mix of analog, digital and electronic cards in it. I tried to google for advice but I didn't find anything that pertained to this.

Hi, all. I've got an old Telrad PBX with an Emagen(?) voicemail box. The VM box, itself, is beginning to show its age. Big-time. We're thinking it might be time to look for a replacement. I'd love to install Asterisk with an FXO card or something, but I don't think it supports whatever protocol legacy PBX's used to speak to VM systems. If someone can tell me I'm

Dear All, I have a setup where three errision PBX's (head office & 2 branch offices ) are @ three different location. Head of has a errision BP250 where the branch officers has Errision BP50's. I wana connect all three PBX's through IP link's. My idea is to connect BP250 ( head office ) to asterisk. This has to be done using analog interfacing coz there is no E1 / or T1

I'm considering using asterisk to replace an existing PBX in a 40 room hotel and would appreciate any comments, corrections or insight before I begin. Only 8 PSTN connections are initially required but since the guests need dial-up internet access in the rooms it has to be Frac-T1 as opposed to using FXO ports on a channel bank. IP phones are not an option strictly because of price. The

Hi, I'm new to Asterisk, and am researching information on linking Asterisk to an existing PBX. Could somebody please help me with what might be required for the following setup? - - We have an existing PBX. - I am going to setup Asterisk on our internal network along with some internal SIP phones. - I understand how Asterisk will act as the SIP Server, and SIP phones will be able to call

once u press 9 is there a way to make it so it restores dial tone, like most pbx's do? so dial tone , 9, dialtone, then ur local num -- Gafachi.com - referal code hunter81 instant iax termination - 2 cents a minute Also they have a great referal program, tell them jacob, hunter81 sent you -------------- next part -------------- A non-text attachment was scrubbed... Name: not available

Hi guys, Can I use a Sangoma a101 to interface a legacy pbx to an Asterisk server? The pbx doesn't have sip and I want to come in off of a sip trunk and interface with the older system. I know I can use a pri card to hook in to the phone network, but can I use this same card to feed back the signaling as if I were the phone company to the older system? Thanks, Tom

We have an old Telrad 128KSU PBX to which I am trying to connect asterisk in the following manner: Current Setup: Telco-> T1->PBX Desired Setup: Telco-> T1-> Asterisk-> T1-> PBX. I am first trying to setup the Asterisk -> T1->PBX part without disturbing existing setup so I can get asterisk to forward calls to PBX and once that is done, I would try to move the telco

Hi :) My employer is looking to move a call centre to a new office, and has been increasingly frustrated with their legacy PBX (call-logging licensing and hardware upgrade costs). So I've stepped forth as the Open Source Pedant and suggested Asterisk so we can do all our own CallerID / call logging / analyses, and make use of IP Phones / teleworking, etc. The problem begins in that I only

I want to interface asterisk with a legacy pbx that has around 23 extensions through my 8 fxs card, how do i work around this? Hint: I have already terminated 8 extensions from the legacy PBX, i was thinking whether i can peer the extensions from the PBX i.e like 5 extensions be peered to one extension connecting to the fxs? How can i do this? Thanks in advance, -------------- next part

I've tried to transfer a call using the Flash command, but with my configuration it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk that acts like an IVR: TELCO line --> traditional PBX (FXS) --> (FXO) Asterisk >From the TELCO line I can make a call to the traditional PBX and reach Asterisk, the IVR system on Asterisk answers the call and I can

Hi, Is there anyone here who has experience connecting Asterisk (ver 13.8) with PBX Panasonic KX-TDA600 ? The architecture more less like this : Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax Thanks in advance, Regards, Ikka - Jakarta, Indonesia -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, i want to make an extension from pbx1 able to tlak to another extension from pbx2 or use pbx2's trunk to dial outside calls. so i edited in both servers accordinally the iax.conf: register => pbx1:pass at 172.16.200.175 <pbx1%3Apass at 172.16.200.175> [pbx2] type=friend host=dynamic trunk=yes sercret=pass context=[default] ; i used the biggest context to avoid confusion as

Hi all, I have a user with an old Mitel PBX connected to a couple of SPA112's. The user is reporting that their phones ring several times a day and when they answer the "call," all they hear is dial tone or busy signal. Their PBX guy says that the SPA112's aren't providing line supervision and the PBX requires it. Does anyone know how to fix this? I'd also like to

Yeah....I think that every install I have done the first thing that happens is "why is there a delay before the call connects?" and the answer is "you have to hit dial or wait 10 seconds". -Jonathan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tom Rymes Sent: Thursday, August 11, 2005

Does anyone have experience with melding Asterisk with an older Executone PBX? I have a client whose existing voicemail server(repartee) has become bonkers and we need to stick a VM system in there asap. I thought asterisk would be a good thing to use. Does anyone have experience with the older Executone PBX's and asterisk? Any caveats, any tips, any things I should be aware of? Thanks,

Hello, Does anyone have experience with a %100 all VoIP * setup? I imagine an office with 50 extensions or so, a full T1 connected to a decent ISP and an account with NuFone (IAX2 trunking, G729a). I would need to support at least 25 simultaneous outgoing (7960G -> Asterisk -> NuFone -> PSTN) phone calls. I would probably keep four or so analog lines for local calls, 411, 911,

hello everybody, one of our customers which wants a soft transfer between his old pbx to asterisk and sip. the setup is as follows: telco <---pri---> asterisk <---pri---> legacy pbx everything is fine exept that when dialling from the legacy pbx it takes about 3 seconds before the asterisk start to dial. where does this delay come from? has it to do with