similar to: Cisco 79XX Ringers & chan_sccp

Hi All, I recently received my Cisco 7970 and have it up and running with 8.0.4 firmware, with asterisk 1.4. Seems to function pretty great so far, aside from a few issues. Here is what I have noticed so far, anybody have any fixes for these issues? 1. Contrary to the forums and lists I've been reading - the phone indeed does register. The little registration animation stays on the screen

Good Day everyone, Yesterday I upgraded the firmware on my 7960 to Sip 8.12 as provided by Cisco, however now the phone does not and will not read the RINGLIST.dat file. I've tried rebooting the phone, tried resetting the phone back to factory, have deleted the RINGLIST.dat file and reloaded the phone then reinstalled the RINGLIST.dat, and still the bloody phone will not read the file.

Anyone know what the file format for the cisco 7912 RINGLIST.DAT file is? I have a RINGLIST.DAT file for a 7960 that is working fine. It's just a list of the ring name and the file name but it doesn't work for the 7912. I've read somewhere that the 7912 needs the ringlist.dat file to be in xml but I can't figure out how exactly it is constructed. Thanks. -- -------------- next

Hi, I'm after two very specific ringtones for the 79xx's... A dog barking, and a horse either galloping or neighing. I've tried making the sounds, but for some bizarre reason they're not working. I used to make quite a few ringtones for the 79xx's, but I seem to have forgotten how to do it! And to top things off, I can't even find the documentation on Cisco's site

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone

I have a done google seaches on convertion and so far they all failed. Rich adamson and wheely-bin.co.uk Here is what I have Laptop running solarwinds tftp with the following files OS79XX.txt <- POS30201 SIP<phonemac>.cnf.xml RINGLIST.DAT <-Ringer1.pcm Ringer1.pcm The phone (7940) is hardcoded to the TFTP ip of the laptop and has a hardcoded ip is was on firmware version:

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

I'm writing a program to quickly generate SIP<Mac>.cnf files for tftp configuration of the 79XX series of Cisco phones and would ask that anyone who is interested in using this please send me working examples of your SIP<Mac/Default>.cnf, and RINGLIST.dat files. Also, please send me your ring tones and * related logos for possible inclusion. Thanks, Christian Hoffmeyer YottaDot

Hi all (is a bit of a Cisco question, but perhaps it's already been asked here). I'm trying to setup a TFTP server for dynamic configuration of my 7960 Cisco phones. Cisco docs suggest I download the following files from their web site: * OS79XX.TXT * SIPDefaultGeneric.cnf * SIPConfigGeneric.cnf * RINGLIST.DAT * P0S3xxyy.bin * P0S3-xx-y-zz.bin * dialplan.xml * syncinfo.xml I only

Hello all, Downloaded, compiled and installed Asterisk CVS-04/15/04-17:54:5. Everything looks fine except I see a pseudo channel in the 'zap show channels'. xxxx*CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo default 1 default The result is, I cant use Zap/g1 in extensions, eg this doesnt work anymore: exten =>

Kevin Walsh noted that his SPA-2000 takes time from his local NTP server in a post back on Fri June 25. Q: Where do you tell it to use NTP? I'm a bit confused as to where my SPA-2000 is currently getting its time. I told it GMT-5 in the misc section but it doesn't really tell me where its going for this. Is it just broadcasting looking for ntp? The net of my problem is that it is 1 hour

Hi I have found in http://lists.digium.com/pipermail/asterisk-users/2004-July/056111.html (Hack to make * -> (H323) -> CCM -> IOS GW work) that i need a special version of chan_h323, because of the External RTP problem. Do you know exactly which version is it? Or do i need an unofficial patch? Thanx Andr?s

Hi, On Friday we changed our Telco-Provider (from German Telekom to Mnet) and recieved new Numbers. I changed the extensions in extension conf to match the new numbers. But i always get: Jul 18 12:10:39 WARNING[245776]: pbx.c:1780 ast_pbx_run: Channel 'CAPI[contr1/89064934]/0' sent into invalid extension 's' in context 'default', but no invalid handler I only changed the

I've tried to compile rate-engine 0.5.2 on Fedora Core 1, Redhat 9 and OpenNA Linux 1.0 and all give me an "Error 1" after typing "make" but with no real reason given. Just a few standard/non-critical warning messages, and then suddenly "Error 1" Anybody successfully compile Rate Engine? The least cost routing module for Asterisk? Thanks in advance.

Folks, My question concerns the SIP Notify that is being sent to ... device. You can see it in the following line: Voicemail: 0/0 Shows no Voice mail but I did leave a voice mail at the extension. Any suggestion on what I should look for in my * setup. I am not worried about the 481 coming back for the other side yet. Once I get a handle on the Notify, I'll work on the 481.

Working on a paging system for one of my sites and running into something I can't believe is this hard. In one of the zones, they want to have three different extensions ring over the pa system, using it as a loud ringer. Now the paging system does have a loud ringer built in and I can easily have it do a simultaneous ring, but all of the extensions will sound the same over the loud

Anyone have some recommended equipment for alerting people to calls in a noisy environment? I have Polycom IP550 phones set up in some really noisy environments - our mine hoists - and they tend to drown out the ringers. I'm using Clarity WR100s now. They're analog devices, attached to Linksys PAP2T ATAs as part of a call group to get a loud (advertised as 95dB) ring out there, but it

Is it possible to get a few 7960's and asterisk to allow all of the 7960 phones to use one extentsion and can only be used by one person at a time, have it indicate on the other 7960's when one of the others has the line engaged. Basicly so like I can setup a rule when an incoming call comes from IAX to divert to this extension, it will ring the extension (thus all phones), and allow me to

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is