similar to: Hangup's not detected correctly

I have an asterisk server running on Redhat 8.0 with a Digium TDM400P w/4 FXO modules (TDM04P) There are 2 lines going into the Digium card. One line is a Vonage digital line, and the other line is a Comcast voice line. I have a SIP Grandstream 100 phone connected to the Asterisk server. I also have IAX configured with FWD. The problem is that on occasionally, after talking for about 20

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

I have a couple of X100P's in my system and while on calls they just randomly hang up for no reason. I have tried messing with the busydetect and callprogress setting them to yes and no same and still random hangups. Is there another setting I should be looking at? My zap config looks like. context = inbound-work include => extensions signalling

I have a very strange problem I'm hoping someone has encountered already. I've scoured the internet for an answer to this one. My phone company provides no disconnect supervision. Hence I'm forced to use the busydetect feature. I have a TDM400 with two FXO ports. If I call from an internal extension to a landline and then hangup the landline Asterisk detects the busy signal

I was really looking forward to Asterisk 1.0 et al, but it is a major disappointment. I have never experienced any Asterisk release that was interacting with Digium hardware so unreliably. Asterisk hangs up on every outgoing PSTN call (via Zaptel) as soon as the call is being picked up at the other end. I have tried various X100P (original Digium) cards, various phone lines and just about every

I would like to pose the following problem to this mailing list to see if any of you have any suggestions you may offer. I am running samba on a RedHat 7.2 Athalon box with software RAID 0 dual IDE disks on an ext3 filesystem. I have several users in a large community of users that are always hitting the samba server. The machine has been consistently reliable with one exception. There is

Hi , I''m getting random hangups on zap channels with long calls. It seems that the hungup happens after 10 minutes or so. AbsoluteTimeout is set to 0. Any other thing I should be configuring? Thanks! PHM

Hi, I'm trying to get up and running a TDM400 with a standard italian pots line but i'm having problems at getting asterisk to detect when the line get answered on outgoing calls. I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. I tried with and without answeronpolarityswitch=yes but it didn't change anything at all. With callprogress=yes answer get never detected. With

Hello, We have a call redirection system setup inhouse to send calls from an incoming line on a T1 to an external dialed out number: Zap(call comes in) -> Asterisk -> Zap(call dials out) The call comes in on a Robbed-bit T1 (d4/ami EM Wink) and goes out on a PRI. We are using Asterisk release 1.0.5 Randomly the calls will drop less than a minute into the call. The Debug messages at the

Well, I thought and hoped my issue of random hangups on our TDM400P were related to busydetect=yes in zapata.conf. The behavior of a call being hungup has not changed, however, since setting the busydetect option to 'no'. Again, the only affected user is my loud talker... What are some causes/solutions to seemingly random call disconnects on Zap channels that people have seen? I have

I've installed a TDM400. Having a go with AMP. I would like incoming calls to be put throuhg to an extension (at my desk) and a mobile (cell phone) at the same time. Whichever picks up, gets the call.. This should be possible with AMP (call groups, 200|201|0*0408xxxxxx), but it didn't work, so I have created a custom-incoming in extensions-custom.conf What is happening is, The extension

Hi List, I've got * randomly hanging up on inbound or outbound calls on zap channels. I use a Digitnetworks X100P clone card. Any idea of what might be happening? Cheers, Jean-Michel.

Hi, Try as I might, I can't get hangups detected on a Zap channel with loop start lines. So, after someone leaves a voicemail and then hangs up, Asterisk doesn't know it, exits VoicemailMain2, and loops back to the corporate greeting, tying up the line even though the outside caller has hung up. Therefore, I've added the following hideous hack - er, code - to voicemail2.c. It

Hi, I'm having random hangup problems with zap channels. If I turn busydetect off in Zapata.conf, * fails completely to detect a user hangup in the middle of a script. On the other hand, if I turn it on, everything works much better, but long calls tend to be hung up without a motive. Any other parameter that I can try? Any #define that I can tweak and recompile? Will callprogress

Folks, For the last few days I've been trying to experiment with a Panasonic PBX and an X100P but have run into quite a few problems which I am not sure if they can be solved with this type of card (how about TDM01B?) 1) I wanted to use *'s IVR capabilities, so I routed the calls to the extension where the x100p was connected to. Asterisk should answer the call, playback a message,

Hi, I had been using 4 X100P cards in my Asterisk box, but 2 of them were sharing an interrupt. Therefore, periodically I would hear beeps and clicks that I had assumed were a result of this. So, I ordered a TDM400P with 4 FXO modules and installed it in the box last night. Today, we've had nothing but problems with it dropping calls. I installed the latest CVS of everything, and we've

When a caller hangs up (e.g. after leaving a voicemail), my British Telecom exchange sends a continuous tone for about 15s and then silence. I can't get asterisk to recognise this tone as a hangup indication. I have tried indications.conf with both country=uk and country=us. My zapata.conf has busydetect=yes, callprogress=yes and I've tried setting busycount from 1 through 7 I am using

Hi, I was about to send a question to the list about this when I figured out the solution. I thought it might be useful to store in the archives. I use a X100P and a TDM400P, using current code from CVS. When I dial in via the X100 I get -- Starting simple switch on 'Zap/1-1' right away in the CLI. However, it takes (took) * a few seconds to continue patching the call through to

Hello I have a working * server with a TDM card and 4 FXO ports. We have 4 lines now and need to add 2 more lines (and possibly two more later). I'm wondering the best upgrade path for this situation. The simplest I can invision is adding another TDM400 card with 4 FXO ports, and use 2 now and the remaining 2 later. Are there success stories with using 2 TDM cards? Any info will be

So I made the mistake of buying a Carrier Access channel bank without noticing the page on the wiki about the fact that they don't support disconnect supervision (bastards!). However, apart from that, I do have it working fine for incoming calls. Is there some trick to get asterisk to detect the hangup tones from SBC? I've tried busydetect and callprogress as suggested, but neither