similar to: Vonage Softphone/resolved

Does anyone currently use Vonage with Asterisk? I've tried to set it up but it looks like Asterisk (at least the version that I have) does not handle well the SIP call dialog, sending a BYE with the wrong tag. As a result, when I hang up, Vonage sends back a 400 Bad Request and the call on the PSTN side does not hang up. I know that Vonage does a lot of nasty stuff which impacts UA's

Hello everyone. I've seen postings for connecting asterisk to vonage but I'm still having trouble achieving that. I have a vonage softphone and I'm trying to register to vonage using asterisk. I have not had any luck. I am behind a firewall. I've successfully gotten xlite to connect and work from the same network. When I change the port setting in [general] to 5061, I am able to

Could anyone help me set up Asterisk in such a way that it makes SIP-SIP transfers using the REFER / NOTIFY method according to RFC-3515 ? SCANARIO: - Asterisk registers with PSTN<->SIP VoIP provider "V" (Vonage) as a friend - Asterisk is located in Europe, Vonage in located US. - Asterisk acts as an autoattendant located in Europe. - Asterisk answers and incoming call from

Hi All, I have installed Asterisk and able to create Users and get them connected to Asterisk after authentication. My question is how can I make calls to different DIAX clients through my Asterisk server. I also have vonage softphone account, using that I tried calling 18882255322 -- Registered 'manoj' (AUTHENTICATED) at 59.93.73.0:4569 -- Registered 'diax'

Hi, I'm trying to get Asterisk to connect to Vonage (softphone acct) to allow me to place and receive calls. I have successfully configured Asterisk to route inbound calls and send them to the correct extension, but I can't get outbound calls to work. I have Asterisk successfully registering with Vonage, but when an INVITE is sent out, I get a "404 Not Found" back from Vonage

Hi All, I tried with different configurations and referred many articles to configure Asterisk with a Vonage account I have but all my attempts failed. I am a newbie and hope this mailing list will help fixing my problem and configure Asterisk. The error I get after I make a call to outside number like 18007633555 is -- Accepting AUTHENTICATED call from 59.93.69.218, requested format =

Hi Nitesh, check out my config that I have for the Faktortel config in the asterisk@home sourceforge forum, you'll probably be able to work out how to set it up from there. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nitesh Divecha Sent: Wednesday, February 23, 2005 4:12 PM To:

I've yet to successfully register and receive calls from my Vonage softphone. I've tried what few examples are given in former post this list and some other forums, but nobody seems to be stepping forward saying it works recently. Either they broke something to where you simply cannot use *, or the config examples need updated. If anyone can show a still working config,

I know Vonage doesn't officially have a "bring your own device" type program, but they do offer a softphone. Has anyone gotten Asterisk to connect directly to Vonage? This would be a great help!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060329/5bc9f644/attachment.htm

I am new to the mailing list, but I am very interested in running my small home business office phone system using Asterisk. However, Broadvoice, a VoIP provider of choice based on my research, is not available in my area. I currently use Vonage VoIP. Their website mentions nothing about being able to link to Asterisk. I was wondering if any US subscribers have been able to configure Vonage

In taking a cursory browse at Vonage's site today, I noticed they are now offering a soft phone. Has anyone had any experience using this? And does this possibly open new opportunities for using Vonage with Asterisk? Just thinking outloud on the list, soliciting thoughts and experiences from others. AJ

I setup a vonage account last year, and cancelled it last night when I put my asterisk box together and signed up for a Broadvoice account to use with it. Now I would like to use my Linksys router as an MTA, but realize it is still programmed with all of vonage's proprietary information and I do not know how to clear it. I understand that just pushing the reset button will not do it.

http://advancedippipeline.com/60400413 "BOULDER, Colo. -- Leading Voice over IP service provider Vonage Holdings has complained to the Federal Communications Commission that competitors are blocking the use of its service, according to FCC chairman Michael Powell and others close to the company. "We're very actively on this case and we are taking it pretty seriously," said

atlast after working of 7 hours i got voange soft account working on asterisk.

Hi All, I've got an * PBX up with couple of stations and now I'd like to integrate my Vonage service for outgoing PSTN calls. Is this possible if I have an account with them that uses their hardware box (ATA186) or do I need a 'softphone' account? thanks...

My asterisk box is behind a NAT firewall. I have friends that are on Earthlink, Vonage, etc. I'd like to make VOIP calls directly to them rather than going through the PSTN. With Earthlink, I can make this work through FWD peeting numbers, but that's sort of a waste of FWD bandwidth. WIth Vonage, it doesn't work. I suspect this is because of the breakage between FWD and Vonage that

All, I have been thru the archives and all the relevant URL's sent to me. I have sent e-mail to those who have gone before me and are attempting to accomplish the same goal - no one has it working?. Doesn't anyone have a WORKING asterisk pbx that hooks into vonage? Thanks, Jerry Roy 562-305-9545 -------------- next part -------------- An HTML attachment was scrubbed... URL:

So Asterisk can't send VOIP calls to Vonage -- but it is still possible to use Vonage for flat-rate long distance by connecting the Vonage AT-196 to an * FXS port, right? The price is an extra D/A <--> A/D conversion. Jim Shilliday IT Director Equal Justice Center 1315 Walnut St. Suite 400 Philadelphia PA 19107 215-238-6970 -----Original Message----- From: Tim Petlock

i have tried to connect my asterisk server to vonage like this: Sip.conf: register => 1<yournumber>:<secret>@atlas-east.vonage.net:5060 [vonage] type=friend username=1<yournumber> secret=<secret> host=atlas-east.vonage.net port=5060 allow=all maxexpirey=15 dtmfmode=inband fromuser=1<yournumber> fromdomain=atlas-east.vonage.net canreinvite=no nat=yes

I stand corrected! However you do get my point ... The bigger the company the worse it is. Having to deal with these guys is a nightmare. The company that brings me out in spots is Rogers Cable (24/7). They have this electronic air-head called "Gertrude" or something, (an android) who can't understand the word "NO" and has trouble with "YES" (actually like my