similar to: 2x analog interface (1 ISDN and 1 door phone) recomendation for Europe ?

Hello We have setup a doorbell which has an inbuilt analog phone which is connected to our Asterisk via a SPA2000 ATA. The problem we are getting is that when a caller presses the buzzer it is taking two or more minutes to finally call the reception phone. In the SPA2000 I have set dtmfmode to be inband. I notice that with the asterisk you dial a number and then it waits for a timeout

Hi, Is there an affordable HW solution to do a door phone on *? I do not mind using the solder iron to modify an existing door box. Thank you! Best regards HB Norway

Hi, Anyone know anything about Asterisk's support for door phones? Receiving the call from the door intercom system, opening the door, etc? Any hardware recommendations? I understand that the equipment we have now is Panasonic proprietary and came with the currently deployed Panasonic TD12-32 pbx. We intend to deploy Asterisk in a 72 extensions + 16 trunks in a while, so any info will be

Hi! I am new to asterisk and I'd like to know wheter the following scenario is possible: Someone press the Button on the door station. The door station dials lets say the extension 333. I take the call on 333 and talk with the person on the door. Now I'd like to activate the door opener by pressing some numbers on the analog telefon. Asterisk should now recognize that I pressed

Thers a box we can get here in Australia that has an RJ45 plug, a built in web server that has a config page and URL's to close/open one of 4 included relays. I use phpagi to hit the url and open/close doors that way. If anyone is interested, ill let you know URL's but its being sold from our local Jaycar agent. Regards Kevin -----Original Message----- From:

Hello, I have a customer who has their front door integrated to their current phone system. If someone presses the buzzer, the secretaries phone will ring, and she can talk to the person at the door. By pressing ** she can release the door. Anyone have any sort of integration like this. Are there IP devices anyone is using? They have a pizza box server as their asterisk server with

Hi, I'd kindly ask for any advices, experiences and opinions on what Primary (and also several BRI) cards should be used on EuroISDN and Asterisk ? I'm also curious what features do these cards offer regarding echo cancellation (mostly when calling from analog lines) ? Thanks in advance, regards, Rob.

Hi all I have a door entry system that connects to an FXS Card. When the button is pressed it dials an extension which is actually a group of all other SIP extension. Is there anyway you can specify that the phones ring a different ring type when a call is received by that FXS card extension ? This is so I can determin the difference between a call and a door entry ring. I saw that a snom

Hi, Does anybody know of a VoIP compatible doorbell or door intercom unit? I've contemplated buying a cheap SIP phone, ripping it apart, and putting it inside an IP66 sealed unit... It would need: - At least one speed-dial key, or some way to make every button dial the same extension number - PoE (power over ethernet), so I can power it off the central switch - cheap enough to rip apart

Hi Everyone, Looking to replace a condo intercom system. Apparently the current one taps into the lines and dials phone numbers but needs to be changed as it's faulty. I will probably still use the same analogue dialing and back it up with a VoIP line and use the current cabling that is in place. But as for as the door opening function goes, I am not sure how to interface and how open these

Asterisk as a phone system makes perfect sense in a condo. You can get all the DID's you want and eliminate costs for the owners. You can offer standard FXO for people who don't care and IP sets for people who want to "upgrade" to feature sets. Your door openner is a piece of cake. 1. Create an option in your dialplan only in the "from-access-door" context that reads

Hi all, I have had (what I consider) an odd request. The installation I'm working on now is an office on a multi-floor building. They 're looking for some kind of solution with the phone system to provide door control. We are a non-profit so of course I'm looking for something VERY inexpensive. I'm sure /someone/ has done something like this. I'd appreciate any ideas. Cassius

Hi! I would like to connect a door phone to my asterisk server. I decided to do that with an analog (a/b) doorphone and a sipura box. Can anyone give me a recommendation for a door phone with good voice quality? I am from Austria/Europe and I looked at products from Rocom and from Auerswald. Does anyone use one of these door phones and can me tell his/her opinion on that?! thx in advance, tom

Hi there, I'm new to this list, so sorry if this has already been asked before [hopefully this is the correct list too!]. I'm in the process of building my asterisk system. I've set up a CentOS machine, together with Cisco 7912 phone over SIP. I can make and receive calls from outside over my TDM400 card [2 FXO ports], everything works fine. My next project is to integrate or rebuild

Hi, we're testing Asterisk 1 RC 2 behind ordinary router and NAT. Since we're sharing network with web server it seems like voip packets are not coming through fast enough (Digium demo dies after few seconds...). It's the same if I make direct calls (passing Asterisk) so we conclude it's network problem - it also work normally outside our router... I wonder what solutions can we

Hi, I'm trying to implement dynamic routing of incoming calls to local extension if previous outgoing call was unanswered. But after I do Goto to s-NOANSWER, variable ${EXTEN} changes to 's-NOANSWER'. I guess this is normal, but I don't understand why ? How to workaround on this one ? Thanks in advance, regards, Rob. [outbound-capi-ISDN] exten => _0.,1,NoOp(Calling ISDN

I have a customer that has a campground. Wants to see who's at the gate, remotely, via camera, and talk to that person through a "traditional squawk box" and be able to open the gate remotely from that phone. He doesn't want to have a separate camera feed, etc, he wants to do it all on one phone. Does such a way to do this exist by using Asterisk and some kind of relay

Hi, I'm testind Diax. I have flashing note about 1 new voice message. Can I hear it somehow from Diax gui, or must I call pbx to get message ? Thanks, Robert.

Does anyone have any recomendations for a free Windows softphone, SIP or IAX that supports the following features: * Message Waiting Indicator * Consultative Transfers * Speed Dials -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040518/ed93a1b4/attachment.htm

Hi, folks. I want to buy FXS-SIP terminal with 4 ports (up to 250$). Do you have any recomendations and Asterisk configurations samples for such devices. Any pitfalls? Actually i realy don't know what to buy? -- ========================================================================= = Best regards, Nikolay Pavlov. <<<------------------------------------ =